Virtual machine appears a CPU in the system while it is assigned two

Similar Questions

• What brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  People,

  Hello. I use 3 Player VM and Guest OS Windows Server 2003. The host OS is Windows 7. I need to increase the size of the VM disk, so who can install several systems in the guest OS. Before you increase the size of the virtual disk, I need to back up the virtual machine hard disk external. It is to copy and paste the "C:\VirtualMachine\" folder in the hard disk external.

  I just bought an external hard drive that is "Western Digital My Passport Essential 500 GB USB 3.0" and its software is "WD SmartWare". It seems that the software can back up the entire hard drive only. Alternatively, the backup files by selecting the types (music, photo, document, movies). But can not save a folder "C:\VirtualMachine\".

  So my question is: what brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  These two questions do not apply if you have a virtual machine.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• cannot not power off the virtual machine, but don't think the host it is running!

  I have two clusters VI3. An older cluster to 3.02 hosts and a new cluster with ESXi hosts. Level of current patch on ESXi hosts. New guests and old presenters sees the same storage, but I have additional storage which can see only the new virtual machine.

  Most of the migration to the new cluster went very well. A few questions. But a VM just GIVES me fits.

  After the failure of attempts to migrate the virtual machine to the new storage, I thought I just migrate the virtual machine to the new host and leave it on the old storage, for now, until we could find something later. VCenter events logs show that the migration has expired. However, the virtual machine appears in the new cluster and is no longer in the old cluster. Also, he turned on itself for some reason any. Turn off in Vcenter gives the error "the operation failed because another task is underway." Having the VM that I could put it off in before Vcenter, and no no unsure of how to use the RCLI for this, I have connected to the host directly mode "not supported" and has run vm-support - x to get the list of running virtual machines and their ID's so that I could kill him. However, the host does not include this virtual machine in the list of virtual machines. So I think a virtual computer that runs Virtual Center, but he thinks the host it runs on is unclear if I can't kill the process.

  Help?

  Have you tried to restart ESXi management officers, as well as the vc service is restarted?

  -KjB

• the virtual machine monitor driver required by the virtual machine is missing

  Hello
  After you install virtual pc xp2 and when I run this program I got this messege (the virtual machine monitor driver required by the virtual machine is missing)
  What is the answer

  Hi jameelaswad,

  The question you have posted is better suited in the forums of Virtual PC. Please see the following link for more information.

  Windows Virtual PC / Windows XP Mode Forum

• Can't export virtual machines: unable to connect to the remote server

  Hello

  I'm working on vSphere client 5.1 (vCenter Server 5.1). Trying to export a virtual machine for distribution model. When I go to file-> export the template OVF..., I get the following error message:

  Can't export virtual machines: unable to connect to the remote server

  Remote not sure what/who he is not able to connect to. If I connect vSphere Web Client and navigate to the same model (or all other models), under 'All the Actions of vCenter' I don't have an option to export to the model of the FVO. But if I use a VM machine instead of a virtual machine template, I have the ability to export to the OVF, but it is grayed out.

  Am I missing any customer authorization or plugin for vShpere?

  Discovered that vSphere server had some modifications made by HIM to resolve the violation POODLE. HE had to set the ip address of the machine where export OVF will be performed. Which allowed the connection to establish vsphere client and perform an export of the FVO.

• backup of the virtual machine fails HotAdd mode if the virtual machine is running?

  backup of the virtual machine fails HotAdd mode if the virtual machine is running?

  sometimes. When vmware tools is outdated, some os comments will be omitted to suspended snapshot. During this time, the backup may have failed.

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• Virtual MACHINE disk, but not in the inventory

  I have a virtual machine that has disappeared from the inventory, but is still in the (non-local) data store. In my view, that it was off. I tried to add to the inventory, but received a message that a virtual machine is already registered with that name. I believe that these are the steps that led to this State:

  I had a consultant in an ESXi host to replace it with a new one and a few weeks ago. All virtual machines have been moved out of the old host. The virtual machine in question was arrested that we did not use it. I just noticed today that it was not in the inventory because now I'm ready to use it.

  Another change that happened a few weeks ago was replacement unit vCenter vCenter. I don't know if who had nothing to do with him or not.

  Any suggestions how I could see the virtual machine in the inventory again?

  Hello

  As you can see this message, "received a message that a virtual machine is already registered with that name", while adding another virtual machine name use inventory. However, be sure that this virtual machine is not already.

  Concerning

  Mohammed

• What concurrent virtual machines are launched to start the failover or failover test

  Hi friends,

  What the simultaneous virtual machines are started when the failover or failover test is started?

  6 virtual machines are cocurrently recovered or the number can be configured?

  Thank you.

  Hello

  The number of virtual machines simultaneously recovered was 2 virtual machines per host up to a maximum of 20 virtual machines with MRS. 4.x ( http://www.vmware.com/files/pdf/VMware-vCenter-SRM-WP-EN.pdf document "Best Practices" 18 States, but I have seen 20 myself several times).

  With SRM 5 the number is unlimited by default (http://www.vmware.com/files/pdf/techpaper/srm5-perf.pdf, page 13), but can be changed (overall or specific cluster): http://blogs.vmware.com/uptime/2011/10/working-at-the-edge-of-srm-5-limits.html

  Michael.

• From virtual machine automatically at startup of the host

  Hello

  I'm trying to find how to start a virtual machine automatically at startup of the ESXi host.  I think I did in ESX 3.5, but have so far been unable to find a similar feature in ESXi.

  Is this possible in ESXi?

  Thank you!

  I do not use ESXi, but if you go to the Configuration of your ESXi host and then virtual Mahcine start/stop tab is a box of properties in the right corner?  If so, like ESX, this is where to put it

• Install the new virtual machine as a guest of the installation of boot CD

  Hello

  HOWTO install new virtual machine as a guest of the boot installation CD?

  first of all can I mount the CD drive?

  Best way to do is to download the CD image on your server ESX with WinSCP or FastSCP.

  Connect the cd player to the guest for this ISO image and make sure that the option "Connect to PowerOn" is selected.

  If you hav access your esx host you can also insert the cd in the CD drive, ESX host and connect the guest to the host drive. Check the option "connect to PowerOn.

  Start your virtual machine and it should start from CD.

  Arnim - van Lieshout

  -

• How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  Hey Preethi23

  It comes to the installation of vista operating system instance

  read the links below

  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

  http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  Walter, the time zone traveller

• Migrated virtual machine appears in the two data stores

  Hi all

  A bit of background on our installation first. servers ESX 3.5 vcenter 4.0 (just improved 2.5) + 2 + 2 data warehouses configured in 1 box of MSA.

  Here is what happened. I've migrated a VM from A to B data store using "Migrate" in vSphere client on vCenter.

  On the vSphere client, virtual machine displays now two data warehouses. In the browser data store, the vme even appears in the two data stores. Datastore shows 20 GB to 20 GB provisioned and 0 GB to 20 GB used. B displays 20 of 20 put into service and used 20 20 GB.

  Migration seems to have succeeded. I migrated about 10 other vm and they reside only on a data store. All virtual machines are working properly. I tried to migrate the computer back to A virtual. He showed only a data store. But the problem appeared again when I migrated the vm to B. I tried to move the virtual machine back and forth between servers ESX, no difference.

  Any ideas? The virtual machine is working well, and it is not necessarily a critical problem. But it's annoying, because I intend to reorganize the data store has and the fear it could cause a problem.

  Thank you so much in advance!

  anything mounted on the CD/DVD drive, as an ISO which can be on A Datastore?

• Boot Camp - the virtual machine appears to be in use

  My Boot Camp partition works fine if I boot in there directly, but I'm unable to start melting.

  When I try to open the virtual machine, I get a message that says "VMWare prepares your Boot Camp partition to present itself as a machine virtual." which is interrupted by the message, "the virtual machine seems to be running" I click OK and I'm back where I started.

  Any advice?

  First of all, I reboot the Boot Camp partition natively and run CHKDSK /F at a prompt of commands and then reboot and let is scan and after returning to the closing of the Windows desktop, not restart.  Start up the Mac and start directly in OS X and then delete "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines" folder in order to get rid of the Helper and Boot Camp files at this location then run the merge again and try to run the virtual partition Boot Camp Machine.

• Unique use of VM CPU on the system dual quad core CPU

  My environment: two machines, a Dell 2950 with dual quad core CPU, running ESX 4.0 Advanced.

  Machine 1 to several virtual machines on it.

  Machine 2 has a virtual machine that hosts a .NET/IIS web application built by an external supplier. The web application is having performance issues (users requests take a long time to complete in some cases). I suspect, without having yet done an in-depth, analysis is that the web application is not well resolved/optimized/designed.

  The declared owner of hardware requirements is exactly how Machine 2 is - dual quad core CPU. However - There's the rub: I did not understand if a single virtual machine running on this computer can actually use all the resources, particularly CPU resources, on the machine. And my application provider takes that position - since we have not met the minimum hardware requirements for the application, which can be the cause of the poor performance, which means that the seller has no responsibility for the performance issue.

  I tried to understand/consider the Enterprise more than vSphere edition, because it seems possible that only this version of vSphere would allow me to assign all the hearts of all the processors from the server to the computer virtual one. However, this seems like overkill, and also, after some reading on the SMP of Enterprise Plus features, it seems, as using SMP can help in some cases and poorly in others.

  Right now I'm looking to remove vmware Machine 2 and just install the application on the machine, in order to eliminate the possibility that vmware restricts the application to all physical resources (CPU). But I thought I'd ask a glimpse of this group first.

  Any input appreciated.

  Thank you

  Brad Harding

  Each physical core (or "core" hyperthreading) is considered to be one vCPU. You will therefore 8 vCPUs in your system (assuming hyperthreading is not enabled). However, you can approve vCPU which means that you can run several virtual machines than available vCPUs. This is because you do not usually have the VMs that need all the power of the processor, and they can be used more efficiently with VMware planning the vCPUs.

  André