VIMA (Virtual Infrastructure Management Assistant) - cannot add DNS nameservers to the VM management

Similar Questions

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  ===============================
  If a music file Movie Maker crashes
  in a format that is not compatible. If you convert
  the file to the format of .wma before importing, you
  can have a better result.

  The converter below might be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your audio clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "You cannot add this location to the gallery.

  Windows Photo Gallery doesn't let me add pictures to the gallery. All images are currently in the folder 'Picture' and are 95% of the .jpg files, some are .pspimage files (Paint Shop Pro) the exact wording is: "You cannot add this location to the Gallery" this folder or one of its parent folders is considered a system folder or is considered as a system folder or marked as hidden. Its recommended that you move your pictures in the pictures folder or to a different folder.

  And can you tell me the difference between the Windows Gallery and Windows Live Gallery? (Incidentally, my photos appear in the Gallery Live.)

  Windows Photo Gallery doesn't let me add pictures to the gallery. All images are currently in the folder 'Picture' and are 95% of the .jpg files, some are .pspimage files (Paint Shop Pro) the exact wording is: "You cannot add this location to the Gallery" this folder or one of its parent folders is considered a system folder or is considered as a system folder or marked as hidden. Its recommended that you move your pictures in the pictures folder or to a different folder.

  And can you tell me the difference between the Windows Gallery and Windows Live Gallery? (Incidentally, my photos appear in the Gallery Live.)

  ========================================
  Windows Live Photo Gallery is an improved version of the
  Windows Photo Gallery... you just use one or the other.

  Photo Gallery Windows comes with the operating system... Windows Live
  Photo Gallery must be downloaded and installed.

  Take a look at the following link:

  Windows Vista-
  Windows FAQ Photo Gallery
  http://blogs.msdn.com/PIX/pages/FAQ.aspx

  (Library vs Live Photo Gallery)

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Cannot add USB controller to the virtual computer

  We are trying to add a USB port to a virtual machine under ESXi 4 (free) material: it gives us the opportunity, said it can be added to this virtual machine, shows, she added to the list, but when I click on 'ok' final we get this error in a pop-up (Word for Word):

  "There are not enough licenses to complete this operation.
  ' Hotplug not approved, required function have need.

  Yes, that's exactly how the second line reads.

  In ESXi 4, you must completely shut down the virtual machine before you can add the USB controller. It's a change of 3.5, enabling you to 'hotplug' material while the machine was still running.

  In addition, you will probably be able to connect a USB device to a virtual machine. I have yet to find someone who has got this to work with the free license and no additional software. There are USB for IP devices that have been suggested for use with ESXi. If someone got the USB transfer to work on a box of vanilla ESXi, pleas ëlet me know. It would be quite beneficial.

• Cannot add a host with the host name in VC

  Hi all

  Nice day.

  I just finished the installation of 2 servers esx4.0, Vartual Center Server and domain controller server in my home test harness. I added both the host esx server in DNS records. then I tried to add hosts to VC by using the host name, then I get the error message like

  "Unable to contact the (xxxxx) host specified. "the host may not be available on the network, a network cofiguraion problem can exhist or that management on this host services may not respond.

  I checked that all are ping and found no network configuration problem. I am able to add a host using the IP address, but not with the host name. I checked services in VC, all services run very well. Earlier I never had this problem.

  Please help me if someone has the solution.

  Thanks in advance

  Kind regards

  Suresh

  I would check the article below under additional information

  http://KB.VMware.com/kb/1027672

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Cannot add or subtract from the choice of backup discs

  I can't find how to add or subtract from the disks to use for storing upOne of my disks (3) is complete and I want to use new selecta. the preferences window is not resized

  IN aid, he said:
  «If you already set up Time Machine, your backup disks are listed, and information on each disc of the backup is displayed.» To select, add, or remove backup disks, click Select Disk or add or remove the backup disc. »

  I don't see this option in preferences:

  

  

  Simon,

  Scroll down in the window pane to display the add/remove disk backup option:

  

  

• Cannot add a folder to the list of shared folders

  I am in the Prefs system - Sharing - sharing files and when I click on "Add" and choose a folder in my user profile, as 'Documents', and click 'Add', nothing happens.  The file is not added to the list.

  Any ideas?

  I forgot to add, it's El Capitan v10.11.1

• Officejet OfficeJet 4620: 4620 - cannot add a device on the Chromebook

  When you install this printer, I have printed out all the test sheets provides the printer and everything is a 'pass' and connected. I try to print from my HP Chromebook but can't add a device. The application code, I got the printer indicates it is expired. I'm stuck. Suggestions?

  Hello

  Please download the HP print for chrome extension and follow the Installer instructions here to see if that helps.

• Cannot add code snippets to the triggers Panel

  Hi all, I'm on Edge animate 20141 CC and I'm unable to add code snippets in the triggers Panel. When I click on buttons, such as "Replay", the code appears in the Panel, but varied. I hit the return, but no change. Anyone would be able to tell me what I do wrong? Thank you for your suggestions. I'm on a MacBook Pro (late 2010) running Mac OS X 10.8.5

  Nevermind, I got it. For some reason, he wasn't adding the target to the code when I chose it, but it is now. Don't know what that I was different, but it works now.

• Cannot add layer markers on the fly with Mac laptop

  I tried to figure this out for hours now! I'm on a Mac laptop Intel Core 2 Duo running 10.5.6. I use After Effects CS3 Professional. All I want to do is RAM preview audio file from within a composition and Add layer markers on the fly. Apparently, it's easy with your desktop using the keypad. I remapped the shortcut in the preferences text file so that "Add a reference" is now F12 - nice and easy! (and no, this is not in conflict with the dashboard OS shortcut - I disabled that). Anyway, I tried a number of other institutions. The problem is, no matter that the shortcut, when I try to add the guide layer with the shortcut, the file stops playing! So annoying! I want to add a number of landmarks of layer timed to the rhythm, but whenever I do damned RAM Preview stops! I can't mark important points in the composition! Any help would be appreciated...

  -Bryan

  People have used cobblestones digital external (not full keyboards) to work around this problem with the new MacBook Pro keyboards. There is even an iPhone app that turns your iPhone into an external numeric keypad.

• Cannot add firepower ASA to the Management Center

  Hello

  I'm setting up a asa 5515 x with firepower now services, I wanted to add to Manager unfortunately I updated the sfr to 6.0.1 module but I installed management center version 6.0.0 vm. now I have to upgrade to 6.0.1, but I can't find the package of appropriate for this update. In fact, I found a few packages to these addresses:

  https://software.Cisco.com/download/release.html?mdfid=286271171&flowid=...

  https://software.Cisco.com/download/release.html?mdfid=286261232&flowid=...

  but it does not meet the software update and the same or similar messages in the console:

  No valid device available for Sourcefire Defense Center S3 Hotfix K 6.0.0.2 3D - 3

  This update is intended for higher versions of software or 6.0.0.1 and less equal 6.0.0.2 - 3

  Can someone help me through this? I use the vm wrong? or do I have to install the iso one from scratch?

  Upgrade your Management Center fire power using the file "Sourcefire_3D_Defense_Center_S3_Upgrade - 6.0.1 - 1214.sh.

  You would first download this file cisco.com to your PC, then load it on CMF.

• Managed to install XP Mode but cannot find "Windows XP Mode" in the folder "Windows Virtual PC" and also cannot find any file with the extension of the vmc

  Dear friends,

  I'm using Windows 7 Ultimate 64 bit

  I'm really happy with the answers given on this subject, but after the installation of "WindowsXPMode_en - us.exe" and "Windows6. 1 - KB958559 - x 64 - RefreshPkg.msu ".
  installation went well but I can't find any file on my computer with vpc extension, and I don't see the Windows XP Mode folder in Program Files.
  When I try to reinstall, I get the message that it has already been installed.  In folder options, I enabled see all files including system files.
  Thank you!

  Thank you very much!!!

  After I posted the question (and struggled with the issue for a while),
  I decided to uninstall Virtual PC and XP Mode, and then when I reinstalled
  them everything was fine.
  In any case thanks for the elaborate and useful response which I'm sure
  others will benefit from it.