Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

Similar Questions

• Cannot move the object

  Hello

  I scanned a drawing that I place on it's own layer from the office, he was directly drawn, expanded and consolidated.

  When I select to move it, either using the arrow keys or the transformation/move command, I get a message that I've ever seen before "cannot move the objects. "The requested transformation would make some objects fall completely the drawing area.

  Could someone explain what it means?

  Thanks for any advice.

  Occurs usually when you have a wandering point or a selected guide. Zoom out all the way. You have something that is going to the grey area (outside the mount table) completely.

• Help, please. New CS 4 error: cannot move the objects. the requested transformation would make some objects fall completely the drawing area.

  I know that this is not a 'new' error message, but I never got on the previous versions of Illustrator. I just upgraded to CS 4 and get it now on almost all files when I try to move an object in any direction. Not that it matters, but these are files that were created in previous versions of Illustrator and I never had this problem. I followed the instructions of similar positions without success. I zoomed way toward the edge of the art Council: there is no hidden layers, objects or guidelines, no persistent points of the guidelines are erased, or objects of any kind anywhere near the edge of the box art (which, I know it, is huge compared to the size of my working paper of 11 x 17)

  What Miss me?

  In addition, on occasion, when I CAN move an object (usually a JPG or PDF image that I placed in the document), the image disappears. I think it is always 'there' even if I'm not. Any suggestions?

  Is it possible that your keyboard Increments area struck a giant number? Check under general preferences. (removal of preferences would also reset it)

  Also, to double check - when you zoom in completely to where you can see the limits of the editing table (so you're zoomed out to like 5% or something like that) UNlock all United Nationshide all and select all, is your framework of selection within your page?

• CS6 - cannot move the object to new layer via dot

  I can't drag a selected object to another layer via the point of color in the palette layers to the CS6.

  

  I've been doing that since I can remember. Is it some new CS6 default setting I'm missing?

  You must turn off 'show layers only' in the range of panels.

  I had the same problem.

• Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message

  Cannot move the element 'name.extension"in the Trash because it cannot be deleted. I restarted the finder and still got the same message. little help?

  Why do you want to delete?

  Where is located? (This file)

  What is it?

• Cannot move the files to the trash - just keeps turning

  Original title: trash

  I cannot move the files to my trash - just keeps turning... but does not connect. Have tried empty, but said: "to have 0 in the trash.

  Hey golfer Mi,.

  1. what type of files you delete?

  2. were you able to move the files to the trash before without any problem?

  3. did you of recent changes to the computer?

  Step 1:

  You can try the following steps and check if it helps.

  You can try to drag a file it and check if it appears in the Recycle Bin

  a. right click on the Recycle Bin and select Properties.

  b. disable the option "do not move files to the Recycle Bin. Delete file immediately when it is deleted. "and check.

  Step 2:

  You can also try to create a new user account and check the issue.

  Create a user account

  Hope this information is useful.

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• Problems to install Lightroom "ERROR: DF024: cannot move the file", etc..

  When I try to install Lightroom CC I get an error message "Encounter errors during installation (7)", followed by "ERROR: DF024: cannot move the file in" C:\Program Files (x 86) \Common Files\Adobe\Installers\adobeTemp\...".etc.»» He then told me that the file is used by another program, but nothing else is open.

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  [Edited the title to improve clarity - Moderator]

  I saw another thread on a similar problem. He says to disable anti-virus software and that worked perfectly.

• Cannot move the CTI after effect cs6

  Hello everyone. I left Cs3 and now have cs6 and I can't move the current-time indicator in after effect cs6. What I am doing wrong? For example. If I type a word in the model and then go down to the 'position' and create keyframes and try to move the current time indicator, it does not move. I feel that something is blocked and I do not know what caused the indicator does not move.

  Any help would be greatly appreciated.

  
  

  
  

  Thank you

  Jical

  Your model is LONG of TWO EXECUTIVES.  Make it longer and you can move the slider of the timeline.

• Cannot move the anchor points using the Subselection tool? (CS5)

  Hey.
  I experienced an intermittent problem in Flash CS5, where sometimes I can't push anything using the Subselection tool. Sometimes, I can, but most of the time I can't and I don't know why.

  I can still click-and - drag points (or multiple points/paths), but I can't push the keyboard.

  Any ideas?

  My guess is that the item is grouped and you are inside the publishing group? For some reason any in this case you cannot move the points in this way.

  Separate the Group and try again. Sorry that's the only answer I know.

• Cannot move the nhs mail in the trash more mammals

  Use mail nhs voicemail for years. In recent weeks impossible to delete the mail I receive

  the error message that it cannot move the message to the trash. Works great on iMac, but not on the Macbook.

  El Captain running on both systems. Can anyone help?

  Thank you

  Have you tried CTRL/click on the mail... then choose 'delete '.

• I have a partitioned drive and you need to move the updates of the E: drive, how can I do? ___

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I a partitioned drive and you need to move the updates of the E: drive, how can I do?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You do not have.

  The updates will install on the drive where Windows resides.
  TaurArian [MVP] 2005-2010 - Update Services

• When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  When I try to send an e-mail, a window appears and says that cannot find the pop3 host. What I have to change if I send an e-mail?

  1. What email program are you using?
  2. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• Ran repair and now recovery cannot find the OS to fix it.

  Damaged operating system.  Ran repair and now recovery cannot find the OS to fix it.  When I try the installation option, I get an error message that it can't find install.wim.  Operating system has been installed on a HP Pavilion a6600f and I have the product key, just not Vista 64 bit to enable more.

  * original title - corrupt OS. Ran repair and now recovery cannot find the OS to fix it. When I try the option to install I get an error message that it cannot locate install.wim*

  Hi agc409,

  Please see the following HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=IE&DocName=c00881405

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update