View the VMware Virtual Audio volume settings (DevTap).

Similar Questions

• Storage on iSCSI - mounted directly from the VMware virtual disks

  I am setting up a HUB/CASE/box Server mailbox of all-in-one for fewer than 500 users on a Windows 2008 R2 virtual machine and am about to configure the storage I need. The two words that I can't wait to hear more from Microsoft PSS is "not recommended" or "not supported." I have a Dell Equalogic PS6000 and have the ability to 'direct attached' compared to the VMware virtual disks for storage of mailbox databases. We run vSphere with vMotion, etc..

  Using virtual disks bad practice? Advantages or disadvantages I should know about? Adding a layer of complexity that might come back to bite me?

  I have a very similar setup and am currently using directly attached iSCSI volumes EqualLogic berries for my Exchange 2007 mailbox stores.  I also have the role of running UNIFIED messaging that works in fact remarkably well even if everything is running on a virtual machine.

  It was in large part because the EqualLogic recommendations had to use directly attached volumes so that taking snapshots multi-application/replication tools worked correctly.  If the Exchange mailboxes are held on a VMFS volume, then Tools EqualLogic will not be able to get to them.

  Microsoft have been OK on this configuration, and I actually had them made up our VM, one or two times when we iron out some problems of UNIFIED messaging (although I hide icon "VMWare Tools"!).

  The best thing to do would be to create volumes you think you'll need and attach them directly to the virtual machine using the Microsoft iSCSI initiator, and then run the Exchange tool (I forgot his name) to test the storage for speed and capacity.

  See you soon.

  Chris

• Error 1067 by starting the VMware Virtual Center Server service after the upgrade to VCenter 4.1

  I've started with VCenter 4.0 update online success in 4.1u1

  but now I can not start the service with Error 1067 by starting the VMware Virtual Center Server service.

  I did the upgrade online in VCenter 4.1u1 with this iso file VMware-VIMSetup-all - 4.1.0 - 345042.iso and now the entire production is declining.

  I use SQL Server 2005 32-bit as the database.

  Any kind of help would be greatly appreciated please?

  I guess it's all true by:

  http://KB.VMware.com/kb/1022104

  http://www.VMware.com/support/vSphere4/doc/vsp_vc41_u1_rel_notes.html

  And what exactly is a failure, is the DB on a different server or living on the vCenter Server?

• Setting for the main menu audio volume problem

  Disc Menus, using the menu template of Ladybug that comes with first Pro Elements 9 and has chosen an audio clip to use as the intro Music tab.  I need to adjust that lists the volume to better adapt the basic video/audio level.  Ideas?  The audio mixer panel shows not only the beach.

  Thanks in advance!

  Welcome to the forum.

  I think that Audacity, or similar, is the best way to handle this.

  As I usually do DD 5.1 SS, for my projects and my Menus, I just create a sequence of Menu in PrPro and edit my Audio (or video may be too, if I have a groundswell in the Menu), but like the pre doesn't have sequences, we could create a new project to do this. Yes, Audacity would be much easier.

  Good luck

  Hunt

  PS - same App. needs, again, to have audio Volume adjusted outside the program of creation of creation full Adobe.

• Lack of access to the balance of audio volume control

  The balance function is 'available', but now hidden in Windows 7. Is it possible to use a script or macro to quickly access the balance control? W7 the access sequence for me is 1) Windows task bar (click to view)--> Start (button)--> Control Panel (list)--> material & audio (hyperlink)--> system (hyperlink) change sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  A previous post, "can not balance sound in Windows 7", addressed to this situation with a label that showed more frustration a question. The response was useless for recommended action reduces the string above: click right volume (icon)--> (list) of sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  My comments are: 1) I could not designed access more complicated if I had a degree in software development. 2) what's up with "Key 1" and "key 2"? People have a left ear and right ear. (3) I read that more than 10% of the American population live with hearing loss. The loss is not symmetrical. A balance of ready-access control is an important element.

  Please consider to improve this feature.

  Hello
   
  Can you tell us if there is a volume icon in the system tray, if not then please follow these steps below to activate the volume icon in the system tray.
   
  1 right click in the taskbar near the time display and you'll get a context menu.
  2. click on properties.
  3. under the system always icons display, check the volume.
  4. click on apply.
   
  Also note the way the quickest way to change the volume of your computer speakers is to click the speakers button in the notification area of the taskbar
  Right-click on the "speaker" icon and select the open volume mixer.

  1. on the speaker, once you get the properties of speaker.
  2. Select the levels tab.
  3. here, depending on the output device, you can goahead and balance the left and right output device.
  4. it's only the easiest to access the balance of volume.
   
  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
  https://connect.Microsoft.com/dashboard/Info/

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• How to run the VMWare virtual machines in Microsoft Azure cloud?

  How to run VMware Windows Virtual machines to Microsoft Azure cloud?

  Thank you

  Vincent

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Hyper-V inside the VMWare virtual machine

  We are eager to try NxTop VDI virtual computer (www.virtualcomputer.com). The center of NxTop management software requires Windows Server 2008 R2 64 bit with HyperV. We don't have an additional physical host to install Server 2 k 8 with HyperV just for this test. Has anyone already installed server 2 k 8 WITH HyperV inside a VMWare VM before? I tried and windows installs fine but when I go on installing HyperV it says that it cannot install HyperV because the processor is not in the current VT. I know it's an intel VT cpu and I made sure it was enabled in the BIOS. Any ideas?

  Even if your physical processor supports VT, virtual CPU virtual machine does not work. VT is not spent to virtual machines.

  André

• My audio volume calls iPhone 5 s 2.5 years is slightly lower than before.

  HI guys

  When I compared my iPhone for 2.5 years 5 s with a newly purchased device iPhone 5 s, the volume is quite low.

  I checked store  wth. They ask me to replace the cost, which is unaffordable for me.

  What is expected? No iPhones more slow performance down after years? I have no flaws found in my performance iPhone iOS 10 except the problem of audio volume.

  Help me with this. Restoration work din

  If it does not restore like new, then you can buy one off replacement under warranty.

• VMware View 5.1.2 Audio problem

  I noticed audio seems to ignore every 4 to 8 seconds on agent 5.1.2 of the view, this isn't on 5.1.1 appearent.

  This happens on pandora, youtube. I thought that this could be related to flash but I then tried on windows media player with a mp3 player and it still does the same thing.

  This appears on the view client 5.2, on windows machines 7. 1 Tera and 2 p45, samsung nc240m

  blades of g8 for hp 799733 esxi5.1.0

  anyone having simular problems?

  Not sure about the solution to this problem. However, since you are using customer Teradici light I would say with the audio driver Teradici is available on their site. You will need to register for their website to download. Make sure you get the latest version, since there seems to be some older versions of the driver there. It seems to work pretty well. Make sure that you disable the DevTap driver installed by the VMWare tools.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• 7 - fusion '3D Acceleration requires an update of the VMware tools in the Virtual Machine'

  Hello

  I installed the free Fusion 7 trial this week on my iMac and subsequently installed Windows 8.

  The resolution of the screen under Windows is very low compared to the Mac OS.

  In addition, I have the warning message in the Windows display settings:

  '3D acceleration requires an update of the VMware tools in the Virtual Machine'

  I also note that the display driver in Windows is the display driver database with Microsoft.

  A few weeks ago I installed version 6 of Fusion and it worked very well.

  Any ideas?

  Thank you

  John.

  Take a look at the installation and the use of the VMware tools and more spicifically to manually install or upgrade VMware Tools in a Windows Virtual Machine.

  If by chance, VMware Fusion is not properly mounting image VMware Tools windows.iso file then you have to do it manually.  It is located in "/ Applications/VMware Fusion.app/Contents/Library/isoimages/windows.iso" and will have to be copied, not moved, in a location that is accessible out of the bundle of VMware Fusion.app as the office.  If you need to do this, you can right click on the bundle of VMware Fusion.app see the content of the selection box and access its location to copy.  To assign the windows.iso on the CD/DVD image, take a look at: Connect and Set Up a CD/DVD Drive

• Error: Running VMware ESX in a virtual machine requires the external virtual machine

  We are running ESX Vmware 5 on a virtual test in ESX 4.x environment and machine unable to start the virtual machine on Vmware ESX 5. with the following error.

  Error: -.

  Running on a virtual machine VMware ESX requires the external virtual machine is configured to run a VMware ESX guest operating system. You can not power on a virtual machine until the external virtual machine is reconfigured.

  We found after KB

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1030283

  Howerver, I'm not able to find the option

  1. Select the virtual machine that is running ESX.
  2. Go in VM > Settings.
  3. Click the Options tab.
  4. Select the General settings.
  5. Under Guest operating system , select VMware ESX.
  6. Click OK.

  We are not able to find this option in ESX 4, so we can run this VM.

  Please help urgently...

  Kind regards

  The log file looks good now.  However, it seems that ESX 4.0 is older than I remembered.  Please, add the following line to your ESX VM configuration file and try again:

  monitor_control.restrict_backdoor = TRUE

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.

• "the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

  All,

  Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.

  Any help would be appreciated.

  Thank you.

  vmnoob

  We support only a few specific versions of ShadowProtect.

  > StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2

  There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:

  1. dynamic disks are not supported.

  2. all the images in the backup of a machine must be in a single folder, without other images placed there.

  3. for incremental images, so 16 incremental backups are supported.

  4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume

  5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.

  5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How to fix the loss of control of the audio volume?

  The speakers on my laptop work well, apart from any browser. However, in FF or IE audio volume is stuck barely audible, even if I have the volume of the wheel set up. I'm in a Windows XP, using FF 16.0.1 environment.

  After removing and reinstalling Flash Player 11, I noticed that the sound control on each video has been set to minimum. I just slipped the sound control upward at the bottom of the video in question, and I got sound. I don't know what caused the sound to zero at least, but the problem seems to have been resolved. I hope that more than a few hours this time.