Viewfinder does not external registration

Similar Questions

• USB not formatted; DVD player does not, external readers connect... something wrong, please help!

  Hello
  Desperately need help with my wife's cell phone.
  The dvd player will be noread disc. The drive is there in my computer but cannot read the content. I went to the pc with the problem world, they tried to attach an external hard drive, but it had the same problem, so they told me to restore to factory settings.
  I have a lot of photos I want down the comp before I restore (if that's what I do) but when I attach a USB key or an external hard drive via USB it said that they are not formatted, although they work on another pc.

  I want to save my photos but the difficulty of the laptop. Can someone tell me what I need to do?
  Help most appreciated.

  Thank you

  Stay away from PC World and other 'big box' stores. If you cannot do the following works yourself (and there is no shame in admitting this isn't your cup of tea), take the laptop to a local professional. Get recommendations from family, friends and colleagues.

  1. remove the hard drive and put it in a USB drive enclosure (or use an adapter) and attach it to a working computer. Then, copy your data.

  2. Once your data is safe, put the drive in the laptop and do a factory restore. If all goes well, after that, restore your data from the copy that you made. If everything is not well and/or the factory restore does not work yet, you have the hardware failure. What you do then much will depend on which components have failed and how old is the laptop; that is, it is worth spending anything to fix. MS - MVP - Elephant Boy computers - don't panic!

• write datalog does not accept registration

  Hello

  I'm using LabVIEW 9.0 and producer/consumer architecture to generate and send an order of series, and then write a timestamp and a Boolean value in a file of datalog.  The included snippet of code indicates a problem that I have with my consumer loop where the Datalog VI writing gives a broken link when it is connected to the Dequeue item VI.  Context-sensitive help says "You have connected to a polymorphic terminal that does not accept this type of data."  But when I booted the Datalog, I bind the queue at the terminal 'type record' of the Datalog VI open/create/replace.  Any suggestions?

  Thanks for any help,

  Mike Stebbins

  In your frame of initialization, you set the data type to go in the newspaper to be a reference to queue file.  You need to connect to the real data type which is the consolidation of timestamp and boolean, similar to that used for the queue.  That's why you get the error as part of read data.  You try to write a cluster in the datalog service when it began to be a given queue reference type.

  

• File PLPropertyLoader.ini does not options registration

  Hello

  With the help of TestSTand 4.2.0.

  When the tool to Import/Export properties is changed, and then the user presses 'DONE', two fields of the Export/Import Properties dialog box are not saved:

  (1) decimal point of

  (2) sequence

  Can they be saved in the PLPropertyLoader.ini file also?

  This problem spans 159809 of known cause (IE this issue only problem with sequence)

  Hi Chris,

  Thanks for the Bug 159809 updated.  I'm going to
  create a new bug for this issue report, our developers are aware
  of it, but you can really solve for your version of
  TestStand until a new version is available with the fix.  The source
  Code of the Loader property (and other components) is provided with
  TestStand, so we can modify the code and recompile (if you have
  access to a development CVI system).  Running the property Loader tool
  simply calls the existing GenericImportExport.seq file in the
  Directory of \Components\Tools.  In this sequence file.
  We see it just call a function from the TSDBComponents.dll which
  There are in the \Components\StepTypes\Database
  Directory.  Which calls the function DB_PLImportExportProperties
  PropertyLoader.c in the same directory as the DLL. The line of code
  Here we look at is 9703 line in my version (TestStand
  4.2.1), down from the PLLoadDefaultCtrlSettings function:

  If (!.) Ini_ItemExists (iniText, 'VARIOUS', 'DÉCIMAL')) / / added in v1.1, if playback option saved from 1.0, use a default value
     
  SetCtrlVal (propertyLoaderDialog-> sqlStatementPanelHandle,
  STATEMENT_DECIMAL, TS_DecimalPoint_UsePeriod);       fail silently
  in case of error
  on the other

  {
  errChk (Ini_GetInt (iniText, 'VARIOUS', 'DÉCIMAL', & value));
  SetCtrlVal (propertyLoaderDialog-> sqlStatementPanelHandle, STATEMENT_DECIMAL, value);       silently fail on error
  }

  This
  Code reads the file PLPropertyLoader.ini and load the DECIMAL
  entry into memory.  If we change the SetCtrlVal in another case to
  Assign the value (+ 1), the property loader works as expected.  I have
  This changed and recompiled the DLL and the property loader now
  preserves the decimal option correctly.

• Photo viewfinder does not cover screen

  Hello

  I am starting with a simple application Native camera directly from the developer's Web site and made a few small changes. I can't picture viewfinder to cover my entire screen on BB10. I'm sure that someone had the same problem before, but I couldn't find a link to it.

  Any help would be appreciated,

  Thank you

  It would be dependent on how you install your viewfinder and the surrounding QML.

• PK disabled but still does not allow registrations double

  Hello
  I am using TOAD.
  There is a table with PKconstraint. I disabled it and tries to insert a duplicate record.
  Its Unique key (name of the PK) violated error.
  
  I think that would not be appropriate to come once you have your off your constraint. Fix?

  Another possibility might be that you have created a unique indexes first and then the primary key. Check this

  create table t(no integer)
  /
  create unique index t_idx on t(no)
  /
  alter table t add constraint t_pk primary key(no)
  /
  select * from user_indexes where table_name = 'T'
  /
  select constraint_name, index_name from user_constraints where table_name = 'T'
  /
  alter table t drop constraint t_pk
  /
  select * from user_indexes where table_name = 'T'
  /
  select constraint_name, index_name from user_constraints where table_name = 'T'
  /
  

  If you run, you can see even after that you drop the primary key Unique index still exists.

• Camerademo does not work on the curve 8900

  I tried to integrate a camera in an application that runs only on the bold 9000 and 8900 curves.  My code based on this sequel to the KB article works absolutely fine on the "BOLD".

  How - to take a snapshot using the built-in camera to a BlackBerry smartphone
  Article number: DB-00667
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/1089414/How_To...

  However, it does not work on the Curve 8900.  Initially I had a problem with the viewfinder display only part of the image and then corrupt display, so I upgraded the operating system to v4.6.1.133 (the most recent available for Vodafone UK) and now the viewfinder does not at all appear.

  To make sure it wasn't just my request, I loaded camerademo, compiled with JDE 4.6.1 and signed, on the device.  Still, the field of the viewfinder is not displayed.  When I click on the 'Take Photo' button, I get a null pointer exception, because the bytes (_raw) on the screen of createImageScreen are null.

  camerademo works fine on the Simulator, but Interestingly on the Simulator, the maximum camera resolution is 1660 * 1200, where, as the real device is 2 K * 1. 5 k.

  So why camerademo does not work?  If I can fix it, I think I can fix my application.

  Edit to set "Write me" every person must answer.

  This problem is now solved with an upgrade to OS 4.6.1.199, 4.6.1.133 form.

  Even with this level, the screen of the camerademo CameraDemo, which contains the "viewfinder" needs to be changed so that no other fields are used - this includes the removal of the setTtitle.  With this fact, ButtonField is not added, so the fieldChanged() event is not raised, another way of taking the photo should be used.  In addition, I also changed the scale factor in the ImageScreen to 8 from 7, to make the thumbnail a bit smaller.

• Does not: enable reader to save the Document

  I'm having a problem that is mentioned in the first post on this thread in the knowledge base: http://help.Adobe.com/en_US/Acrobat/9.0/3D/WS58a04a822e3e50102bd615109794195ff-7e0d.w.html

  I have 8.0 Pro Acrobat and Acrobat Reader 8.0 installed, so I shouldn't be having this problem. After I activated the player save the document in the reader, and I test it in Reader 8.0, I get this message:
  
  Outgoing Message notification
  An e-mail message with "documentname.pdf" attached was given to your default e-mail application. If your e-mail application is set up to automatically send on a calendar, the email will be sent automatically b.
  
  If this isn't the case, you will need to send the message manually.
  
  But my default the (Outlook) email application opens an email. I checked the 'internet properties' for my browser and Outlook is set as the default mail app, so I don't know why it doesn't work. Help, please!

  As said by Graffiti, I try just to help you to get off a frustrating path. You can activate in full Acrobat Reader (if you designed the form in LiveCycle Designer, you may need to follow a slightly different path) in order to allow the full form will be saved. However, you can have the form (XML or FDF) data submitted and which does not require registration step. The problem with recording, is that you are limited to 500 uses by the EULA (looks that your form was a form of general purpose and you would probably exceed the limit).

  The submitted data can be imported to the shape and so you can easily have the same results for the full form with the data.

  The problem with the electronic submission is that it is dependent on the client machine, something you have no control over except if you are in a controlled environment and machines can be controlled accordingly. MAPI is the Windows interface that allows other programs to access e-mail. There are at least 2 versions of it and a lot of people do not activate it. Thus, those without active MAPI would flood you with complaints about it does not work. You are welcome to try to implement the instructions to tell people how to activate it, but that they would probably have something to tell you or just getting lost - a good way to lose business. If you do not need the data in the format, you can it be subject to the cgi-mail or formmail that may be on your server. In this case, you will need to have the data formatted in an HTML form (one of the options in Acrobat forms, not sure of Designer). Then the data would submit as on a web form to mail script. These scripts require hidden to know where to send mail, and other fields.

  What I meant is that it is unfortunate that the manual suggests e-mail when it is not a good method to use for the form submission. We address this question 3 or 4 times a week with people. There are several forum topics that relate to your question, all saying pretty much the same. Sorry if you don't like the answer, but this is how it is. Use the send e-mail if you want, but be prepared for complaints. At least you know why you'll get them. Apparently, some MAC users have similar problems with presentation of messaging. I have no idea about the users of UNIX in general. Looks like same you don't have things set up correctly on your email address and you expect that it works for other people? That's the problem!

• Satellite L50-B916 - recording external Microphone does not work

  Hello

  Connect an external microphone to * Headphone\Microphone combo socket *, still records through portable microphone instead of externally. Registration of external Microphone does not work.

  What Miss me? Please notify.

  Model: L50-B916
  Screenshot: http://s12.postimg.org/j8h3v5k4d/laptop.jpg

  I can't say with certainty what may be wrong here, but two things confuse me:
  -somehow your external MIC is obviously not detected because in the case when the external microphone is connected laptop switches automatically to it
  -I don't understand why there are two identical entries under recording devices.

  When I connect my headphone it is always a single entry (Conexant SmartAudio HD default unit), but my machine automatically goes to the external microphone only.

  Have you tested the feature with some applications like Skype?

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Siri does not find the files on my external drives

  Hiya:

  Just updated to Sierra of MacOS and I try to use Siri to search for files on my computer and as the title suggests, Siri spitting not files on my external drives (both connected via USB 3 on the back of the iMac). I tried to turn on Siri/off, Spotlight is not all excluded files, I tried signing in/out of my iCloud account. I tried to create a new user account on my Mac (which will not find anything). Permissions on my external hard drive seem ok: read/write is enabled for me, all the world and admin; "ignore permissions" is turned on.

  I'm starting to think that this is a design limitation of the software. Someone else using Siri able to search for files on your external hard drives?

  As near as I can tell, unlike the Finder and Spotlight, search Siri does not check for external drives.

• Drive external hard Mac has shown in the past but does not now show in disk utility. How can I get it back?

  I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.

  I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.

  I hope someone can help.

  Hi willy of San Jacinto.

  I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.

  Read this article on troubleshooting USB devices:

  OS X El Capitan: If a USB device does not work

  If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.

  Thank you for using communities of Apple Support, cheers!

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.