Virtual MACHINE suspended on Haswell, may not resume the Sandybridge, despite the CPUID Westmere-level masking in place

Similar Questions

• Using the same virtual machine on two macs, but not at the same time

  Hello

  I searched this site and the Internet in general, but I couldn't find an answer to this question, so my apologies if this is requested before and if so, please point me to the answer.

  I have an iMac with Bootcamp with Windows 7 Professional x 64 partition and everything works fine.

  I would like to install 6 Fusion and create a virtual machine from the Bootcamp partition, try it for a while and then delete the Bootcamp partition. I found a complete documentation about this and I should be able to do this without any problems, except perhaps for the reactivation of Windows.

  Now the question: since I move sometimes, I would like to be able to move this virtual machine on a Macbook Pro, so I must not move file, sync, etc., and the virtual machine will not at the same time. I read that you use Move so the address UUID and Mac do not change, but I don't know if this applies to move the virtual machine to another computer. If my is:

  (1) is it possible?

  (2) what I have to buy a second copy of Fusion 6 or there is a player that will allow me to run the virtual machine on the macbook?

  Thank you

  Luciano

  I have experimented with a Windows 7 VM, copied (but I have 2 licenses of retail sales) a mini Mac Core 2 Duo to a Core i7 MacBook Pro retina: well, despite the different processor, he did not ask a reactivation, strangely, even after a few resets. Windows 7 so, seems at least to be quite "tolerant", on this front.

• Virtual machine locked... can not find the lock file

  Sorry if this was picked up elsewhere, but I'm relatively new to the Mac and VMware, and my search proved fruitless, so I thought I'd try to post. The situation is the following:

  I'm under VMware 2.0 on a MacBook Pro, and my computer virtual running Windows XP Pro. My Mac has does not respond this morning (on the left in the night market) and if I pressed the power button to restart manually. Once I did, started upward as per normal, but when I opened VMware to start my VM it tells me the my Win XP Pro has been locked. After finding several documented cases of this, I went looking for the lock file, but it is not in my folder /Users/ [name] / Documents/Virtual Machines. When I try to take ownership, he falls down, while it provides a Configuration file: /Users/ [name] / Documents/Virtual Machines.localized/Windows XP/Professional.vmwarevm Windows XP Professional.vmx.

  I activated my finder to show all files in the folder (http://www.macworld.com/article/51830/2006/07/showallfinder.html), but still don't see the locking file. I searched (using the projector) for files hard .vmx and .lck .lock, nothing helps. I've seen a lot of discussion of the use of Terminal to solve this problem, but I have little (no) familiarity with Terminal Server or Unix, so I'm a bit wary of doing.

  Can someone tell me where I could find this lock file so that I can delete, or if not, how can I solve this problem?

  Thank you.

  CTRL-click on the entry in the Virtual Machine library and select Show in Finder and then ctrl-click on the packaging of the Virtual Machine and select the content of the package.

  Close the merge and then delete the .lck files/files in the package of the Virtual Machine.

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• I need a new Image of XP because my expired original but when I downloaded it again, the new XP said its has expired, too! I thougt of caching problem of virtual machine manager, but I'm not sure.

  VHD expired

  http://t.co/exzliimb - where I downloaded the XP VHD of

  http://t.co/8vhbKuzu - error screenshot

  I need a new Image of XP because my expired original but when I downloaded it again, the new XP said its has expired, too! I thougt of caching problem of virtual machine manager, but I'm not sure. I deleted all the VHDs before you download again. Any ideas?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information helps.

• Several virtual machines are running, but are not in stock

  Hi all

  I hope that someone has experienced this condition and can help.

  Here's what I have.

  I have 13 VMs (Windows-based) I did some tests with the help of EMC RP DR. All servers in a group to ensure consistency with the two LUNs. I was able to failover of the environment on the site of copy and then restore to the original location.

  However, today when I didn't return the case I lost 4 virtual machines.

  -J' have 9 virtual machines I see in vCenter Server

  -The virtual machines that I've "lost" are running, and I can connect using RDP, but they do not appear in vCenter Server

  -Virtual machines are in their records in their data warehouses. When I find the appropriate folder and try to add to the inventory, the option is grayed out. Which suggests that the VM is saved, but when I search I do not see the instance.

  PowerCLI command revealed that the two Mas I have 9 powered on virtual machines. Like I said all 13 virtual machines are running.

  I asked each his vmInventory.xml of the host in the cluster file servers registered on all hosts are 9 instead of 13.

  I have not disassembled the DS during operations of RecoverPoint failover, power off just the virtual machines.

  Fortunately, this environment is not in full production, but which is the right thing.

  Someone at - he encountered this rather odd situation.

  If relevant, Bay storage is EMC VNX and access is any block.

  Kind regards

  no problem you are welcome!

• Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Dear Experts,

  Please help me check why virtual bytes Perfmon takes more memory we allocated.

  OPERATING SYSTEM

  Windows Server 2003 R2 Enterprise Edition x 64 Edition Service Pack 2 (build) 3790

  ORACLE

  Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production

  PL/SQL release 11.1.0.6.0 - Production

  CORE 11.1.0.6.0 Production

  AMT for 64-bit Windows: Version 11.1.0.6.0 - Production

  NLSRTL Version 11.1.0.6.0 - Production

  Total RAM on the box is 8G

  Swap file

  Windows virtual memory equal to C, D, E, F discs is set to M 12273 and allocated now is 11262M

  LPENABLED is not defined

  SQL > show parameter pga_

  pga_aggregate_target 0

  SQL > show sga

  Total System Global Area 5344731136 bytes

  Bytes of size 2114736 fixed

  4630514512 variable size bytes

  671088640 of database buffers bytes

  Redo buffers 41013248 bytes

  SQL > see the memory settings

  hi_shared_memory_address 0

  memory_max_target 5G

  5G memory_target

  shared_memory_address 0

  SQL > show sga parameter

  lock_sga FALSE

  PRE_PAGE_SGA FALSE

  SGA_MAX_SIZE 5G

  SGA_TARGET 0

  Question:

  Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Thank you for your time and help.

  When you talk about Oracle.exe you seem not to take into account

  -L'executable memory will too

  -Oracle is a multithreaded Windows process, so memory consumption goes also to the different client that are connected to the database session.

  This means, you consume approximately 3G of memory beyond the LMS, and it is quite reasonable.

  So if you want to make sure that oracle consumes less than 8G memory, you have two options

  -reduce the SGA

  You spend more than 50 percent of the memory of the SGA. Oracle has never recommended that

  You might be willing to v$ sga_target_advisor allows you to see the impact of this change.

  You may also set your SQL queries

  -the second option you have is to stop Oracle.

  For sure it will use less than 8G in this solution.

  ---------------

  Sybrand Bakker

  Senior Oracle DBA

• How to move a virtual machine to another store of data on the same host

  Hello

  I have a single ESX4 host with 3 data warehouses and I need to move a virtual machine to another data store, how can I do that since I don't have the ability to migrate the virtual machine when I am connected directly to the client with vSphere host and I do not have a server vCenter also?

  Thanks, Julien

  Hello

  Yes, you can use #vmkfstools-i /vmfs/volumes/datastore/VM/VM.vmdk /vmfs/volumes/datastore/VM1/VM1.vmdk

  For the record, the data store must be shared if you copy of VM and VM must be turned off. In the above command you copy VM.vmdk to VM1.vmdk and add the newly created with this existing VMDK VM.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Some of function boxes are elongated and may not reach the OK box

  original title: Windows Vista - Control Panel customization to enlarge the font size.  Some of function boxes are elongated and may not reach the OK box

  Using Windows Vista. I used the customization Panel control to enlarge the font size.  I discovered that some boxes, like Adobe Reader Print and function, in effect, the Personaization (to reduce the font size to original size) require a click OK. But the box frame with large font size, is elongated until I can't get the OK.  How to get to the OK or reduce the size of the police without the OK?

  Simply press enter instead of OK.

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  Hi gurrus and LucD

  I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.

  The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.

  Concerning

  Nauman

  Try like this

  $report = @)

  {foreach ($cluster Get-cluster)

  foreach ($rp in Get-ResourcePool-location $cluster) {}

  foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}

  $report += $vm. Select @{N = "VM"; E={$_. Name}},

  @{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "ResourcePool"; E = {$rp. Name}}

  }

  }

  }

  $report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture

• A problem with cc libraries "the file does not exist, you may not, or the file may be in use by another application".

  I'm working on our catalogue on INDesign CC 2015, I have a links to my libraries, I worked every day without any problem. I work on a Mac and Win system, I put the file on my disk hard or on files of cc.

  2 days ago, I opened the file and as a result with any missed links, when I tried to re-link on my library the program shown Indesign files missed this message "the file does not exist, you may not, or the file may be in use by another application", I contacted Italian cat Adobe they suggested me to change the name of the file I did but nothing happened, they suggested to create a new owner of the computer, but it did not work because I work within a team and the file is opened to others of collaboration. I have 333 links so what I shell do? Please help me, I have to finish this work, we need print it out as soon as possible.

  I had this problem after an Indesign file that we've been working on the opening of my colleague. She has made a few changes and then when I went back to work on the file of the library of all the links were broken and I had him "you don't have to leave."

  I've corrected the problems by opening Illustrator and rename the library. InDesign revived and everything from the library was connected properly.