Virtual Server disabled NIC.

Similar Questions

• Adding a virtual (server) computer in 10.142.0.0 go to 172.16.0.0 without additional NIC in the host? NAT?

  Hi guys

  I would like to add a (virtual server) in my current configuration - which is 4 host configured

  All virtual servers are on the 172.16.0.0 network - what is called network ROH

  I got another server in 10.142.0.0 between what is in the VLAN different.

  Is there any way I could have this server in 172.16.0.0 network so that I don't have to add additional network card and assign it to the Vswitch.

  I'm not a network expertise so is there a way it could be done? Using NAT / any other installation program?

  Please advice I will be really grateful.

  Thank you

  Rucky

  Before going into the configuration, can you please let me know your model of switch? Is - this switch L2 or L3? According to your requirment, we have L3 switch to talk of separate VLANs.

  Thank you

  Shan

• Configure the virtual server to 2003 to use two physical network adapters on the host

  I have a virtual server (Server 2003) that I'm trying to point two virtual NETWORK card to two different physical NICS on the host computer.  The two network adapters on the host are on separate networks, and I can't get virtual network cards to connect properly.

  I use VMWARE Server 2 with the virtual network manager.  All good instructions would be greatly appreciated.

  Thank you

  Run the virtual network Editor.  Disable the automatic bypass.  Then, specify which of your physical NIC to the bridge to VMnet0 and specify the other physical NETWORK adapter on one of the switches (2-7, 9) unused VMnet.  In the settings of your virtual machine, select a virtual NETWORK adapter to be filled, and a 2nd we use custom connection and specify what VMnet switch to use (the one you filled the 2nd NETWORK card physical to).

• Problems of mouse after the conversion of a hard drive file virtual Microsoft Virtual Server 2005 for ESXi 3.5

  Today I used VMWare Converter 3.0.3 to convert a file evaluation VHD Windows 2003 Enterprise Edition SP2 (Virtual Server 2005) ESXi 3.5. It seems to work without error. However, I have a pending issue. In other words, based on the results of pilot of "VMware Pointing Device" in my being rooted at the bottom right of the Virtual Console of the mouse. The mouse buttons seem to work, but the mouse itself will not move. I have VMware Tools installed and that you have reinstalled them several times, just in case. If I change the mouse driver to the driver "mouse Compatible PS/2", it works, sort of. It moves around the screen and the same slides perfectly in and out of the console window, as you'd like. However, it is jerky. Hardware acceleration is maximum. The video driver and all the other features seem to work perfectly.

  I converted a Windows 2008 VHD and it worked well.

  If I do a new installation of Windows 2003, it works perfectly, mouse and all. If the problem seems to be limited to a hard drive Windows 2003 virtual conversion. I don't have a Windows 2003 machine to test if the importation which would have the same bug or not.

  A very similar discussion was due in a previous thread several years ago http://communities.vmware.com/thread/36507.

  Any help to fix this annoying bug would be appreciated.

  Thanks in advance

  Normally uninstall us the services that we believe may conflict with VMware devices (such as mouse), so that these problems do not occur. But just to be sure, it would be nice if you could 'uninstall' as suggested CONTINIUM and see if that makes a difference. An only problem here, is that you will not be able to uninstall the present of the VMware VM and you may need to uninstall this VS VM before proceeding with the conversion.

  You can also see if this helps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002239

  Post edited by: paragsha

• Virtual server problem

  We are having a problem with pages not displayed for a virtual server that has been installed on one of our existing servers. If I ask index.cfm to the new virtual server, I get index.cfm to the existing virtual server. HTML pages are displayed correctly, and so are the second virtual server pages that do not have the same name as a file on the first.
  
  The symptoms are exactly as described in this technical note, but the catch is that "Cache web server paths" is already disabled in the CF Administrator (and the jrun.xml setting is also correct).
  
  Anyone know of any other cause of this problem (and, hopefully, a solution)?
  
  Thank you
  
  Tim
  
  

  For the benefit of someone else with the same problem, we solved this problem by following the steps in the http://www.bloginblack.de/archives/000120.cfm ( English translation)

• Alternative to IIS6.0 as SMTP virtual server

  Hi all

  My company does a cloud-based mail filtering and our last jump internally is fundamentally a vanilla Windows server with IIS6.0 enabled for SMTP delivery to our customers, a receiving SMTP is used by our system to capture logging to a database for our customer portal. A similar setup is used to deliver outgoing messages for customers who use us for the relay.

  We have been asked on the TLS delivery, but not all customers want to implement and if I understand correctly, IIS6.0 essentially deals with TLS as an all or nothing, there is no other opportunistic choice.

  Is there another solution that I can use? Preference is another function/role I can activate the virtual SMTP service, or a complement of standard Windows that we can always use with SMTP sink for our logging.

  EDIT *.

  Posted in TechNet, here:

  https://social.technet.Microsoft.com/forums/en-us/d9637c6a-87de-4A53-bdf8-abcf70ff3c6d/alternative-to-iis60-as-SMTP-Virtual-Server?Forum=winserversetup

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• can I install virtual server 2005 R2 on windows vista family 32-bit

  Hello

  Please can you tell me if I can install virtual server 2005 R2 on windows vista 32-bit family, because I'm trying to do, but an error apears "virtual server not supported by windows vista" knowing I have install all IIS services

  Please give me a solution

  Thank you

  Hello Me force,

  I suggest posting your question on our TechNet forums located here:
  http://TechNet.Microsoft.com/en-us/virtualization/cc150661
  Thank you!

• Download Virtual Server 2005 or 2008 for a Windows Vista Home Premium x 64?

  I am new to computers and I am not informed on a lot of what happens, I have a laptop Dell Inspiron 1545 and I want to download MS Virtual Server 2005 R2 or 2008 version, I downloaded the 2008 or thought I did, but I couldn't find it in the files he had an icon on my desktop. I went back and unfortunately he's said anything it would download on Vista Home Premium OS, I found that it would work on a XP SP2 and I was wondering if I can download that and then download the server 05 ' or ' 08? Where can I get XP SP2?  Apparently it don't load Windows 7 is this true? I downloaded a version 2005 to see what will happen after the download, I got pop ups saying that a modified installation wizard my computer and to download it again as I did but I still cannot find the server on my computer. Any help would be helpful as to what I could do to use Virtual Server etc. the Ms. Merci a lot for any help.

  Hi dumdeedumdum,

  The question you have posted is associated with Windows server and would be better suited in the Windows Server forums.

  Please visit the link below to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en-us/servervirtualization/threads

• Implementation of the small vFoglight Pro on virtual server?

  I install vFoglight Pro 6.5 in our environment. For the near future, it will monitor 3 vSphere ESX servers. Install on a virtual server would be ok or is it need a physical server?

  Hello Xafods,
  Even if you use a physical server is highly recommended, you can install vFoglight on a virtual machine that you allocate the necessary resources (as specified in the guide of the system configuration required) on the virtual machine to avoid performance problems.
  Concerning

• Licensing of Port on a MSE8000 can be converted to a virtual server of TP?

  I have a client with a MSE8000 with 80 port licenses and 2 x 8420 blades.

  They would like to go virtual; is there a provision for transforming these port licenses screen for a telepresence virtual server licenses?

  Thank you

  David

  The only way that you can convert the MCU licenses Telepresence license server is if you have a 5300 MCU series or MCU MSE 8510 blade, and it is through the process of installing the server TP on the MCU software, because the hardware can support.

• Installation of QPM 4.1 on Virtual server

  Hello

  Is it possible to run QPM 4.1 on a virtual server Windows 2003?

  ThanX

  Hi Neil,

  Answer - Yes.

  Reference http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/installation/guide/windows/KIint.html#wp1127196

  Concerning

  Derek Clothier

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• Is it permissible to install XE in a virtual server environment?

  Hello.

  I wonder if it is permitted to install XE in a virtual server environment (for example, the digital ocean droplets)

  as the specification for the virtual host is 1 CPU with 1 GB of RAM?

  Are there constraints based on licenses, because the 'drop' (= virtual server) probably works on a very

  more host (whose card I don't know)?

  Kind regards

  Matthias

  XE have been installed in many virtual environments such as Digital Ocean and Amazon Web Services. You can find many messages to blog about it. 11 g license Guide:

  Oracle Database Express Edition Oracle Database Express Edition (Oracle Database XE) is an edition of entry-level of Oracle database which is quick to download, simple to install and manage, and is free to develop, deploy and distribute. Oracle Database XE makes it easy to upgrade to other editions of Oracle without costly migration and complex. Oracle Database XE can be installed on any size machine with any number of CPUS, stores up to 11 GB of user data, using up to 1 GB of memory and using a single CPU on the host machine. Support is provided by an online forum.

  (The underlining is mine.) I think you'll install it wherever you want

• WebLogic 12 c on Solaris 10 virtual server

  I installed WebLogic 12 c on Solaris 10 virtual server.

  The server has 64 GB of RAM. and about 35 GB of swap space.

  When I try to increase the size of the segment of the managed server in weblogic than the segment size, it didn't start and tell me cannot allocate memory.

  I don't know why, he goes to the memory swap, although there is enough space on the RAM.

  I tried at my end and I see something similar to what you see. I think that the behavior works as expected.

  If you run prstat t see you RSS which is the real memory used.

  -bash - $3.2 prstat t

  NPROC USERNAME SWAP RSS MEMORY TIME CPU

  20G of oracle 19 904 M 1.4 05:13:40 % 0.0%

  1 smmsp K 3152 M 11 0.0% 0:02:07 0.0%

  1 M M 92 106, 0.2% 02:58:46 noaccess 0,0%

  6 demon 8824K 11M 0.0% 0:03:07 0.0%

  30 root 112M 125M 0.2% 0:38:07 0.0%

  SWAP is all the memory your process will use, in my case, my pile is 20 GB, and the memory used is 904 M.

  When your process will really need more memory RSS will increase.

  Vmstat shows memory free as much as you're ok

  for example

  -bash-3, $ 2 vmstat

  kthr memory page faults cpu disk

  r b o swap free re mf pi po fr sr s0 s1 s2 s3 in sy cs us sy id

  0 0 0 3 53843968 43066624 10 21 9 3 3 0 0 2 0-34 2123, 1614 1525 0 0 100

  43 GB in my case.

  References:

  https://docs.Oracle.com/CD/E19253-01/816-5166/prstat-1M/index.html

  https://docs.Oracle.com/CD/E19253-01/816-5165/PMAP-1/index.html

  Best regards

  Luz