Virtual router didn't work after the electricity blackout?

Similar Questions

• Persistent routes no longer work after the virtual machine restarts

  Hello community.

  I was hoping that someone can shine a light on a problem I have experienced. I have a virtual machine that multiple network cards. Some are exposed to the Internet, some are just private and some are B2B connections. Now, I put the roads for a particular to Adapater it limits by using this command: route add 13.x.x.x mask 255.255.255.255 if0x10005-p 10.x.x.x. I could pinch the IP address once I put it but once I restart the virtual machine of the road is still there, but I can no longer to pinch the INVESTIGATION period. This happens in several environments I.

  I am running windows 2003 which has been recently patched with the latest

  I'm running the latest ESX3 and VC 2.5

  Any help would be great.

  FYI - Pinch is another form of Ping.

  Set the gateway on the roads. Both that the getway is only not shared by any other way on the same system your traffic should go out any interface is associated with the network which is located in the gateway. in this way, you don't have to worry about the interface.

• Multifunction color HP LaserJet Pro 200: I can't print to my HP printer using wifi, it was working and stopped after the electricity blackout

  I got my printer to print via wifi and it was working fine but as the power went out a few seconds this morning, it will not be printed.  I even reset the wifi but does not always print.

  Well, for this issue:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  4. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower. If you see a line indicating the status: not connected, click on settings and Wireless Setup Wizard to connect the printer to your network.

  Finally:

  1. Click on start and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Apple TV 4 does not start 3rd Party applications after the electricity blackout?

  Just had a power outage this morning for several hours. After awakening from Apple TV 4, I am unable to launch third party applications. When you try to start, you get a blank white screen and the home button not responding. Menu seems to back me to the home screen, but sometimes the touchpad becomes blocked and you cannot navigate until you double-tap on menu to go to the screen saver and vice versa. Very strange.

  Apple TV restarting does not solve the problem. Hard reset by unplugging the ATV also doesn't fix it. Running the current version of tvOS (starting March 10). The only solution I've found also a full factory reset is to remove and reinstall all third party applications to run.

  I was wondering if anyone else has had this problem and found a solution easier? I'd not required after each power failure.

  I have the solution!

  I had a power outage Monday, when went to watch Netflix, I noticed the same problem.  I noticed it work with all my third party apps.

  I was able to fix by installing a new/different free application, which apparently syncs your appletv with your account.  Once I did that Netflix and all other third party applications began to work perfectly.

• 32 bit Windows Vista does not start after the electricity blackout

  Hello
  I was running the computer normally, and unfortunately, a power outage unexpectedly turns off the computer. Usually its not much, just start it as soon as the power is restored, however, this time on restart, it got stuck at the beginning (the screen with the slide bar through the green screen).
  It's the first time that, on an unexpected shutdown that has happened.
  I tried to leave the system operating at the start of the longest screen half an hour, but it seems as if the system was locked in a never-ending loop of the sliding, green bar as if the system can not find something to start upward.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Automatic restart of the NVR LNR0208C after the electricity blackout?

  Hi all

  In view of the type of power off/power on button the LNR0208C a (button, no switch), does anyone know if it automatically restarts after a power supply stop and reset?

  The NVR of DNR-326 D-link doesn't have this feature and I think it is very important and one of the NVR reasons exist and function is not performed by the PC.

  On the other hand, it can be connected via USB to an appropriate inverter?

  Best regards

  JA

  Response from Linksys engineering below:

  Power - in case of power failure, the NVR failure recovery automatically turns back once powered is restored. It will detect that I have is a power failure vs a regular push/off voltage via the button.

• Screenshots do not work after the IOS10.

  Screenshots do not work after the IOS10. I've tried several apps and the iPhone and iPad.

  Help please.

  < re-titled by host >

  You hold down the sleep/wake button first, the fast, click the Home button?

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

  Good luck!

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Qosmio X 500-webcam does not work after the installation of W7 Ultimate

  Hello
  I have a big problem.

  First: Sorry English is not my native language and I can't find a German support forum here.

  I have a new laptop Qosmio X 500, and I installed Windows 7 Ultimate 64 - Bit of news. I try to install all the drivers from the site Web of Toshiba, but it't really didn't work with the Webcam.
  I can't install it. It works once, I can install the "Web camera Application", but he says that it cannot find the web camera. Then, I uninstalled the "Web camera Application" and try to installed new.
  Who does not work now too. He asked: "if I'm going to delete all" but I delete them all! And I can not install the "tinstall.exe" I don't know what it is, but it is from the WebCam Driver of Toshiba.

  In the Device Manager there is no Web camera too.

  All means what? Is the WebCam broken? I've had the laptop for 5 days.

  Greetings

  Hello

  Qosmio X 500 shipped with Win7 64 bit OS so I really put t understand why you use clean install of the OS. Ultimate version is so important to you?

  At first, I must say that the Qosmio X 500 is more complicated for laptop for any new OS install and all things must be installed in the correct order.

  But back to your questions:
  > All means what?
  It probably means that you are missing something
  > Is the WebCam broken?
  Probably not. Install original OS, you got with your laptop and test the features of cam again.
  > I've had the laptop for 5 days.
  This statement is not relevant at all. If you do something yourself and it works not that's problem and even your laptop is 5 hours old.

  What now? is original OS install an option for you?
  You have created recovery DVDs until you have installed the clean version of Win7? I hope because without DVD, you won't be able to install it using the option of HARD drive recovery.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website