Xbox 360 Driver does not

Similar Questions

• Why xbox 360 controller does not work with all pc games

  Why xbox 360 controller does not work with all pc games

  Ask in an xbox forum.

• xBox 360 controller does not at all for PC

  I downloaded and installed the Xbox 360 accessories. And installed everything and everything I plug the controller. When he was done, I rebooted my computer and plugged into the controller. He has ALWAYS installed the plug-and-play driver and is the only driver that appears in my device manager. It does not show the HID - controller game or the other. And in the xbox controller tab, it shows the plug-and-play/charge kit driver.

  Now, I completely uninstalled, restarted, and redone it... two times... and at the same time UNIQUE of EACH result. I use a wireless controller - but I'm on the wired USB plug on it, to make wired. -What is the problem?
  I am using Windows 7 64 bit

  Hello

  I suggest you to ask your question in the xbox 360 support forum here: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Thank you.

• Xbox 360 atomatic does not detect the investigation period while I use WRT54G

  While I have the xbox 360 plugged since the WRT54G just does not detect, man I even use the modem and still does not detect it so I removed the cable from the modem to the xbox 360... I'm confused, I played the xbox 360 before using the xbox 360 of the of my brother and he still connect but now I can't after that I updated the firmware for the wireless, but this isn't a problem, I was still able to detect... Is there a setting that I probably did and I don't know how I did it in the first place

  What I do not get in I am able to go on the easy internet wii

  It is very important to always check the cable cause I just did and it connects now so problem solved.

• Xbox 360 gamepad does not work on PC, TRIED EVERYTHING.

  As the title says, I literally went to every length next to the purchase of a new controller for that to work, I tried for about a month now. I have tried every thing simple that everyone suggested on the forums and here as well. Simply, he doesn't get the drivers. I downloaded them, still are not. He knows it's a joystick, but won't actually run it needs drivers, but they NEVER WORK. I've tried EVERYTHING. It's so hard to play with only one controller.

  Hi Erik,

  Please contact Microsoft Community.

  I understand that you are not able to use the joystick on the computer.

  Sorry to hear about the inconvenience caused.

  This could be caused due to the following reasons:

  Joystick problem.

  Installing the driver several blocking drivers.

  User profile problem.

  Follow the suggestions below and check if this can help:

  http://www.Microsoft.com/hardware/en-in/p/Xbox-360-controller-for-Windows#support

  This link will give you the driver for windows 7. Please choose the good architecture and download it.

  http://support.Xbox.com/en-za/Xbox-360/accessories/connect-wired-controller-computer

  This article explains how to connect the game controller to the computer.

  Note: you must completely uninstall the previous drivers that are installed on the computer for this game controller.

  Please refer to this article where Sharief K responded on December 28, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Xbox-360-wired-controller-driver-will-not-install/e4e1e91d-e366-4951-9a1b-406bc5d4a68e

  Additional information:

  You can also create a new administrator account on the computer, and then try to connect the device:

  Please refer to this article, this will explain you about creating a user account.

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7

  And refer to: my computer is in a workgroup

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• XBOX 360 controller does not control

  I try to use my XBOX on my PC wireless controller, it seems to be installed correctly (that is, it is correctly identified in the list of devices [as 'XBOX 360 wireless controller via Play and Charge Kit,' which is how it is connected], identifies correctly connected to the USB port [I moved it a few times to check]).  But it does not work for the 2 games I tried (BioShock 2 and Tomb Raider, both downloaded via Steam).  One of the games (Bio2) even has an option to enable or disable the XBOX controller, but when I try to click on the button 'ON' it will not activate, and 'OFF' option remains on.

  Hi John,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I want to that re - ask your question on the Xbox forums for assistance on this issue. Forums are discussed by various professionals and other members of the community specifically discuss and determination of issues related to the Xbox controllers and gaming consoles.

  Xbox forums

  http://forums.Xbox.com/xbox_forums/xbox_support/xbox_one_support/f/4269.aspx?sort=active&PageIndex=1&ThreadSortBy=LastPost&SortOrder=descending

  XBox 360 - Support

  http://support.Xbox.com/en-us/pages/default.aspx

  I hope this information is useful. For any other question related to Windows, please feel free to post on the Microsoft Community Forum. We will be happy to help you.

• pc Xbox 360 controller does not work

  I just bought this controller and installed. Game hand light flashes and the wireless receiver has no active light power when plugged to the USB port. I have a dell Inspiron that means I have no power to my USB port and can not use this controller, or could there be another problem.

  Hi sluggie371,

  I hope you do well. First of all, whether it is a hardware problem! Please, try to connect the controller to a different computer and check.

  If in case it's a hardware problem, you may need to contact the manufacturer. However, you can try with the article below for steps that you can follow.

  http://support.Microsoft.com/default.aspx/KB/906347

  Please, try the procedure described in the link above and let me know if it works.

  You can also try uninstalling the software of controller and then reconnect the controller. The software will be automatically installed.

  I hope that this solves the problem.

  Please let me know if you need assistance.

  Concerning

  Rehman

• Messenger XBOX 360 keyboard does not work

  Is it me? I believe 2 of them, have Xbox Live account, connected to Xbox Live, keypad connected to the controller, it snaps, I know it's connected, but NONE touch backlit, nothing happens.
  Any help?
  Thank you

  Hello

  The question you have posted is related to the X - box and would be better suited to the Xbox community. Please visit the link below to find a community that will support what ask you:

  http://forums.Xbox.com/

  Also take a look at the article below:

  http://support.Microsoft.com/kb/942258

• External CD drive does not recognize the CD burned on El Capitan.

  Using El Capitan 10.11.5 and an external hard drive, I have burned successfully mp3 files iTunes CD - I can play on the computer itself - but an external CD drive does not recognize, even if the Player recognizes the discs once engraved on Snow Leopard and previous models.  What's wrong? I burn "at the fastest possible speed," as I have always done.

  What CD format?  If you burn it to a CD mp3 this is not very common for a standard CD player to be able to read those.  You may have burnt the other CD audio CD format.

• Seagate 2 TB external hard drive does not register

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  I'd appreciate any help you can give. Thank you!

  Riley G. says:

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  If it shows in disk utility > file >Mount

  
  

• P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not

  Version of Windows 10 Home 1607 (Build 14393.187)

  Hello

  After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
  The D: drive does not appear in Windows Explorer,
  CD-Audios and videos / DVDs do not work.

  In the Device Manager, the following legacy status error message appear:
  "Windows cannot start this hardware device because its configuration information.
  (in the registry) is incomplete or damaged. (Code 19). »

  Could you tell me how to solve this problem?
  Thank you.

  The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
  I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.

  More information here:
  http://www.borncity.com/blog/2007/08...-verschwunden/

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Re: CD/DVD drive does not seem to start the DVD in Satellite P750

  My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.

  Anyone?

  Help, please.
  Thank you!

  Have you tried to change AutoPlay settings?
  Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games.

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye