Virtualization of hardware on Tecra M5 freezes the system

Similar Questions

• Qosmio G40 - 11 d - every 2-3 minutes freeze the system

  Hardware: Computer laptop Toshiba Qosmio G40 - 11 d, bios 2008, OCZ Vertex 3 SSD
  Software: Windows 7 Professional 64-bit all updates from windows update.

  Problem:
  Every 2-3 minutes freeze the system - to stop the disc - LED disc controller turned on all the time.

  I did the following:
  1. I installed the drivers of intel (iata_cd.exe) of http://downloadmirror.intel.com/19607/a08/iata_cd.exe
  2. I ran the ocz.reg script:
  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort0]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort1]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort2]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort3]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort4]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort5]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  The problem has been eliminated, but not quite. Now, the system stops only at idle speed... (aflter - 10-30 min)

  Let me know what I do next.

  Hey Buddy,

  Have you noticed the same behavior with preinstalled Toshiba or did it only with your new SSD HDD?

  You might have to update the firmware of the SSD. You should check the official website of OCZ if there is a newer version. If Yes, start the update firmware and then check again if it works or not.

• How to repair FCPX 4 K edition freezes the system

  PLEAS HELP!

  Only when 4 K editing until the addition of transition, red square pixels appear throughout the system and the screen freezes. Now, whenever I try to edit it, it does the same thing.

  Restart the system and all the programs work well, even to save the system for more than 10 hours without problem. As long as I'm not in FCPX. It seems to be a problem of overflow REM edition 4K. Technical support advised to hold command + Option + P + R to reset NVREM. It did not help.

  Someone please help! I'm almost done with my slide show of 4K 2 hours, but can not continue to finish.

  I thank very you much in advance!

  What are the specifications of your computer? What resolution are your slides?

  Russ

• 17.0.1 Firefox (and its windows install app) completely freezes the system (win7 x 64)

  Hello

  When I tried this morning to start Firefox 17.0.1 on my computer, everything stopped working. In fact, he worked for 0.1 dry and then hung for 10 seconds somehow I managed to open the Task Manager and tried to complete the process (tree), but the firefox process would not die. Hard drive did a very monotonous thing all the time, so I thought that the material may be responsible. I rebooted and uninstalled the old firefox (I use the system normally begin at the moment that I start ff), rebooted to chkdsk and Defrag the disk. (During the uninstallation, I also removed the personal preferences). When I tried to install it again (I'm a webdev and I NEED firebug) application of installation exact same thing with the same monotonous hard drive operation. It occurred just after that I pressed the first button below and before step 2 text was displayed in the window (it was empty with back, next and disabled Finish button).

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
  3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

  IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

  After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

  • (Windows 32-bit) C:\Program Files\Mozilla Firefox
  • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
  1. Go to the Windows Start menu and click on 'computer '.
  2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
  3. Find the folder "Program Files (x 86)" or "Program Files".
     • On 32-bit Windows, double-click the Program Files folder to open it.
     • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
  4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

  Now, go ahead and reinstall Firefox:

  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• How to enable virtualization technology? I can't find the system configuration screen.

  Model of HP is h8 - 1160t

  Pavilion Sys7 64 bit SP1

  Some command line say they use F10 for "configure the BIOS, but the 0 key not give not any system of configuration options.

  How can I activate the Virtual Tech?

  Thank you

  Hello

  Things are a bit hidden these days.  When you are in the bios go to security then system secuity.   You will see that it is disabled by default.  Make the change, and then save the settings.

  After that you start then try this tool to make sure that it is enabled.

  Test for 64-bit hardware  This test for two 64-bit, DEP and VT.

• Freeze the system restore.

  My computer has stopped working so I did a system restore to its original settings. After the reboot and loading all the windows update, the computer crashes right after the Welcome screen. Any ideas?

  If "my computer stopped working" started after you did something, tell us what you did

  If that began to arrive without changing your hard disk probably got bad sectors

  Try holding F8 at startup screen with boot options appear and choose fix my computer

  Then a screen with repair options should appear,

  Open the command prompt it and type this and press on enter: chkdsk C: /r

  It will scan your hard drive for errors and difficulty if it finds

  post results

• When running Need for Speed Most Wanted game a black screen appears and freezes the system

  When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

  get the solution online and qyit

  close the program

  debug the program

  and on the opening of the details, I see this

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NFS13.exe
  Application version: 1.0.0.0
  Application timestamp: 506ef77f
  Fault Module name: igd10iumd32.dll
  Fault Module Version: 9.18.10.3071
  Timestamp of Module error: 51493b0a
  Exception code: c0000005
  Exception offset: 0001 has 097
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Original title: APPCRASH

  When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

  get the solution online and qyit

  close the program

  debug the program

  and on the opening of the details, I see this

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NFS13.exe
  Application version: 1.0.0.0
  Application timestamp: 506ef77f
    Fault Module name: igd10iumd32.dll
  Fault Module Version: 9.18.10.3071
  Timestamp of Module error: 51493b0a
  Exception code: c0000005
  Exception offset: 0001 has 097
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  What is gd10iumd32.dll?

  These files more often belongs to the product shim NVIDIA D3D drivers.  and were most often developed by the NVIDIA Corporation. These files usually have NVIDIA D3D Shim Driver, Version 331.65 description

  Source:

  http://SystemExplorer.NET/file-database/file/igd10iumd32-dll

  What you can do

  1 see if you have the latest driver from Nvidia display.

  2. If you already later, uninstalling and reinstalling Nvidia Display.

  3 roll back to an older driver

• Tecra M3 freezes up, but I can't find the problem, please help! : D

  Basically, it seems to be something of a dry joint or lose the connection under the touchpad does about the pcmcia slots. The pc works only when pressure is applied to the plastic around the touchpad. Linux seems to work better than windows in terms of freezing. So, it can load an operating system and the bar going through and it just stops, it will not go further. The capslock light stick, as will numlock. However, once you apply pressure, she continues as usual. take the pressure off and it hangs again.

  Ideas?

  Hello

  Are you sure that there is nothing wrong with the HARD drive or Windows system files?
  You suggested that Linux works better than Windows.
  So I guess that the issue could be caused by a failure of the system.

  Have you tried to format the HARD drive and reinstalling the Windows operating system again?

  I can't believe that OS gel has something to do with the loss of connection, etc.. But who knows, impossible is nothing!

  In this case, you must contact the ASP in your county because the laptop must be professionally checked and this test can be done by a user of portable ordinaries like you and me.

  So good luck

• Tecra S1: After the installation of new Toshiba BT stack does not work correctly

  Hello
  I need help on my problem with the bluetooth configuration on my laptop tecra S1 with built-in bluetooth hardware.
  I have a Blackberry 8700 g with bluetooth function and Bluetooth Logitech headphones.
  At this moment, I have download the latest drivers from toshiba:
  Bluetooth stack
  Easy Bluetooth connection
  Bluetooth monitor

  The first time I installed the battery Bluetooth on my Windows XP / SP2 Machine.
  everything is ok...

  On the new start helping him material apears and installed Bluetooth RFBUS from Toshiba and a few more.
  After stopping and restarting, I have a magnitude of the 100% CPU usage.
  I start the monitor Bluetooth an i found new devices, but I can't connect to my Blackberry or my headphones...

  I think that the battery Bluetooth toshiba does ' t works well because there is the battery Bluetooth in XP/SP2 in the depths of the system.
  Can I use only Microsoft Bluetooth or only the Toshiba stack?

  Thanks for your replies
  Mike

  Hello

  In my opinion, you must use the MS Bluetooth stack or the Toshiba Bluetooth stack.
  If you want to know how to remove the battery Microsoft Bluetooth the OS with SP2, see Microsoft Knowledge base article:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;889814

  Good luck

• When I play a game on facebook called words with friends, my computer freezes the game after a few movements.

  original title: computer freezes

  When I play a game on facebook called words with friends, my computer freezes the game after a few movements.  Why?

  Hi ileendunman,

  1. have you done any hardware changes or software on your computer before this problem?

  2. what browser do you use?

  If you use Internet Explorer, you can follow this link & check if the problem persists:

  The problems of games online using Internet Explorer

  Hope the helps of information.

• Taskbar freezes at startup of the system

  Hello
  Since last week, I have problem with my windows 7 and I don't know how to solve.
  problem:
  Immediately after my pc on (boot is ok) my lower left panel freezes and does not meet all clicking. Also when I open a file, I can't work with this, because it does not.
  This is the only way how to fix - by pressing ctrl + alt + del. Nothing else.
  I must say, that I tried to reinstall it 3 times and after each reinstallation, it has the same problem.
  I tried to use the command sfc/scannow (all ok), I tried to scan the HARD drive - without errors and verification through the diagnosis of memory did not appear any errors of memory.
  I don't really know what to do. This problem occurs on the own w7, x 84.

  Thanks for help

  Original title: low start Control Panel freezes

  Hi Soldii,

  Thanks for posting your query in Microsoft Community.

  • You did it any significant hardware or change software on the computer before this problem?
  • You get the error message? If Yes, what is the exact error message you get?

  I can understand that the taskbar freezes when you boot your system.

  It seems that some third party software startup service hinders the normal starting procedure and so you are unable to work with the taskbar.

  I would suggest trying the following methods and check if the problem persists.

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• LR office freezes the iMac

  I have an iMac 27 "mid-2010 with OS X EL Capitan 10.11.6, 12 GB of RAM and LR 6.6.1 for mac in desktop version.

  This is the second time I open a thread for the same question.

  The problem I have is that you use LR freezes the iMac, the screen goes black, and the only way is to stop the mac of the power button and then restart it.

  This happens every time I use LR, often just a few seconds after it starts and I start to work.

  It seems to be independent from the actions that I do. It just freezes and there is no way to recover. I have to turn off the mac.

  In recent months, the problem started when I installed LR (6.5.1).

  In this case, with the help of the friends of the forum, I did a lot of testing to solve. Off the GPU, reinstalled LR from scratch without any result

  After several trials, I thought (for a week) that the problem was with firefox, because when I used LR, firefox always started and in two or three cases in which LR worked properly firefox did not work.

  Do more test I realized that this was wrong. LR freezes the iMac, even if is the only application running.

  LR after two or three times in that worked well was restarted to freeze the mac whenever I tried to use it.

  This occurs in the same way today with the new version of LR and the new version of the OS.

  The problem is generated by LR and not the mac that has never crashed or freezes without LR.

  I am very angry and annoyed by this behavior.

  I bought an app that worked correctly at least 10 times.

  Can someone help me solve the problem?

  Best regards

  Vincenzo Corrado

  I launched the AHT (Apple Hardware Test) which has detected a failure of the RAM. Now, I have to isolate which module of memory is affected by the problem. After that, I'll try to run LR.

  I you will know if the problem is completely resolved.

  Thank you.

  Best regards

• I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

  does anyone have a solution to this?

  Hello

  The following steps can help (try again after each):

  • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
  • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • Restart your iPhone and your watch:
    • Close open applications on your iPhone:
      • Double-click the Home button, and then drag upward on each Preview app to close.
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support

• How to freeze the first row in Microsoft Excel 2008 for MAC (worms. 12.3.6.)?

  Hello world

  I need to set the first row of a table in Excel 2008 for Mac. I know it should by a button, but don ' t have probably, or is hidden somewhere I checked the point of view, the tools and all the menu, I didn't find, y at - he someone to help me? Thank you

  Make sure you are in Normal mode, not Page view

  Go to the window in the menu bar and select freeze the panes

  Then you should be able to scroll through the sheet with line 1 has left in place.

  If you need for example three rows frozen, go to the fourth line and select freeze the panes.

  Then you should be able to scroll through the sheet with lines 1 to 3 from left in place.

• NB200 freezes the Toshiba start screen.

  Hello

  I have a NB200 - 11L which has been sitting with an annoying problem for a while now.
  When I turn on the laptop it freezes at the "Toshiba - leading innovation" the BIOS boot screen and goes no further.

  I get the same problem with or without food
  I tried replacing the HARD drive but still no problem.
  With no DISC in the system, it attempts to boot from the network & also allows me to access the BIOS (currently version 1.20)

  Anyone else had problems like this & successful to solve?

  Thanks in advance :)

  Chris

  A few days ago, I saw the same problem on my Satellite A205 (American model) friends. After removing the HARD drive, I was able to enter the BIOS settings.

  I ve value BIOS settings by default, the HARD drive has been replaced by a new and now everything works perfectly.

  HARD drive was defective, and obviously the identification by BIOS HARD drive blocked throughout the system.

  I recommend you get the new HARD drive and do the same thing.