Unique use of VM CPU on the system dual quad core CPU

Similar Questions

• Could use a little help from the system recovery

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Sdallnct wrote:

  My son has a HP DV something 21XX Entertainment laptop computer running XP. He had some serious spyware that I couldn't get cleaned up and I "discovered" restoration of the system using the F10 key. I did it. He acted as a whole new computer I have registry and all. I had assumed that he had whipped the own HD. However when I tried to update XP it said I didn't have the room. And of course a 'C' drive it's full of things. So now I'm a bit lost and I was wondering if there is a guide step by step somewhere (yes I should have asked prior to taking title).

  1. I see as well a C drive and a system recovery disk. Who now works or how can I say.

  2. I'd like to if I don't lose any of his stuff. Actually I'm passing some of them to my external drive for 'safe keeping' if all goes well

  3. I have not been able to get on the net wireless, but have been wired. That is probably an update is necessary? It shows my network and that I am connected, but it won't actually show anything "page not found".

  4. I download some spyware now so I can check my system restore it cleared out.

  For any help or suggestion or pointing me in the right direction would be appreciated.

  BTW, my son computer is a few years old and was one of the models who had the bad mother and HP the extended warranty on. They did replace the MB warranty (about 16 months after purchase). It's quality service and I have so I have several brands of laptops, I'm not yet ready to upgrade sound, if I do not.

  Thanks again!

  Hello

  Here is a link to the system recovery with much information.

  Your operating system runs from your C: partition. D: is the recovery partition.

  As far your Wi - Fi connection... going to try Google chrome or another browser to see if you can connect. There is a little bug in IE (I guess that's what you use) which may prevent it from connect to web pages.

  You have probably a Trojan or malware on the system. Try to go to www.ESET.com . Look on the right side under quick links and use their scanner online. It will find all things 'wrong' that is on your system and delete, if you may of course. As far as I know, they are the best in the business. Everyone has a favorite and this one is mine. I have install on the PC of the client frequently and for three years have never had a client complain about viruses, Trojans, adware or malware.

  Do not update your pc had SP2 before having to operate satisfactorily and have done a Windows system restore point.

  post your results (positive or negative) here in your thread so we know how it works for you.

  Kind regards

  ERICO

• CPUID (1) do not return don't not every bit of functionality on the new Xeon Quad-core processors?

  I use VMWare Player 3.0.1 build 227600 and have noticed the same problem on Windows xp and RedHat Linux images a quad-core Xeon. A colleague has seen the same problem using Fusion as well.

  On the host operating system (Mac / Windows / Linux) I am getting the output of the CPUID (1) next:

  CPUID (1): eax = 0x000106a5 ebx = 00100800 ecx = 0x009ce3bd edx = 0xbfebfbff x 0

  Present exactly the same code within an operating system invited to VMWare Player:

  CPUID (1): eax = 0x000106a5 ebx = 04100800 ecx = 0 x 00980201 edx = 0x0febfbff x 0

  Futher code in the library specifically to care little 28 in the edx register, which is located on processors that support hyperthreading or multiple cores (and as we know, the new Xeons support both). My images VMWare configured to run at 2 or 4 processors, but identification CPUID code does NOT see EDX bit 28 as being fixed. Example code for the multi-CPU identification of Intel assumes this bit is defined for topology CPU counts as well. (I won't go into the other differences in ebx, ecx and edx).

  The same test code running on a Core 2 Duo on the host operating system product:

  CPUID (1): eax = 0x000006f6 ebx = 01020800 ecx = 0x0000e3bd edx = 0xbfebfbff x 0

  Operating exactly the same code in a guest OS in VMWare player on the Intel Core 2 Duo (same image VMWare):

  CPUID (1): eax = 0x000006f6 ebx = 00020800 ecx = 0x0000e3bd edx = 0xbfebfbff x 0

  As far as I know, the only variable here is the CPU. The code that runs directly in a welcome what OS behaves properly on the Xeon Quad-core and Core 2 Duo, so the problem seems to be somewhere in VMWare Player.

  From what I saw, there were several problems Xeon in VMWare for a while - maybe it's just another one of them.

  Has anyone other saw this and have a reasonable and safe solution to correctly detect the core CPU / cache topology if VMWare is the mixture?

  If you run your guests with binary translation, we are unable to intercept CPUID executed at CPL3, because that code runs in direct execution.  Under the binary translation, that we can only intercept CPL0 CPUID instructions that we translate.  The title of the material assistance to virtualization, intercept us all the instructions of CPUID, regardless the privilege level.  I suppose you issue CPUID from user code at CPL3.  You should be able to play with the privileged execution mode and see the effects of translation binary vs VT - x.

  Under translation binary, if you "clear acceleration", that we can intercept all the instructions of CPUID, because then everything is translated.

• VM can't see that 2 CPUs in the Manager of tasks on Dual Quad - Core ESXi

  I use ESXi 4.0 on Intel ICH7 Council.

  ESX Server sees 2 PCPUs and 8 vCPUs (without hyperthreading). It is a system of double-quad 2.5 Ghz.

  I assigned 4 vCPUs to install a VM and installed XPx64.

  After installation, the Task Manager shows only 2 processors.

  The Device Manager shows 4 processors.

  Device Manager displays Multiprocessor PC ACPI x 64

  When I max the ESX virtual machine CPU tops out at 5 GHz used on 20 GHz maximum, so only 2 hearts are used by the virtual machine.

  I installed the VM tools and restart - no change.

  I reinstalled the driver ACPI - no change.

  I checked the mobo BIOS and all the VT type parameters are enabled, which is how I could get the ESXi to see 8 procs in the 1st place.

  I connected the ESXi Server vSphere and installed XPx64 using 8 processors.

  The VM shows still 2 CPUs in the Manager of tasks and now 8 in Device Manager.

  Is there a restriction that I am not aware. I tried a 2nd Server ESX 4.0 (no ESXi) and it shows the same behavior on a double-double (4 physical) processor.

  I don't know what the problem is. I know XPx64 supports more than 2 processors as I installed directly on the Board that ESX is installed and reached 8-processor in the Task Manager.

  Someone at - it any other ideas? Thank you.

  I believe that XP Pro supports only two physical casings, although it recognizes other nuclei (or HT).  There is a setting that you can change in order to have your vCPUs appear as kernels rather than separate half-bridge processors.

  http://www.yellow-bricks.com/2009/06/04/per-processor-licenses-for-your-application/

  -

• Failed to save the Mac Pro Quad Core 10.8.5

  I recently installed Mountain Lion on a newly formatted on my Mac Pro Quad Core Intel Xeon desktop drive, installed all updates to 10.8.5 and now when I try to record on the 1 TB drive, says the disk is locked. When I try to copy files to the boot disk, I authenticate first. The other 2 HD copy and record properly. What is happening that I can't save or copy on the new drive? My applications act as they are also used for the first time. I did a "Get Info" to verify permissions and changed to read & write for all accounts.

  Thanks for your suggestions. It's frustrating!

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• I can't find "score" in disk utility.  I used it when I implemented the system.  Thank you.

  I don't find the Partition tab in disk utility.

  It is not a.

  Partitioning of a hard disk:

  http://www.Kenstone.NET/fcp_homepage/partitioning_tiger.html

  To resize or add/delete an existing partition without data loss, you need to use, for example, iPartition:

  http://www.Coriolis-systems.com/iPartition.php

  But first of all it is important that you first save all partitions on a separate volume, any loss of data.

• How to use the Qosmio F50 Quad core HD processor in other software

  I would like learn how to use the image processor in other programs in addition to Toshiba Upconvert, transcoding, face Navigation and gesture of the functionality of the control. Someone has an idea? Thank you!

  I doubt that there are software available because the Cell processor is only a hand full of PC.

  If you have applications for creation of media professionals, you can get the plug-in to activate the cell processing.

• Host is not all hearts on dual quad-core system

  Hello

  I've been Googling it until I'm almost blind.  Any help would be greatly appreciated.

  I have two HP DL360 G5 servers, both with two processors quadricoeurs running ESX 3i (built-in), version 3.5.0 build 123629.

  Creating new virtual machines, I noticed that there are only four processors to choose even if the description in the summary - & gt; General - & gt; States of processors I have "8 x 2,666 GHz CPU" (see attached image).

  Is this a problem with the license?  On Configuration - & gt; Under license features - & gt; ESX Server Edition, I have an entry for "up to 4 - way virtual SMP".  Does this mean that I won't be able to take advantage of all 8 cores?

  Thank you

  Scott

  Thread moved to the ESXi 3.5 forum.

  -Fix the ESX 3.x supports only up to 4 virtual processors to a guest.  When you run multiple guests, the software will take advantage of all the CPUs available for her

• Is it possible to see what is running in the system idle process?

  Too often, my laptop computer Windows 7 system slows down to a crawl. Lambasts the drive. And Windows 7 will be smart enough to know that things are bad, but not smart enough to know exactly which slows down things. It is simply asking if I want to use an interface that uses fewer resources.

  If I look at the screen in a program called Process Explorer, it is said that most of the cpu is used by a process called the system idle process. But you cannot stop this process. I need more information. What is past in the idle system process that slows down my system to a crawl, alarming even Windows 7 and stolen my hard drive - it's what I want to know.

  On Friday, May 24, 2013 10:44:14 + 0000, Simon_671 wrote:

  If I look at the screen in a program called Process Explorer, it is said that most of the cpu is used by a process called the system idle process. But you cannot stop this process. I need more information. What is past in the idle system process that slows down my system to a crawl, alarming even Windows 7 and stolen my hard drive - it's what I want to know.

  Anything that slows down your computer, it is not System Idle
  Process. "System idle process" is not at all no problem. Means "idle".
  "not in use." It's just the name of the system is done when
  It doesn't do anything. It's there just to make the total to add up to
  102 g

  Ken Blake

• How to use HX85BA sensors with NI DAQ system?

  Hello

  I'm trying to connect two sensors of Omega HX85BA moisture to my NI DAQ system. The sensors detect moisture, barometric pressure, and temperature, using three 0 to 10 VDC positive outputs @ 10 mA or less, with a common thread of output. I have a SCXI-1000 chassis with two modules SCXI-1100 cards, 1102 b and a single 1102. Map of 1102 uses a block to connect SCXI-1303, while the other three cards use some 1300 years. The system will mainly use thermocouples for temperature measurements, but there will be other types of sensors, such as the two HX85BAs.

  The manual of the product for the HX85BAs is not very clear on how to connect the sensor to the system. Terminal blocks each have 32 channels with the positive and the negative screw terminals, it doesn't connect three positive sensor outputs to individual channels, with the municipality of output connected to each channel? It will work installation with SCXI cards I have, or I will have to purchase different cards? The system will be expanded to include at least 4 cards in a separate chassis SCXI 1000 more, is not a problem for the purchase of different components to adapt to the HX85BAs.

  Thanks in advance!

  Hi BBalmforth,

  You can connect the sensor to the SCXI-1100 1300 TB. Connect the positive output of CH + and CH - CHSGND. Common output wire must be connected to GND.

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• HP Envy 17 t - 3200 CTO: malfunction of the system equipment preventing startup. What material is dead?

  Got a HP Envy 17 3200 CTO LOADED at the time. Quad core, Radeon HD 7850M, etc.
  
  Well the other day something blue screened but froze during this process and seeds of graphs in this screen. Corruption and blocks appeared and disappeared. I was forced to close during the blue screen as something bigger was not working for the crash dump process, it stood at 0%.
  
  To restart the device display lights, and no noises are made beeps indicating a problem. The Bluray makes his usual preparation sounds it does every time you start upward. He's sitting with a white screen which seems not even to be turned on. The only other indicator is the key caps lock flashes several times and turns off, then blinks several times and turns off, repeating this sitting here...
  
  What part is probably dead on this sucker? CPU? DRAM? Motherboard? Graphics card? How badly can I turn if he doesn't...
  
  While he sits there, various lights keyboard are on as said... Caps lock flashing.
  Power LIGHT on. In my view, that the wireless light too... The light HP envy on the hood is also on...

  Come here to get advice because I do auto repair. No guarantee. I'll buy the requested Party and auto install like I always do for my laptop.

  Hi @woggles,

  Thanks for posting HP forums!

  I read your post and wanted to help.

  I understand that your laptop has crashed with blue screen, and after the forced shutdown, it starts with the white screen and some LEDs + flashing.

  You can check the link for the LED codes: HP - computer laptops does not start and Emits a LED or beep Code

  

  It is best to follow the steps on this link: HP Notebook PC - computer won't start (Windows 10)

  Let me know how it goes.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• M2N78 - THE violet CPU Upgrade? I bought an AMD Phenom Quad Core 9850 (Agena), but is not compatible?

  I have the HP Pavilion p6116f.  I tried to upgrade the processor and bought the AMD Phenom Quad Core 9850 Agena from tigerdirect.com, firmly believing that he was compatible in my sytem.

  http://support.HP.com/US-en/document/c01635734#n92 care of upgrading the card from my mother. The processor I bought was listed as compatible equipment, but after having tried several times to install it, I sent the object.

  I later learned that the 9850 Quad Core has been made to the 125 watts instead of the 95. Is this the reason why it is not compatible with my system? If anyone knows upgrades processor of success for this advice, please let me know.

  Hello

  It is very possible that HP has published false information.  The original processor for your PC has a TDP of 95 watts and is the card mother socket AM2 +.

  All these AMD processors are embedded for AM2 + with a TDP of 95 watts.  Remember that you have the latest version of the bios installed on your PC.

• the system svchost.exe uses 100% of CPU

  When I open the Task Manager, I see that svchost.exe uses 100% of CPU and almost crashes my computer. I would appreciate anyone's recommendations to overcome this problem.

  My OS is Windows XP Pro SP3 with IE8

  There is a fix!

  Manually download and install the KB2888505 fix: the link below.  It fixed this problem on my two XP systems!
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074

• Windows XP system using more than 50% of the CPU

  Hello

  Recently, my windows XP works very slowly, with system interruptions take up more than 50% of CPU, most of the time. I've updated all the drivers yesterday, the problem disappeared for a few hours then reappeared again.

  Thanks in advance for any suggestions.

  Start your machine in a "Clean boot" State and see if you still have your problem (I bet you won't):

  "How to configure Windows XP to start in a"clean boot"State
    <>http://support.Microsoft.com/kb/310353 >

  If the problem goes away in the clean boot state, then use MSConfig to find out which program or service is causing the problem:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  There is a lot of trial and error, but finally you have to narrow down the cause of your problem.

  HTH,
  JW