Virtual snapshot VM with SCSI Bus sharing

Similar Questions

• Adding a virtual drive on the SCSI controller with sharing fails physical/virtual

  I have added a virtual disk to a SCSI controller with bus sharing physical or virtual, which is put down to the code below. Same code gets successfully if the bus share is 'noSharing '.

  $vmView = Vim::find_entity_view (view_type = > 'VirtualMachine', filter = > {name = > $vms [0]});
  $controllerKey = find_scsi_cntlrkey (vm = > $vmView, controller = > $cntlr);
  my hash % =)
  VM = > $vmView,
  diskMode = > 'persistent. "
  fileName = > $filename,
  controllerKey = > $controllerKey,
  unitNumber = > $target,
  size = > "5242880",.
  backingtype = > "ordinary."
  UUID = > UNDEF,
  deviceName = > UNDEF,
  );
  My $filespec = get_vdiskSpec (%hash);
  print Dumper $filespec;
  My $vdisk = add_virtualdisk (vm = > $vmView, devspec = > $filespec);

  Run the command:

  amrut@2:~/scripts/VMware/apps$ perl RDM_add.pl - vmname vm1 - Server vcenter_server name of [email protected] past Pass@123--op generation add - 2, 2 - controller filename vm_232
  Addition of new LsiLogicSAS vSCSI 2 Controller to "vm1.
  Successfully added
  $VAR1 = bless ({}
  'fileOperation' = > bless ({}
  'val' = > 'create '.
  (}, 'VirtualDeviceConfigSpecFileOperation'),
  'operation' = > bless ({}
  'val' = > 'Add '.
  (}, 'VirtualDeviceConfigSpecOperation'),
  'device' = > ({bless him
  'capacityInKB' = > '5242880',.
  "backup" = > bless ({}
  'Filename' = > ' [datastore1 (4)]/vm1/vm_232.vmdk',)]
  'diskMode' = > 'persistent '.
  (}, "VirtualDiskFlatVer2BackingInfo").
  'unitNumber' = > 2,
  'controllerKey' = > '1002',.
  'key' = >-1
  (}, "VirtualDisk")
  (}, "VirtualDeviceConfigSpec");
  Cannot configure the virtual device.

  amrut@2:~/scripts/VMware/apps$

  In vcenter GUi I get below error:

  Has no power on scsi2:2.
  Cannot add the disk scsi2:2.

  But more successful if sharing of bus is none!

  amrut@uptohell2:~/scripts/VMware/apps$ perl RDM_add.pl - vmname vm1 - Server vcenter_server name of [email protected] past Pass@123--op generation add - 1:2 - filename vm_232 controller
  $VAR1 = bless ({}
  'fileOperation' = > bless ({}
  'val' = > 'create '.
  (}, 'VirtualDeviceConfigSpecFileOperation'),
  'operation' = > bless ({}
  'val' = > 'Add '.
  (}, 'VirtualDeviceConfigSpecOperation'),
  'device' = > ({bless him
  'capacityInKB' = > '5242880',.
  "backup" = > bless ({}
  'Filename' = > ' [datastore1 (4)]/vm1/vm1_232.vmdk',)]
  'diskMode' = > 'persistent '.
  (}, "VirtualDiskFlatVer2BackingInfo").
  'unitNumber' = > 2,
  'controllerKey' = > '1001'.
  'key' = >-1
  (}, "VirtualDisk")
  (}, "VirtualDeviceConfigSpec");
  Created virtual disk.
  amrut@2:~/scripts/VMware/apps$

  Can you get it someone please let me know, we should pass us any other parameter for the addition of SCSI controller with bus sharing physical/virtual disk?

  Thank you

  Celine

  Yes, the stand is adjustable to all types at deployment time.  You need to change your disk with the correct support add operation.

• MD1200 unified mode with 2 systems - shared volume

  Does anyone know how to run a MD1200 table in unified with a volume shared between 2 physical systems? The goal is to access the table with 2 different systems with each system see the changes on the other.

  I know it was not necessarily designed for this, but I thought I heard someone say it could be done.

  Any ideas on that?

  Hello StreaqS,

  The only way to make your configuration & change your stay intact data, no corruption is to put both physical systems in a cluster. Without having a cluster in place as soon as you connect the second physical host to the virtual disk, it will corrupt your data.

  Please let us know if you have any other questions.

• A single storage backup subscription can be shared with all family shared devices?

  A single storage backup subscription can be shared with all family shared devices?

  I have a family membership of 200 GB storage for 5 of my iPhone backups under an account id unique apple.

  I'm separating each iPhone at its own apple ID to avoid current problems. Can I share the backup of the storage with the family share?

  If I can't, I'll have to buy a subscription to backup for each device that will be more expensive.

  Unfortunately, iCloud storage cannot be shared under sharing of family.  See more details here- family shares - Apple Support

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• If we have 2 remote sites with the same shared storage, can we mount a drive shared on remote site?

  Dear Experts,

  If we have 2 remote sites with the same shared storage, can mount us a drive on remote site?

  • Assume that the oracle database is on the shared disk (for example HP 3PAR)
  • Primary Oracle server with storage as a common drive (storage shared on sites geographical apart) have all the files database.
  • failure, it is possible to mount the drive even at the remote site and mount the database oracle it?

  There must be no effect on the as it should the same disk that has dismantled master site.

  Thank you and best regards,

  IVW

  Thanks a lot mseberg

  Is it a design valid ?

  • We have remote sites and want to set up DR. As we only SE pare data is therefore no choice.
  • We think of the SAN replication option.

  Have you ever seen / configured such architecture or design?

  Can you please throw some light on this. Thanks in advance for your ideas.

  Thank you best regards &,.

  IVW

• You can use a virtual hard disk with a live linux iso (persistent) invited?

  If I format a virtual hard drive with gparted and then mount it, it becomes impossible to restart the client. Attempt to restart blocks upward with a blank screen, as if it does not find the bootable media.

  Restart fails even after specifying the CD drive as a boot device in the BIOS as described here:

  http://xmodulo.com/2013/08/how-to-change-the-boot-order-of-guest-VM-on-VMware-Player.html

  OK, everything works with the boot order in the BIOS set CD-ROM at the top.  I have to use the screen to reset the BIOS incorrectly. Thanks for the help.

• Latest installer called "17au your" crashes with a bus error.

  Hey, the most recent Flash Installer immediately crashes with a bus error when I try to launch it. I don't know how to solve this problem outside waiting for the automatic update and see if that fixes the problem. Does anyone have an idea how to solve this problem, or how report a bug?

  Thanks, I tried the installer suggested your link who worked offline and appears as 17.0.0.188 in system preferences.

  I had the installer on this machine with 10.6, but I never downloaded this manually from Adobe. An Adobe apeared pop up when I was using the browser to view flash content (television network), telling me that a new version is available. I put in place of Flash preferences to enable automatic updates, but it seems to somehow always suggest me to do with this pop-up window instead.

  I think remember that the automatic update is delayed by a few days, so I usually go for the install on the pop-up button.

• When exporting data to essbase with L0 members, shared members are also get exported.

  Hi, when exporting data to essbase with L0 members, shared members are also get exported.

  But I don't want to export another hierarchy!

  Example:

  project

  XYZ +.

  ABCD +.

  P00001 +.

  p00002 +.

  GFE +.

  p00003 +.

  p00004 +.

  all the xyz (Label only)

  ABCD (shared member)

  EFG (shared member)

  I want data to be exported only with P00001, 2, 3, 4.

  I think that the OP cannot use Level0 in DATAEXPORTOPTIONS, because not all dimensions are zero-level.

  Cameron, thanks - Yes, it's the behavior of the OP is seen (and disliking).  The share of 'level zero' which is in fact not level zero (in the primary hierarchy) is included in the output.  I think it's the problem rather than replication / repetition.

• How you connect to a Microsoft Web with Acrobat Mac sharing?

  When connecting to a Web with a MAC sharing, acrobat does not credential and displays 'permission is required for this network service.

  How do you get acrobat for entry of credentials? It works from a windows box.

  We've thought of it. It is necessary to connect via safari first, remember Keychain, the value, and then you can connect via acrobat.

• Development on to a hard drive with SCSI Paravirtual supported by VMware

  I've seen a lot of descriptions about how to get the operating system to start with SCSI Paravirtual, but I wonder what VMware is on it.  In the documentation, I remember that SCSI Paravirtual should only be used on the startup not reading disk.  Does not mean just because it's possible, it should be.  Would it cause a support issue or is VMware ok with this practice.

  Hello.

  "Boot a Linux guest on a drive connected to a PVSCSI is not possible. A drive connected using PVSCSI can be used as a database, not a system drive or boot drive. Start a Microsoft Windows client from a disk connected to an adapter PVSCSI don't is not supported in versions of ESX before ESX 4.0 Update 1. ' - of Ko 1010398

  Good luck!

• What virtual router goes with what configuration

  When close you a configuration creates a virtual router on the host computer, in some cases they are side by side in the list.  But sometimes the virtual router is set up far down the list of the configuration.  My question is how can you know what virtual router goes with what configuration?  I end up having to look at what data store its on and cross-references it with this organization.  Then I look everyone in the configuration for the combination.  Does anyone have a better way to know this?

  Alan

  Go to the vCenter and choose display "models and virtual machine.

  You should be able to expand the folders to see exactly where each configuration is set up, and routers should be stored with them.

  Don't forget, not to play with stuff from here... it was just suppose to look at the pretty ^_

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Linked clones (Windows 7 64 bit) deployining with logical scsi Bus controller.

  Hello

  I have typical problem with my opinion 6.0 related clones.

  Every time I recompose the pools, the pools of related clones (Windows 7 64-bit) deploying with a logic of Bus SCSI controllers. I check the image of the master, is entitled controller SCSI (LSI logic). I don't understand why its happening.

  Because the question virtual machine does not run.

  Can help with this.

  Concerning

  Surya

  Hello

  I found the problem.  In the main image, the disk has been configured with IDE, because its deployment with logical driver. Once I changed to SCSI drives everything works fine.

  Kind regards

  Surya.

• computers reomposed of office with the new machine virtual/snapshot - display now 2 NICs (a grayed out)

  I have reconstructed my pool of offices of origin VM1/snapshot1 to

  an another VM2/snapshot1

  Files user still there but I seem to be duplicate desktop icons, there are also 2 adapters vmxnet3 with a grayed.

  Why did I get this?

  found a solution for this.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1020078

  After installation of the patch from ms on the image a recomposition has worked for me.

  Thank you

  It seemed to have also fixed a thinprint redirection problem printer, I've had more early as well

• Snapshots created with the EqualLogic VSS provider are not displayed in SAN HQ

  Hello

  Poster for the first time. We have just implemented an EqualLogic SAN, PS6100X network, and we're having performance issues between our DPM backup server, one of our hosts Hyper-V and VM images stored on the San. I will try to provide as much information as I can

  Environment:

  Dedicated iSCSI using Dell Force10 switches network

  hyper-V (Windows Server 2008 R2) 3 hosts
  -2 hosts has a NETWORK 4 port GB dedicated adapter connected to the iSCSI network; 1 host has connected to the network iSCSI NETWORK 2 GB dedicated ports card
  -Each Hyper-V host computer has a dedicated on the EQ SAN, RAID-50 volume that stores the Hyper-V virtual machines
  -EQ VSS provider installed on all hosts Hyper - V 3 and works correctly

  Using DPM 2010 for backup

  Problem: on Hyper-V hosts 1 and 2, any/all backup activities are very slow. On the Hyper-V host 3rd, however, activities related to backup all are incredibly fast! We compared the NIC configurations, HIT / settings ME and ASM, but we cannot understand why it is so slow on hosts 1 & 2.

  In addition, whenever DPM 2010 tells the EQ VSS provider to create a snapshot, we see the snapshot being created in the EQ Team Manager, but he does not appear in the list of iSCSI connections. According to the documentation SAN HQ, instant and volumes should appear here.

  We also disabled TcpAckFrequency for all 3 hyper-v hosts. It helped a little, but there is still a HUGE difference with regard to backups of the DPM.

  We're pretty sure that there is something misconfigured on the hosts Hyper - V 1 & 2, given that the host Hyper-V 3 has no performance issues.

  How can I get snapshots to appear in the list of iSCSI SAN HQ connections?

  Version information:
  SAN AC = 2.2.0.5924
  Storage Array Firmware = 5.2.4

  There are two different issues in this post for the SANHQ doesn't show only not iSCSI connections.

  Now SANHQ displays the correct total connection number but doesn't provide details of connections individual iSCSI for snapshots, which it should. So in the meantime use Workgroup Manager that shows the details for each snapshot (I know that's not the best answer, it's a short term solution).

  The fact the SANHQ shows details of instant connection does not mean that they aren't here and I can't imagine anything to do with the question of the DPM.

  The real difficulty, look for upcoming beta SANHQ and subscription for this on the EQL support site. You can do it now.