Virtual scrolling in PC2007 problem

Similar Questions

• Satellite Pro A210 synaptics touchpad cannot activate the virtual scrolling.

  Hi all.

  I see some previous posts that this problem has been addressed one way or another a few times and I have tried several fixes and have had no success.

  1. I have a toshiba L300 beside of me (girlfriends), and this feature works very well. V annoying!
  2. I was never able to activate scrolling. I know where the setting and tried to check/uncheck the boxes / press 'apply', then ok and the other way around.
  3. I reinstalled the drivers from toshiba (synaptics).
  4. I updated the bios of tempro. Although I just registed for tempro recently, the dates in the list of updates seemed quite old. That is to say. not much new stuff available anyway.

  This is where im at!
  Any advice would be apreciated.
  In addition, Realtec readers are related with the touchpad somehow?
  Phill has soon
  I have about a month left on warranty, so I hope it would be something that can be covered if nobody can help.

  Hello

  In my opinion what you already done is right and I m really the idea you can try except installation of OS more radical solution with recovery CD/DVDs. After that do what you will have new factory settings. As far as I know virtual scrolling is enabled by default and it should work after the first start.

  It doing this, you can do the ultimate test and remember, if this feature works or not.

• Tecra A7-202: Touchpad driver virtual scrolling does not work

  Hello, I have problem with Synaptics touch pad driver version 9.1.0 (laptop Tecra A7-202).

  When I run any program as administrator, virtual scrolling does not work.
  When I run the program as a normal user, everything is OK.

  Hello

  What's your Tecra preinstalled with designed Toshiba recovery image?

• Satellite L40 - 139 - after watching the video, I can't use the virtual scrolling

  Hello

  I own a Toshiba Satellite L40-139 under Windows Vista 32-bit. However, I think that this problem only applies to this model as other users are experiencing the same thing.

  I often watch videos online mode full screen (like on YouTube), but when I leave full-screen mode, I noticed that virtual scrolling stops working on the touchpad. This occurs in the latest versions of Internet Explorer and Firefox. I can still move the pointer, but cannot scroll. I also note that the icon in the taskbar freezes, because it does not meet all the movements on the touchpad. I have the latest version of the driver installed (10.0.3.0).

  Is it possible for Toshiba to issue an updated driver for the Synaptics pointing device which solves this problem?

  Thank you

  Hello

  It's the first time that someone has posted this question
  I checked this on my Satellite U400 and quest that; the touchpad works ok
  There may be a registry problem with your operating system who knows
  It would be interesting to know how the touchpad scroll function works by using the new OS installed

• Virtual scrolling

  How can I disable virtual scrolling?

  Reach:

  Control Panel-> mouse

  Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select ' scroll '-> ' One - Finger scrolling ' and uncheck the box (if they are checked):

  • Allow vertical scrolling
  • Enable horizontal scrolling.

  Click on ' OK'.

  

  Then go to:

  Control Panel-> mouse

  Click ' device settings ' tab choose " Synaptics TouchPad " and lower, click on ' settings... '. In the list that will be there, select " scroll "-> " scrolling two - finger " and uncheck the box (if they are checked):

  • Allow vertical scrolling
  • Enable horizontal scrolling.

  Click on ' OK'.

  

• Smooth scrolling Firefox 40 problem

  Since I upgraded to Firefox for PC 40, I noticed that the smooth scrolling is not smooth at all. Fact scroll the page, but the text is choppy I scroll down. By "jerky", I mean that it seems that it is refreshing and redraw on the page instead of scrolling.

  Unchecking the options-> advanced-> general-> use of smooth scrolling eliminates the jerks, but now the scroll is not smooth and now is similar to a button "next page".

  Scroll smoothly worked very well in 39 FF.

  I have an eVGA (NVIDIA) GeForce GTX 960 graphic card running v353.62

  Any ideas? I'm NOT having this problem in Edge or Chrome 44, so I guess it's Firefox 40 associated...

  Hi, it's probably because of the current nvidia gforce driver be blacklisted to use hardware acceleration, due to an explosion in firefox crashes, it was originally in windows 10 until this problem is resolved...

• Yoga scroll 2 Pro problem

  I've had my Yoga 2 Pro for about 3 days now. It worked perfectly until I installed a BIOS update (at least that is what I am attributing this question). After that, the way my touchpad scrolling is very glitchy. It will sometimes reversing on its own in a fluid motion, or everything just jump to the point where I started scrolling, sometimes even to the top of the page. If anyone has any suggestions I would be grateful. I love this laptop and it's not exactly a break point, but it is extremely frustrating.

  Read on another site that there is a problem with the driver for the touchpad synaptics current (17.0.8.7), so I uninstalled and installed the previous version (17.0.8.4). I had also started to experience problems when programs such as adobe reader and microsoft word would zoom randomly when scrolling down or zoom out when scrolling upward. Roll back the driver has been solved the problem (restored the driver about 2 days ago)

• Scrolling with Manager problem

  I created a datagrid customized with a header and vest statusbar.  Extends the DataGrid control manager and it contains, I added a static ColumnHeader (extends Manager), a body (up to VerticalFieldManager) and a static StatusBar (extends Manager).  I gave the class Vertical_Scroll and Vertical_Scrollbars body and the scrollbars appear when there are more lines that can appear in the visible area of the body.  My problem is when I scroll through the lines in the body, the body section only is repositioning itself not when datarow (extends the scope) turns off the screen.  Only when I reached the last row will be the body section extricate himself showing the last rows.  I tried just about everything that I can think of to fix this, but I hope someone can guide me in the right direction.  Moreover, the header and the statusbar are always fixed and visible.  What I need to manually redo my body section as the update field turns off the screen?  I thought the VerticalFieldManager would handle this for me.  Thank you for your time.

  BTW: I use sim JDE 4.7 and Blackberry Tour.

  Too bad.  I thought about it.  My lines were HorizontalFieldManagers at least one active field they contain.  What I need to do, is create a custom listfield, not inherit horizontalfieldmanager.  Thanks in any case.

• A virtual machine has connectivity problems

  Hello

  I have a server ESXi 4.1 on it with three virtual machines.  For purposes of discussion, I'll call them VM1 and VM2, VM3.  They are all on the same ESX switch.

  This server has a financial application on VM1 and this configuration worked well for about a year.  Then, all of a sudden this week after users began to have popups while their financial applications, say things like other tables running could not access or that they could not communicate with SQL Server, etc. As far as I know, nothing new got installed, etc. this week on this server.

  I discovered that when I PING another post from work or another physical server for VM1, it loses a lot of PING packages.  There could be 20 consecutive PING responds and then five PINGs that do not meet but no defined trend.  However, when I PING VM2 and VM3 from these other workstations or other servers, they have no problems with PING.  I did PING extended for 10 to 15 minutes and only VM1 continues to have problems with PINGs.  It is not only a problem of PING as users are getting disconnected from their financial app and I can't connect to VM1 using RDP, etc.when happening.  Then, no doubt VM1 connectivity is lost intermittently.

  When I PING the VM2, VM3 to VM1, no PINGs are lost.

  The physical server that hosts ESXi 4.1 has two network adapters integrated but alone is used now.  Thus, all virtual machines are physically connected to the local network through a NIC

  We have a new Ethernet switch so I temporarily moved the LAN cable connected to the ESXi server to a port on the switch again and looks that much worse.  And again single VM1 lost PINGs.  VM3 and VM2 were very good.  I put the LAN cable to the original switch port and it seems that it is better but worse that before install me the LAN cable.

  If anyone can give me advice on how to solve this problem, I would appreciate it a lot.

  Thank you very much for your help.

  Off you first need to understand what is happening... You need to isolate what is a VMWARE problem, a server or network problem.

  I would start by ping from machine VM-virtual... In this way you take all opportunities that all physical connections are stop things from work.

  NM, you have already done this... Its good

  Which means that ICMP queries are good in the VSwitch. Internal network traffic so can't see any problems.

  So the problem is most likely will lie about how your traffic destined to this server is routed to this server.

  I would start by

  DNS. Check and see that your DNS is working properly and that all your zones are registered. Flush DNS on servers and workstations.

  Also try to reconfigure the VMswitch or linking this server for the spare VMnic if you can to see if it clears up your problem. Also try turning off the firewall as mentioned above...

  But first of all to identify the problem and were breaking is Lyon. Good luck

• scrolling with keyboard problem

  When scrolling with down, he reached the end of the page

  You may have switched to the keyboard navigation.

  • http://KB.mozillazine.org/accessibility.browsewithcaret

  You can press F7 (Mac: fn + F7) to toggle the power switch keyboard navigation.

  • Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."
  • http://KB.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
  • http://KB.mozillazine.org/Accessibility_features_of_Firefox

• Scrolling text tools problems

  Hello. Recently, there is a problem with my marquee tool. Whenever I used the tool move with this tool, it happened.

  

  How can I fix it?

  Hi Self-taughtNoob,

  Please try and reset the Photoshop preferences

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• newbie question: adding existing virtual computer hard drive problem

  I'm under esxi, 5.0.  I've created a 1 TB LUN in my san using unisphere.  I see the data store in vsphere.  I tried to add it as another drive on my windows 2003 server.  He would drive G.  but it never shows in "disk Management".  I've done it before on my 2008 servers.  not sure why its not showing in 2003.

  Thank you

  Hello and welcome to the communities.

  You add it as a virtual disk or a RDM?

  Virtual machine properties reflect the drive being there?

  Rescan you the storage in Windows, after adding?

• Snow Leopard 10.6 running as a virtual machine under Lion problem

  Hello!

  It is the first time I'm trying to merge.  I read a post that was now possible with the new release of the Fusion to install the version no of OS x Server Leopard and Snow Leopard.

  I downloaded the trial version free and started the merger... Inserted my Snow Leopard 10.6. DVD retail, but I got the msg that Mac OS x Server is not the guest operating system.

  How can I install it?

  THK.

  Is the post where I read the article: http://arstechnica.com/Apple/news/2011/11/VMware-Fusion-users-can-now-install-Leopard-Snow-Leopard-in-VMs.Ars

  This article was written during the brief window where you * might * install SL customer in a virtual machine, before Apple explained their license agreement with VMware.  It is not possible, because it is a violation of the policy of Apple.

• Scroll text frame problem

  Not sell me the floating Frame option

  Ahmed el Billboard creator Cuando me appears todas las opcines except Frame floating

  Quiero hacer lo that hace este tutorial, pero no puedo continue justo cuando usa esta opcion.

  What supone as tengo do?

  http://www.YouTube.com/watch?v=k-20irfB4M8

  I don't see the scroll image option

  When I opened the common options for creative decorative Panel I have listed all of them except the SCROLLING TEXT BLOCK.

  I want to do what made this tutorial, but I can't continue when just using this option.

  What are, we assumed that I must do?

  http://www.YouTube.com/watch?v=k-20irfB4M8

  This video is accurate. After pasting the image contained within the container, select the image of container (not the content frame), and then the scroll images option should appear in the overlays Panel when you scroll down.

• USB/Virtual COM port Communication problem with ESP301/LabWindows/CVI

  Hi all

  I have gone through different threads posted in this forum for similar issues and all tried, but nothing helped.

  I'm trying to communicate to the ESP 301 training monitor via a USB port configured as a serial COM port using a CR. Have it ' command is to get the version of the controller. The "write" "ComWrt" command works fine but the read command throws and error ("-99 operation e/s timed out"). I tried all the suggessions; with delays etc... who has explained (resolved by Mr. RobertoBozzolo) in the thread posted here, which explains an issue similar to that of the mine, but the help couln t.

  The code is attached.

  I am using 2012 LabWindows/Windows7 64 bit multi-hearts

  int Get_Version () {}

  comport = 3;

  BaudRate = 9600;

  parity = 0;

  DataBits = 8;

  StopBits = 1;

  inputq = 512;

  outputq = 512;

  ctsmode = 1;

  xMode = - 1;

  Timeout = 5.0;

  com_status = 1;

  char comstring [6];

  DeviceName [] = "COM3".

  Int State = 0;

  char * error;

  int bytes_written = 0;

  char Cmnd_String [50] = "";

  char Read_String [512] = "";

  strcat (Cmnd_String, "ve?")

  strcat (Cmnd_String, '\r');  Tried to 0x0d
  strcat (Cmnd_String, '\0');

  length = strlen (Cmnd_String);

  assert (Cmnd_String [length] == you? \r\0'); Tried Cmnd_String [50] = ' VE? \r\0 ".

  DisableBreakOnLibraryErrors ();

  RS232Error = OpenComConfig (comport, devicename, baudrate, parity, stop bits, inputq, and outputq data bits) ;// tried ouputq = - 1 too

  EnableBreakOnLibraryErrors ();

  If (RS232Error == 0) {}

  com_status = SetCTSMode (comport, LWRS_HWHANDSHAKE_CTS_RTS_DTR);

  MessagePopup ("Comport verified',"CTS Mode works very well");

  com_status = SetComTime (comport, timeout);

  }

  bytes_written = ComWrt (3, Cmnd_String, (Cmnd_String) StringLength);

  If (GetOutQLen (3)! = strlen (Cmnd_String))
  ComWrt (3, Cmnd_String, strlen (Cmnd_String));
    
  status = ReturnRS232Err ();      The status is 0
  error = GetRS232ErrorString (status); / / error number

  Delay (5.0); / / trying to add the time up to 20.0

  GetInQLen (3); Returns 0

  ComRdTerm (3, Read_String, 512, 13); Read from inputQ

  status = ReturnRS232Err ();               Status to return the error code '-99 '.
  error = GetRS232ErrorString (status); Error message "e/s timed Opération" out

  return the situation;

  }

  Can anyone suggest where I am doing wrong?

  Thanking you in advance.

  Another thing you should check is baud rate.  The ESP301 by USB is expected than the baud rate to 921600.  The function for OpenComConfig() group implies that it does not support this baud rate setting, but it seems to work perfectly.