Virtual Lan wireless controller very few questions

Similar Questions

• Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

  Hello

  We have several AP 521 in our headquarters main building as well as our remote branches, totalling about 16 AP, four in our main headquarters office and one in each brachh distance.    All AP at this moment are stand-alone devices.

  We are contemplating centralized management of ALL our AP devices implementing this controller 526, where we can handle easy to access list of mac or other parameters.

  Here are my questions based on reading some documents based on 526 controllers:

  1. I undersland these models AP and 526 controller model are EOL, - what are these end of Support - at this time we are not planing to migrate to the new AP devices yet, maybe in 2-3 years on the road, but definatetly SmartNET is a must on these.

  2. for 526 be able to handle any device of AP, is the peripheral access point must be converted on KNEES, is that correct?

  3. as I read, 526 controller can support up to 6 devices AP 521, if this is the case for example... I can say install a 526 to the main AC controller which has only FOUR peripheral wireless AP and be able to manage also the 2 more devices AP of REMOTE offices that are not directly connected to main office switches HQ but to have connectivity that are across our links WAN MPLS or (wireless AP) should be directly connected to the LAN so that the 526 be able to manage devices, if possible, then that would allow me to implement 3 526 controllers in the HQ Office to handle all 16 devices AP of our entire company... Please correct me if that's not true.

  4. and finally, for example, say I have MAC ACL applied to each AP devices, now with the 526 controller if we go about using centralized management would be that I could create a MAC acl and indicate to the Scheduler to propagate the ACL to the devices all THE AP which are under its management?

  Thank you for your help

  Concerning

  1. This is the end of life announcement:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/end_of_life_c51-568040.html

  2. Yes, LWAPP APs are easier to manage from the 526:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/product_data_sheet0900aecd8060c22b.html

  3. you will be well on MPLS for AP to join a remote control. You may need to change the MTU if you have problems with the junction of AP.

  However, remember that if you are MPLS connection goes down, you lose connectivity, so it is a design decision to make.

  4. in the list of features, you should be able to:

  http://www.Cisco.com/en/us/docs/wireless/controller/526/1.5/configuration/guide/A3_feature_list.html

• 2504 versus 3850 wireless controller

  We are just beginning to look at wireless on our secure networks. We have a 2504 and some WAP 36xx but never installed. We also ordered a couple of 38xx WAP and group the 3850 templates which included the wireless controller. We plan use our Cisco ACS with CERT and AD for authentication.

  We're finally going wireless at several sites of fiber attached if cela pans.

  To save time by going down the wrong path, I have some basic questions to ask.

  My questions are... what (2504 versus 3850 WC) approach is better?   I know the 3850 series may have mulitgibit connections to WAP with the newest 3850 model x, which can be a more thereafter. I also don't know the process of how data is placed the user wireless via the WAP to the local network. Data must tunnel through a tunnel of IPSEC for the 2504 and then placed on the local network to the location of 2504?  Or is this just tunnel for authentication and wired LAN between WAP and switch allows direct data flow?   We have a few wireless on our network, but we use a totally different method.

  What bothers me is that if there is a certain wireless access to a corporate network and servers I think 1 GB for the WAP connection could be a bootleneck... esp if the data can not be placed right on the local network to the WAP connection to the switch.

  A 3850W model controls the only devices on the local stack or it may go beyond this restriction too? I mean, it's can support 3850W THAT connected to another WAP stack too?

  I would not use the 3850 unless your environment is weak, that being said, the 3850 and the AP must be on 3850 or 3650 in your environment. I'd go with the 2504 his stable and you will not regret it :)

  -Scott

  Please evaluate the useful messages *.

• IDEAPAD S12 NVIDIA ION with windows 7 - a few questions

  Hello

  I had a few questions about the ideapad s12 sold with windows 7

  -It is in europe? (I know it's for sale on the official website of lenovo, but I think that it only contains the American market)

  -could I buy one on the official site? (I live in Turkey and I wonder if lenovo WD ship the s12 in Turkey)

  -need a built-in 3g modem? (this is about the most important I want to know about this netbook)

  -What is the ram limit? (it comes with 2 GB of ram, what can I bring? (2 GB of ram more ex?)

  -What is the scope wireless internet?

  I WD be very happy if I cd get answers to some of these questions. You all, have a nice day

  Hi and welcome to lenovo forum...

  First of all know this S12 ION Version soon in Germany will...

  comes with 2 GB of memory and hard drive of 250 GB and Windows 7...

  No there is no WWAN / 3G... But could be released in future versions...

  Wireless standard is 54 MB (free field, 50 m - 100 m), there is no "300 MB n' expected Version...

  Memory 2 GB... dunno possiblitys update... but 2 GB is enough for 99% of cases...

  hope you help a little further

  cordially KalvinKlein

• GAL/LACP with several VIRTUAL LANs

  Hello

  I have two switches SG-200-50. I created three VLANS on one and define the place of the other - there is no requirement for routing between VIRTUAL LANs. However, I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. I seemed to be able to get 1 VLAN, the default, trunking but no VLAN 2.

  I have a few questions:

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  See you soon! Any thoughts appreciated.

  Scott

  Hi Scott,.

  You had questions, which I copied in red. :

  1. the SG-200 will allow you to the trunk several VIRTUAL LANs for another switch?  Absolutely

  2. If so - how? I've lived the documentation and it does not mention explicitly "multiple" VLAN with DELAY.

  I have attached the Administrator's guide.  The OFFSET rules are defined at the bottom of page 82 of the attached document.

  The 200 series supports four lags, or in other words four groups aggregagted of links.

  3 circuits is possible by a LAG (say 6 ports) happening all the VLANS on the switch?  Yes as indicates it page 83 administrator guide.

  Assign up to eight ports active members to the static LAG.

  So the main question is that I want to achieve is possible on this switch. The reason why I'm doing it is of course of redundancy. Carrying one VLAN on both switches is preferable. I just need trunk correctly between them.

  Personally, I prefer to the trunk on gal differently, especially when you are trying only to achieve redundancy and higher aggregate bandwidth between switches.  It is also relevant to the 300 series as the product of the 300 series is just a richer product.

  You want; "I want to trunk between local networks VIRTUAL using with LACP LAG. For example, A button 1-22 ports VLAN 1 and then 23-24 is the junction for this. 25-34 is VLAN2 and trunking is 35-36. VLAN 3 is 37-48 and 49-50 trunking. It seemed to me be able to obtain VLAN 1, the default value, trunking but no VLAN 2. »

  What about using the ports numbers higher for the uplink between switches, I have no particular reason to use these ports except that they are on the right side of the switch.

  A B switch

  ports ports

  VLAN 1 1-24, 47-48 1-24, 47-48

  VLAN2 25-34, 25-34

  vlan3 35-46 35-46

  LAG ports 49-50 49-50

  The advantage of this is that now you have two ports of the traffic load balancing between switches of series two 200.  I could have more if I want, but I want to keep my simple example.

  Create a static OFFSET, by the sound of it you did already.

  I just used my 300 series switch (SF300 - 48P) as a demo, as I don't have a series 200 switch.  Configuration should be roughly about the same.  In my case, I have four ports GiG GE1 to GE4.  I will use GE1 and GE2 as my two members of a group LAG 1.  May sound a bit confusing, but follow below.

  Added two ports for the DELAY, note in the example below GE1 and GE2 are not connected to another switch, so they showup as ports of Eve;

  Also my 300 series switch supports eight groups of LAG, so captures the numbers 1 to 8 as shown in the following screen.

  

  Now that my LAG is created, you'll notice in the screenshot below that VLAN1 is added automatically to the LAG 1 as unmarked frames.

  Note: circled point, I selected LAG in this menu drop-down and then click Go.

  Note: 1 in the Red rectangular box represents GAL Group 1, which consists of GE1 and GE2

  

  Now, I add 2 VLAN group LAG 1 by selecting 2 VLAN selected then LAG and then click go, the following screen came.

  

  I clicked on the button marked radio in the rectangle above, to allow VLAN 2 send labeled on group GAL 1 ethernet frames.

  And so on for the other VLANS I migth.

  My methodology or train of thought, was to allow of vlan1 to just send frames unmarked on the Group LAG 1, but any other VLAN later is marked on the Group 1 GAL.

  You should be able to do exactly the same thing on the other switch 200 series.

  in my example, as I then simply take some CAT6 or CAT5e cables and connect GE1 on a 200 series switch to other Ge1 200 series

  I connect then GE2 on a 200 series switch to other Ge2 200 series.

  Now I have the aggregation of links and balancing working between switches.

  Hope this helps

  Best regards, Dave

• for windows Xbox 360 Wireless Controller

  I tried to find an answer to my question on the wireless controller, I bought today. I searched for more than three hours. Anyway, I am not sure if the controller is connected or not. All by checking the Device Manager, it says that the drive controller works properly. However, I don't see any way of setting properties, the device on my desk and or connection to my games, now, I tried to use the controller for Age of Empires. And nothing happens. I use Win 7 32 bit. I've uninstalled and reinstalled the drivers, both the disk, or download it. Nothing seems to work. I also tried to download directions to the controller, but it only downloads the PDF in Chinese. Even though I listed English. I wish we could get answers to such problems without all the hassle. I was told before the purchase of this controller, it would work very well and I could used to play my games on my computer. But it's not working. My next step is to send it back. And go back to using my mouse to play games.

  Usually games that use keyboards to play should support xbox controller, such as the one that you drive a car, fighting, games, etc.

  A good place to start is:

  http://marketplace.Xbox.com/en-us/PC

  Download some free or demo games such as Microsoft Fly and try to see if you can set it with your controller.

• A few questions of the benchmarking Guide.

  Hi people,

  I now use ESX 5.1

  I have a few questions about the VMmark test!

  1.

  Disk space for VM is important?

  Because I found the client model.

  Space is limited, after that I installed the cygwin

  I use Windows 2008, the default 32 GB is not enough

  Same thing happened the day before VM

  The default space is not enough after Windows Update

  2.

  When we asked him to specify the size of the virtual disk and provisioning policy, enter either 15 GB (for you will be

  using Windows Server 2003) or 32 GB (because you are using Windows Server 2008), let the floppy

  Uncontrolled Provisioningoptions

  For this configuration to disk, I have to choose one of the three methods, I can't uncheckd

  Only that I should check?

  

  Is there any document with pictures of installation to follow?

  Thank you very much...

  Alvin

  The script automatically uncomment all lines, as for example the kern.srv.cleanup_threads, cygserver.conf values 2.

  In the files that you have shown, the values were already décommentés so there is no change. Your cygserver.conf is correct.

• Photos - a few questions

  Hello
  I'm quite new to the apple world, and I have a few questions about how to manage my photos. I looked for answers in different positions, but I couldn't find it.
  I hope you can help with the link direct answes.

  I have a macbook air 10.11.5 and and an iphone 6, here are the main points where I have my doubts:
  -J' enabled the icloud library, is it possible to choose certain albums that are still on the phone and everything else on icloud?
  -J' like the album moments, but sometimes the timestamp is wrong (as it is set incorrectly in the devices, like a relfex), is it possible to change it so that the order of the photo is good?
  -Photo can manage the raw file? If this isn't the case, you have an application for mac that you advice so that it works with icloud as well?

  Thanks to you all!

  1 iCloud library functions by doing everything in Photos available on all your devices and synchronize all your actions in any of all the vices d (including deletions). To save the storage space on an iDevice, set to keep an optimized local library. When short of space, pictures will reduce the resolution of the images stored locally, but upload photos high resolution for editing or viewing, including newer and more accessible images (i.e., the albums you use).

  2. you can change label information by right-clicking on an image and selecting window read the information to appear. Specifically for the time stamp, select Image > setting the Date and time of the main menu.

  3. Yes, raw files are supported, but please check your specific camera in favor.

  Photos user / help guide

  https://help.Apple.com/photos/Mac/1.0/?lang=en

  IVous has a very detailed and well illustrated article on iCloud photo library:

  http://www.IMore.com/how-use-icloud-photo-library-ultimate-guide

• Photos iPhone app using more than 5 GB of space with very few photos

  Hi all.

  I decided to get the Apple forums for help regarding a problem that my mother is with her iPhone 6, iOS 9. (I think she just recently updated to the latest iOS operating system 9 as well.)

  When my mother going into settings > use (or whatever he says now with iOS 9.0) > manage storage, it shows his Photos and the camera are well more than 5 GB, although it has only 100 or so photos in the camera roll. Recently deleted folder is empty, everything has been removed from it.

  Now, I had the same problem just now, where I had very few photos but I apparently got 3GBs is photo taking my storage space. I looked online and found that the problem could be the photos to try to load it on the library to iCloud? I don't use this feature, but someone had recommended to go into settings > iCloud > Photos > click on iCloud photo library and then turn it off. Miraculously for me that works to get rid of 2 + space GB of Photos & camera on my iPhone. It is as if it were an invisible compensation cache of photos or something.

  I attempted to try this technique of "turn on the library to iCloud and then clear it" even on my mother's phone, but every time I clicked on, she says there is not enough space storage iCloud. She has a limit of 5 GB, but has about 5.9 GB of photos apparently cached somewhere.

  Finally, my question is, is there a way to delete this absurd amount of space which is be resumed without the need to restore to factory settings?

  Any input would be greatly appreciated! Thank you!!

  Make sure you first what iCloud p. l. is off his phone. Then try to reset the Photos App close pictures completely from the window of the selector app by double clicking the Home button and slide up the photo preview pane until it disappears from the display. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  If this is not enough, you may need to do a restore. You can do a restore of backup first and not come back again or factory. It is possible that the backup can be damaged, and if so a restore as new would be your next option but try to restore everything first from a backup.

  https://support.Apple.com/en-us/HT201252

  I hope that the steps described in the first paragraph will take care of him.

• HP 15-r014TX: I can't install the driver LAN wireless on my laptop.

  When I install its message showing installation has completed. But when I search it on my network as well as on programs and features connections its does not appear. So I can't use wifi on my system. There are two LAN wireless driver on the HP website for my system and problem remains at the same time.

  Hi @GOGO46,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. I came across your post and wanted to help.

  Here are a few steps to identify the cause of the failure, or you get a permanent solution:

  • Perform a default bios.
  • Please run the diagnosis of Wi - Fi on your computer.
  • Steps to do: hold button power for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press the F2 key repeatedly, once every second about.
  • The main menu of hardware for the HP (UEFI) PC Diagnostics is displayed.
  • Select pane control and run the wireless diagnostics.
  • Please check all electromagnetic disturbances in the area. (Such as the microwave ovens, GBA and mobile phones)
  • Make sure that the proximity of the laptop with your router.
  • Please disable the Bluetooth driver in Device Manager and check.
  • Please check in SafeMode with network.
  • You can also create a new user account to check to further isolate the issue.
  • If the wireless card is insensitive or not detected in diagnostic tests, or if the problem persists after trying these steps then the Wi - Fi card is defective and must be replaced.

  For more details please go through the support document for troubleshooting wireless network and Internet (Windows 10)

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

  Kind regards

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• A few questions about G10

  Hello, just bought the qosmio g10.

  Here are my horses/questions

  1. the sound during DVD playback is not getting a lot. Can't handle the bass too well. low voice is hard to hear. is there a good setting for this in the virtual surround from toshiba. currently have srs at 80% level, size speakers 250 Hz, trubass level at 10% and the level of discussion to 70%. I modified the default trubass 80% because the dialogue of the film was unhearable to 80%. It's much better now, but I think it could be better. advice on this setting or other settings, are highly appreciated. I don't think it's HW, since the evolution of the sound settings were much better.

  2 region unzoning. Not sure if this is a good place to ask this question, but does anyone have any advice? We can personally discuss commercial e-mail.

  3. quality of the image for the DVD and tv. The picture quality is as good as a tube tv or is it normal that when you watch DVDs, the picture quality is a bit weak? I can understand for tv on MCE that the image is not great due to the reception of cable quality. Although it's not great.

  4. I can't get my infra red to work. It is available on the g10? should be customized to have infra-red on laptops now. You have to light it some how. Where? P.S. not MCE infra-red, which works very well.

  Sorry for the long post, but any tips are appreciated. Cheers.

  Hello

  1. I am also owner of laptop Qosmio G10, and in my opinion small Harman/kardon speakers are great. I tested the sound quality with different kind of music, watching DVDs and listening to the radio on the internet. So far, I have no complaints. Toshiba virtual sound tool is very good and allow the user to define the individual taste of sound quality.

  I noticed that all the options have a strong influence on the sound quality and it is possible to set the quality sound for each type of music.

  My configuration is:
  Size of the speaker 200 Hz
  TruBass level 75%
  UPDATE level 76%

  2. as you know you can change the region 5 times code and the last of them will be by default and cannot be changed

  3. I agree with you that the quality of the image depends on the quality of cable reception. DVD playback quality is excellent. In my case the TV, picture quality is not so good but good enough

  4. If you want to say about the IrDA port, then I have some bad news. IrDA is not available for this device. If there is no entry in the Device Manager the unit has no IrDA. I checked the manuals of s, and I found no info that should be infrared on this machine.

  Good luck with your new toy!

• A few questions from a new owner Toshiba NB200

  Hello
  before 3 days I have buyed a Toshiba NB200 h-13 with Windows XP Home Edition. I want to upgrade to Windows 7 and I have a few questions.

  1) Will Windows 7 run good with Atom N270 1.6 Ghz 1 GB ram and Intel GMA 950 or must I go to 2 GB of ram;

  (2) can I save HARD drive recovery.

  Thanks for your help

  I've been running Windows 7 on my NB205 since the RC, yes it works very well and the drivers are available. I would upgrade to 2 GB of RAM...

  During installation, do not remove the recovery Partition and allows you to return...

  Jeff

• A few questions before you buy the Toshiba Qosmio G40 - 12J

  Hello

  I would buy a Toshiba Qosmio G40 - 12J and I have a few questions:

  -There's a Bios / disk HARD Tatoo that block the other installation of the system?
  -Is an original supplied Vista DVD Installation or reinstallation is made with a hidden partition on the hard drive?
  -If a Master Installation of the Vista DVD is provided, is an additional driver / software cd also delivered?
  -I can delete partitions and recreate them as I want, or is there a problem (because of a Bios / HARD tato or hidden partition HDD disk)?

  Thanks for your answers,

  Good day!

  lightchpa

  My dear, I had a G40-108 and now I work very well with G45-AV690.
  You can install XP... Linux and so forth, but don't forget to find the right driver (Nvidia and so on...)
  The recovery DVD is not only the Vista operating system, but there is the operating system with all software and tool too.
  You can create and delete any partition you want to

• Re: A few questions about the Satellite L300 - 145 (PSLB0E)

  Hello

  I have a few questions that make me go nuts.

  1 - this laptop what chipset is actually uses? GL960 and GM965? Since it has 2 GB max ram I would say GL960, but that one is capped at 533 mhz and 667 mhz are the Rams came with the laptop. Also the name of drivers chipset gm965, said, I don't know if it's the name for the entire group of chipsets or if it's really a GM965. And also GL960 has no integrated graphics, but this laptop only, and GM965 has an integrated graphics card.
  to prove that I do things to the top you go here:
  [https://ark.intel.com/products/29830 | https://ark.intel.com/products/29830] GL960
  [https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller | https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller] GM965

  2 - if it's a GM965 why the computer only suports laptop 2 GB ram max, while officially the suports 4 GB chipset?

  3 - Why is there not a page on the website of toshiba (al less in the Web site code) which tells me the full specifications for this laptop, as if there is a page for others more recommended laptops?

  Post edited by: Kailido

  Your phone has Mobile Intel GL960 Express Chipset inside and can handle with 2 GB of RAM only and you can use the monitoring modules:
  1 GB-DDR2-667-PA3512U-1M1G
  2 GB DDR2-667-PA3513U-1M2G

  Unfortunately I can't answer your last question. This question is for Toshiba directly.