view vi as the value of the integer reference number

Similar Questions

• In the payments/accounts payable modules where the payment reference number is defined?

  
  Hello

  I hope someone can help. Is the reference number of the payment, an internal sequence number of Oracle or can you change it in the app? If Yes, where?

  Thank you very much

  Paul

  I managed to find the information I was looking for this topic. Thanks anyway... Paul

• Once again on alignment to the right reference numbers with GREP

  For some jobs, I want the reference numbers in the notes align with the period that I have Options of IDCS4 reference Add (with an en space) as the separator between the number of note and the note text.  Not much so I set the paragraph style reference with a tab 'Match point' and then insert this tab at the beginning of the note.  I recently stumbled on this thread of 2009 where RodneyA that describes more in detail, and Eugene Tyson added a GREP search to automate the addition of tab: replace (~ F) with \t$1.

  I can't get this to work in IDCS4.  It worked in earlier versions?  Earlier this year, Jongware explained that GREP can not replace a reference marker, only to watch in front of or behind the marker to replace anything.  Unfortunately, in my notes nothing before the marker reference of GREP replace until I manually put my tab there.  Addition of these tabs to hundreds of notes by hand is not if bad (jumping with Ctrl + arrow keys) and ID's of the propensity to consume a way occasionally note, I need to check all the same.  But I was mistaken in thinking that if I want to automate the addition of tabs I you do this via JSX?

  Thank you

  David

  David, indicating when that you can't get something working, I must also tell you why

  But when I tried your "replace (~ F) with \t$1 ' for me it became real obvious right away: the code ~ F is not only 'the footnote reference number' but also the note itself in the text. So, it all works in the sense that you get a tab before the code of reference number, you get loads of additional tabs in your text as a bonus.

  There are several ways around this. The most obvious is to limit the operation replace all paragraphs in style with your reference style. If it is a single (mine is usually), it will work immediately. It is the first response of Eugene in the previous thread - possiblly you forgot to put this paragraph in the field Format style find.

  Another way is to add a tab only when the code of reference number is the beginning of a line:

  ^ ~ F

  replace it with

  \t$0

  (You're right noticing the trick 'postanalyse' cannot be reversed for an advanced search for just "opening of the line followed by the code of reference numbers". "It's the special flavor of an InDesign GREP Limitation).

  This may fail if you have a note at the beginning of a paragraph

  Still another way is to try to make use of the vertical position of the code reference number. If your references are superscript (which is fairly regularly) and the numbers in the notes themselves are not (that they may or may not be), you can search

  ~ F (+ position: normal)

  and replace with himself more a tab before, as shown above. (A variation would be to use a style of character for referrals by exposing and seek [none] style to pick up those inside notes characters.)

• Unable to import photos from an SD card. CAN copy a file from the SD card on the desktop and the view. can display the file to the SD card. When trying to copy or move the file to a folder, I get an error message: cannot copy IMG_0242: the parameter is

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  =============================
  I do not think that the 'Read only' attribute of your
  file is the problem... in fact, it is typical.
  All files on my XP Pro system have a
  Square marker (not checked) to playback
  Only the check box.

  If you want to experiment the following article...
  explains how to change the read-only attribute.

  (326549) you cannot view or change the
  Read-only or system attributes
  in Windows Server 2003, Windows XP, in
  Windows Vista or Windows 7
  http://support.Microsoft.com/kb/326549/en-us

  More information in the following article:

  Why can't erase or reading the value
  Only attribute checkbox on a folder?
  http://www.jimmah.com/Vista/security/read_only_folders.aspx

  Now for the photos... lets make an experience.

  Open your folder my pictures and create a new folder...
  File / new / folder... (more on this shortly)

  Insert your SD card into your Media Player. Do not forget
  to slightly press the card at the bottom of the slot.

  If the Autorun screen opens, close it.

  Reach... My computer or on the removable click
  Disk that corresponds to the location of your card is in.

  In the menu... Choose... Explore.

  You should be able to see the directory of the card.

  Open the folders and find pictures.

  Reach... Edition / select all... then... Edition / copy.

  Right click on the new folder that you created in my
  Images, text and the menu... Choose... Dough.

  Transfer files or you still receive the error?

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Folder view settings and the desktop icons.

  Hello

  Today, I turned on my computer to find the sight of my account settings are changed and salis.  I also found my command to change the icons of the bureau and all messed up.

  Since I bought my computer, I used the settings of Windows Vista Home Premium by default for folders.

  I have not downloaded anything or update of Windows Vista Edition Home Premium.

  If I turn on "Remember folder view settings" in the folder options - nothing else happens - have seen all I don't want their value and open them in small windows.

  Is someone can you please tell me why this happened?  Could this be the results of a hacker?

  The second option resets all display settings. These next two commands to reset the default values defined by you.

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

   

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

   

  Reset saved settings will allow you to change the settings.

   

  This allows to get the same thing as shexvw.

  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box everything left on the tab EXPLORER...

  Reset. If this resolves your wake problem half of the items until you find the one that.

   

   

   

  Understanding saved views and navigation records
  In Windows 2000 Professional, the view you use is not always permanently saved in Windows Explorer. You can control if the views that you use are stored permanently or temporarily, to help to memorize check box of each folder view settings tab display of the dialog box folder Options (see figure 9.3).

  By default the Remember each folder view settings is enabled. When you choose to leave this setting is enabled, the following occurs:

  changes that you make to the folder view are saved automatically when you close the file.
  b. the display allows you to display a folder is not applied to other folders.
  c. When you open a folder, it opens in the view that you used when you last time there.
  When you clear the checkbox for don't forget to display settings for each folder, the following occurs:

  a. When you start Windows Explorer, the first folder that you discover poster in saved view of the folder. Explorer Windows holds who discovers in the temporary memory and applies it to all the files that you have visited while Windows Explorer is open, unless you manually change the view.
  b. as you navigate to other folders (after having opened the original record), the view saved for each folder is ignored, and when you exit Windows Explorer, the folder view that you used to display multiple records is cleared from the temporary memory.
  c. the next time you open Windows Explorer, once more, the saved view of the first folder that you open that determines how you display multiple records.
  Setting all folders on the same point of view

  
  Some users want to have all their Windows Explorer folders defined on the same point of view. In Windows 2000 Professional, the default is that any changes to the view of the file is automatically saved when you close the file and are not applied to other folders. However, you can set all folders to the same view by using the Folder Options command, as described in the following procedure.

  To set all the folders on the same point of view
  1. in my computer or Windows Explorer, set the display according to your preferences.
  2. in the Tools menu, click Folder Options.
  3. in the Folder Options dialog box, click the view tab.
  4. under folder views, click on like current folder.
  Important remember view settings check box each folder under the view tab of the Options dialog box of records (see Figure 9.3) affects how the display settings for individual records are applied and saved. For more information on the impact to disable this check box, see "Understanding saved views and navigation files" earlier in this chapter.

  Windows 2000 Resource Kit

• How can I remove selected Custom view (s) of the event viewer Console tree?

  I looked at the MMC Help on create and manage custom views.

  I can't find a way to remove the custom filter views in the Console tree, which can be found on the left side of the event viewer.

  How can I remove selected Custom view (s) when they serve no more values?

  Problem solved

  I asked this question because I was unable to see what was going on in the event viewer and I couldn't find help in mmc HTML Help. However, now I see what's happening and I can give you a solution to my own question.

  Cause

  If I connect to the computer as a user with administrator privileges, I am able to use the event viewer to create a custom view filter that can be used by all users who have access to the event viewer. If I fix remove a view filter custom Console tree, I can't delete it unless I'm logged in as the user who created it.

  Solution

  1. Log the computer as the user who created the custom view.
  2. Start Event Viewer
  3. Use the right-click of the mouse on a custom view filter selected in the Console tree, open the drop down menu.
  4. Delete appears fourth in the bottom of the menu if and only if you are logged on as the user who created this view.
  5. Select Remove to remove the filter to custom view.

  If Delete does not appear in the drop-down menu, then it may not possible you connect as the user who created the custom view.

• My Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1

  My computer (W7/64) sometimes fall to restart. I checked HD and the memory of Mrs. rescue disk - no error.
  Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1.
  The fact is that the cd-rom drive is behaving oddly. Reads the DVD of film without problem, but does not read floppy disks to install Windows (good on an another two comps).
  I therefore launched Verifier.exe and checked the other drivers. The result is dumpATA.sys is not running. (Is BTW not MS driver?).
  How can I force to load this driver?

  I checked the installation disc to compare the original version, boot.win opened, but the pilot is nowhere. Where did it come from?
  So I recorded the dump file, but the analysis of what this file is beyond my capabilities.
  Link to my file https://skydrive.live.com/redir?resid=4AF01405E5CE0354 dump! 114

  You could any body help me to find the source of my problem?

  Thank you.

  These are all good things:

  *****************************************************************************
  * *
  * Bugcheck analysis *.
  * *
  *****************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: 0000000000000020, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000009d, error state (state code of e/s normally)
  Arg3: fffffa80077f95b8, the current process (virtual address for the lock type 3 or PTE)
  Arg4: 0000000000000000, virtual address that could not be paged in (or the contents of the PTEs if arg1 is a PTE address)

  Debugging information:
  ------------------
  ERROR_CODE: (NTSTATUS) 0XC000009D - STATUS_DEVICE_NOT_CONNECTED
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000009d
  CUSTOMER_CRASH_COUNT: 1
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Nom_processus: System
  CURRENT_IRQL: 1
  LAST_CONTROL_TRANSFER: from fffff80002c7fcac to fffff80002c8bc00
  STACK_TEXT:
  fffff880 '03578-88 fffff800' 02c7fcac: 00000000' 0000007 a 00000000'00000020 ffffffff 'c000009d fffffa80' 077f95b8: nt! KeBugCheckEx
  fffff880 '03578-90 fffff800' 02c74ba7: fffffa80 '077f9550 00000000' c000009d 00000000 00000000' fffffa80' 077f95e8: nt! : FNODOBFM: 'chain' + 0 x 50080
  fffff880 '03578b 50 fffff800' 02c7e617: fffffa80 ' 07654b 50 fffffa80 '07654ba0 fffffa80' 077f9550 fffffa80 ' 077f95b8: nt! IopCompletePageWrite + 0 x 57
  fffff880 '03578b 80 fffff800' 02c8181d: fffffa80' 07654b 50 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
  "fffff880 ' 03578 c 00 fffff800 ' 02c4e4fb: 00000000 00000010' fffff800 '00b 96080 00000000 00000000' fffff800' 02c229a0: nt! KiCommitThreadWait + 0x3dd
  "fffff880 ' 03578 c 90 fffff800 ' 02c229fa: fffffa80 '07654b 50 00000000 00000001' fffffa80' 069ed040 00000000' 00000000: nt! KeWaitForGate + 0xfb
  fffff880 '03578ce0 fffff800' 02f29ede: fffffa80' 07654b 50 00000000'00000000 00000000'00000080 00000000'00000001: nt! MiModifiedPageWriter + 0x5a
  "fffff880 ' 03578 d 40 fffff800 ' 02c7c906: fffff800'02e06e80 fffffa80 '07654b 50 fffff800' 02e14cc0 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a
  "fffff880'03578 d 80 00000000 00000000': fffff880'03579000 fffff880 ' 03573000 fffff880 ' 03578a 80 00000000 00000000': nt! KxStartSystemThread + 0x16
  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + 50080
  fffff800'02c7fcac cc int 3
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + 50080
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nt
  Nom_image: ntkrnlmp.exe
  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6
  FAILURE_BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080
  BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080

  And this page explains what you have:
  http://msdn.Microsoft.com/en-us/library/Windows/Hardware/ff559211 (v = vs. 85) .aspx >
  (Short version of an argument 9 d: "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive.")

  It seems to intimate that it's a hardware problem rather than a driver. You say that you are having problems with the optical drive. If you log out, you still have problems to restart or boot?

  This probably isn't a memory problem, but a better method of verification, it is with Memtest86 + http://www.memtest.org/#downiso>
  Download the ISO and then create a CD with it and boot from it. If you have more than one piece of RAM, pull all but one test, then close, replace it with another and test, etc. I find it a little faster than the test at a time.

  SC Tom

• validate the integer in inputtext [table]

  I enter text in table and I need to validate whether the value is an integer.

  For this I used a convertNumber with properties:

  < af:convertNumber

  hintPattern = "#{LoggedUserBean.mapTranslations ['MSG_INTEGER']}" "

  messageDetailConvertPattern = "#{LoggedUserBean.mapTranslations ['MSG_INTEGER']}" integerOnly = 'true' "

  model = "^ [1-9] [0-9] +" * $"minIntegerDigits ="1"type ="number"/ >"

  and text input:

  < af:inputText value = "#{row.bindings.QtyPerBox.inputValue} '"

  label = "#{LoggedUserBean.mapTranslations ['COLUMN_QTY_PER_BOX']}" "

  required = "#{bindings." PackOriginDtl11.hints.QtyPerBox.mandatory}.

  columns = "#{bindings." PackOriginDtl11.hints.QtyPerBox.displayWidth}.

  shortDesc = "#{bindings." PackOriginDtl11.hints.QtyPerBox.tooltip}"id ="it5.

  autoSubmit = "true" inlineStyle = "" text-align: right; ""

  Disabled = "#{backingBeanScope.backing_PackOrigem.ViewMode} '"

  maximumLength = "7" >

  < f: validator binding="#{row.bindings.QtyPerBox.validator}"/ >

  < af:convertNumber

  hintPattern = "#{LoggedUserBean.mapTranslations ['MSG_INTEGER']}" "

  messageDetailConvertPattern = "#{LoggedUserBean.mapTranslations ['MSG_INTEGER']}" integerOnly = 'true' "

  model = "^ [1-9] [0-9] +" * $"minIntegerDigits ="1"type ="number"/ >"

  < / af:inputText >

  However, is a message error everytime I go just for a number as 22.

  Why?

  version of myjdev is 11.2.4.0

  Ok. That's what I thought. Once again, listen you specified is incorrect. The model is used to format the number only. It looks at "# 0.0" to allow a number such as 0.5 or 25.7 or 328.0 "»

  The model is not used to validate the number he just puts it. You got the error because the 22 were not in the given format, which does not valid numbers because it is wrong for this purpose.  Click the link in my first post and read more about the models.

  To use a regular expression to validate an entry, you can use a http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html af:validateregexp

  Timo

• VC die randomly and the windows event viewer will display the following error message

  Hello

  in the last time we are experience a lot of vc crashes and the windows event viewer shows the following error:

  ORA-01483: invalid length for the DATE or NUMBER variable binding

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  ORA] ORA-12899: value too large for column 'VPXADMIN '. "" "" VPX_VM '. "" IP_ADDRESS"(real: 40, maximum: 16)

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  There is no update or modify the software to vmware esx/vc or oracle.

  Anyone has the same problem or have a solution/fix for this problem?

  Environment:

  Oracle 10.2.0.3 DB

  Virtual Center 2.5 U3

  VMware ESX cluster

  Vmware ESX 3.5 Server Patchlevel 1 x 143128

  3 x Vmware ESX 3.5 Server Patchlevel 123630

  This is a known bug in oracle - 10.2.0.3. Upgrade to 10.2.0.4 or install the Oracle patches 6085625 and 6452485 (as far as I remember you just one of them, but for the moment, I can't say that one)

  --

  There are 10 types of people. Those who understand binary and the rest. And those who understand the gray code.

• view set or the aggregate function

  I would like to get the result of the testcase following (using a parameterized cursor) with a simple select statement.
  As far as I know, there is no set views and I couldn't solve it with a function of aggregation (lack of experience).
  The point is: I need WHERE conditions in a fairly complex nested subquery and I would like to set it as in the slider below.
  How can I achieve this?
  Thanx.
  
  * < testcase > *.
  create the dummy of the table (id number 4, subsist date);
  insert dummy values (1, to_date(20090807,'YYYYMMDD'));
  insert dummy values (2, to_date(20090707,'YYYYMMDD'));
  insert dummy values (3, to_date(20090607,'YYYYMMDD'));
  insert dummy values (4, to_date(20090507,'YYYYMMDD'));
  insert dummy values (5, to_date(20090407,'YYYYMMDD'));
  
  Set serveroutput on
  declare
  operation (low, large date date) is
  cursor curs (low, large date date) is
  Select * from where dummy subsist between low and high.
  Start
  dbms_output.put_line ('- test-');
  for rec loop curs (low, high)
  dbms_output.put_line (rec.id |) » '|| Rec.theDate);
  end loop;
  end;
  Start
  test (to_date('01012000','DDMMYYYY'), to_date('31122010','DDMMYYYY'));
  test (to_date('01052009','DDMMYYYY'), to_date('01072009','DDMMYYYY'));
  end;
  /
  * < / testcase > *.
  
  * < output > *.
  -TEST-
  1 07.08.2009 00:00:00
  07.07.2009 2 00:00:00
  07.06.2009 3 00:00:00
  07.05.2009 4 00:00:00
  5 07.04.2009 00:00:00
  -TEST-
  07.06.2009 3 00:00:00
  07.05.2009 4 00:00:00
  * < / output > *.
  
  Edited by: user7393269 the 07.08.2009 07:12

  Uh, well, Yes, of course, blush, thanks Rob.

  This example is more appropriate:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:906341500346611919

  My work memory as FIFO instead of LIFO, regarding recentness of examples, I remember, it seems ;)

• Why does the integer type change the number when changing a table?

  I have converted a MSSQL to Oracle 9i database using the sql developer tools.
  I got almost all the questions developed, however, oracle has changed any data mssql to number integer (10,0) in oracle.
  When my code performs a comparison of returned field value that fails because it compares (1 d) to 1.
  When I try to change a column type, or even add a new column to a table, I select integer but oracle change number.
  
  How can I change a data type of integer?

  Hello

  Oracle is not a built-in integer data type, but it accepts integer ANSI. Just as for Oracle that is stored in any case as the user Oracle number type. Don't worry about this. Oracle know that your number is an integer. When you make comparisons just compare your number, you don't need further clarification.

  Regrards

• Impact on performance at the addition of materialized view logs at the tables?

  I write a very complex query for a client of our database system transaction and this will require the creation of a materialized viewbecause, all attempts at development to make acceptable performance failed.
  
  I want to activate the fast refresh the MVIEW but I am confused about the consequences of the addition of the addition of materialized view logs to the base tables.
  
  Some tables are large and involved in a large number of transactions and I wonder if the INSERT/update performance will be seriously affected by the presence of a newspaper mview.
  
  Maybe it's a simple question, but I was unable to find an answer very clear in the literature.
  
  Thanks for all the answers!
  
  Chris Mills
  Biotechnology data management consultant

  There is an overload for the newspapers of the view materialized, a little less, but roughly on par with a trigger that writes to a table.

  If it is an OLTP system where you do a lot of low-value transactions, the general expenses percentage is probably not particularly great, something in the range of 5-10% maybe (although, of course, by running tests in the development environment would be desirable). If there are loads in bulk, the impact of the percentage could be higher.

  Justin

• Empty the Trash: file &gt; empty trash should work in any view, not only the display of the trash

  38.3.0 W8.1, W10
  It is probably an enhancement request...

  Often, I emptied the Recycle Bin. There are 3 things I would like to improve.
  (1) I have to switch to the display of the trash, then on the file menu, select file > empty trash. I should be able to do this from any view.
  (2) the trash is not visibly withdrawn my trash review - I have to move the mouse up and down the display of the trash and then items visibly disappear.
  (3) I would like to be able to put a button in the toolbar to remove all the waste rather than having to go to the file menu.

  I've been using Thunderbird is probably 3 + years old and it has been very reliable, I think it's a good product. Updates work fine.
  Thank you

  Nigel

  I wish I could put a button in the toolbar to remove all the waste rather than having to go to the file menu.

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/empty-em/

• I find no "view orders" in the Mac App Store

  I find no "view orders" in the Mac App Store

  Hidden apps-

  http://support.Apple.com/kb/HT4928

  By the end of 2012 mini Mac, OS X El Capitan 10.11.5 beta 4.  Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 Air & iPhone 6 + iOS 9.3.2 beta 4.  Apple Airport Express

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.