View the database name and schema page APEX

Similar Questions

• The project name and Web Page header

  RH7 / WebHelp Pro
  
  I have a project named price management Procedures; my opening splash screen says the same thing. The web page header however, policies and procedures. I can't find the document or the setting that gives me this header name, and I want to change it to price management procedures.

  I can't speak for WebHelp Pro specifically, but there are a few places that you can specify the title in the title bar of the browser. One is located in file > project settings, where you enter the title of the project. If this field is not already say "Price management Procedures", modify and generate your output to see if that solves the problem.

  If you use a context-sensitive help, the problem may come from somewhere else, but we will return if the above does not work. Post back and we do know.

  Hope this helps,

  Ben

• I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  I get a Script Error failed. I think it is because the domain name is on page 1 and the field with the calculation is on page 2.

  The formula is just + Cash.  I don't know how to tell him to look on Page 1.  If I use the same domain on Page 1, the formula works so I know that this is not something in the name of the field.

  

  It received NO response

  Page1.cash should do it. If not, you can use CTRL + click to enter its name in your script.

  1. Select the field that you add the script.
  2. Scroll the design view until you can see the object whose name you need. (Is not necessary if the object is already in mode)
  3. Click inside the script window to place the cursor where you want the name of the other object.
  4. Hold down the CTRL key while clicking the object whose name you need.

• view the HTML source of a page of the apex

  Hello world
  
  I'm looking at how I can view the HTML source of a page of the apex and to be able to change it. That's why reading the html source code in the browser when the application runs don't suits me.
  
  Someone at - it an idea how it can it be possible?
  
  Best regards

  Hello

  Loga is correct on the use of firebug with firefox. However, if you use IE (version 8 or later), press f12 to switch to developer mode. For Chorme, click the right button of the mouse, you'll get a context menu, you can see "Inspect element", which will have the HTML for this object. Yes as Loga said, if you can simulate changes by using these three, you can bring the apex thro generator only changes required, applying changes to CSS, script, models etc. Hope it will be useful.

  Kind regards

  Natarajan

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• How to add the chapter name and page not for reference

  Hello

  How to add the chapter name and page not for reference in indesign CS6.

  Thank you

  Please try variable notion of text

• Display the member name and the alias in Smart view

  Hi gurus,
  
  I have a request from ASO (version 11.1.2.1) where the dimensions of the customer and the provider have names and alias names. Member name field contains the customer number (vendor number) and alias contains the full name. Now, I created a query using the query designer where I selected the "Member name and description" option in the Option Member Smart View menu in Excel. But, while I fetch data from the query, the system only returns the alias name and alias name + not a member name.
  
  Can you please how can I get both? The Smart View User guide says that "Member name and description" displays the full qualified names and descriptions (alias).
  
  Thank you.

  If you want to view the Member and the alias, then this is a new feature in 11.1.2.1.102

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Have not used my email in a long time and I forgot the user name and password

  Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

  Your user name is all or part of your e-mail address.
  The user name and the password is given with your email provider. You need to communicate with them.
  Most providers have a password reset link on their page for help by e-mail.

• Qosmio F55-Q502 cannot use GPS in the Viet Nam and Southeast Asia

  I have a Toshiba Qosmio F55 Q502 with purchase of system built-in GPS Garmin from the United States.
  But when I bring it to the Viet Nam and try to use the GPS, it does not work.

  I open Garmin Mobile PC, just Americans and Europeans of the cards.
  I try to activate the GPS, but the satellite always signal empty.

  I tried to go many places with view of clear skies but cound around ' nt captures the satellite signal.

  If this GPS is Globe Positioning system which means it can be used anywhere in the world.
  I do not know may be my GPS have the problem or the GPS is unusable in VietNam.

  My laptop just to buy a few days and I have not tried the GPS in US before.
  Can someone help me solve this problem?

  GPS should be worldwide.

  You can use a normal GPS for your car? Or as in the Nokia N95 GPS phone?

• New ThinkPad T460p just arrived - the product name and serial number missing from the outside of the machine

  This page shows where the product name and serial number should supposed to be on my ThinkPad: https://support.lenovo.com/us/en/find-product-name?cid=EDM_2016_NA_US_PP_SUPPORT_V2&RRID=1014681098&...

  However, any of these are displayed on the outside of my machine anywhere.

  I happen to know the product name and serial number. I was able to find other ways - that is not the issue. As far as I know, these physical labels should have with the machine.

  Was it simply a mistake during Assembly, or Lenovo just stopped putting on these labels? If the first case, is there a way to ask Lenovo send me these labels? If the latter, Lenovo might consider updating the page linked above.

  Any inisight would be duly appreciated.

  Nicholas

  My T460p shows the T460p at the bottom right of the screen and the serial number and the code of the product under the battery. But the T460 is very dark on the corner of the screen, and Seraglio/product numbers appear on the very dark black label under the battery.

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve

• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• Can I change the host name and the IP of the ESXi servers?

  For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.

  I can change it directly? or view desktop computers will be affected by the change?

  This thread will help you

  Re: Hosts view change ESXi and Vcenter Ip addresses

  If you found my answer helpful, review the allocation of points by choosing answers useful/correct

• Dreamweaver update don't forget the account names and passwords?

  This morning I did the update thing Adobe and it hung five applications, including Dreamweaver which I was working.

  I closed Dreamweaver and click [continue] and he finished. I am now running Dreamweaver 11, build 4916.

  I restarted Dreamweaver and made some changes to the page I was working on and has saved those and got an FTP error.

  Poking around a bit reveals that there is now no account name or password specified in my settings of the Site. And that's for ALL sites!

  Well, calm down... breaths of e e d p... We will re - import Sites using the old files .ste, right? They were created with the choice to save the account names and passwords, too. Point, click-click, the construction of the new site [2] and edit the page, save the changes and Boom! FTP error, once again.

  How can I fix it, please?

  Adobe aknowledges that question in the document of the basis of knowledge and skills associated with the update. I think that to solve it, you just need to restart your computer after the update to Dreamweaver.