Use of physical memory in Windows 7

Similar Questions

• How to reduce the use of physical memory 1 GB intel atom Win 7

  I have the Dell Insiporn Mini with the following specifications:

  1.66 ghz Intel Atom
  1 GB OF RAM
  HARD DRIVE 250 GB
  WINDOWS 7
  in the Task Manager always displays the physical memory usage about 50 to 70%. I don't have too much software installed on my laptop.
  Any body can help me to reduce the use of PHYSICAL memory...
  the use of the processor in the Task Manager is controlled to arnd 2-8%
  Thank you

  You must update your RAM to 2 GB...

  Go to Crucial.com.  This will tell you what you need...

  http://www.crucial.com/index.aspxhttp :// www.crucial.com/index.aspx

  And it will tell you how to do it...

  http://www.LapTopMag.com/advice/how-to/Dell-mini-RAM.aspx

• virtualization of material assistance and the use of physical memory

  workstation6.5 use any technology hardware support? In addition, the virtual machine uses all physical memory? I find there's a .vmem file that I think it's a kind of memory for the virtual machine file. It would be even better to use the memory of phsicial, or Don't matter? I used Microsoft VPC and VMWare is new to me.

  Thanks in advance

  llvc wrote:

  workstation6.5 use any technology hardware support?

  Yes. See products VMware and hardware support for virtualization (VT-x/AMD-V).

  In addition, the virtual machine uses all physical memory?

  Yes, indeed.

  I find there's a .vmem file that I think it's a kind of memory for the virtual machine file.

  This file contains the image of the memory of a suspended virtual machine.  When a virtual machine is suspended, it uses all of the physical memory.

• Blue error screen. Off frequently. Dumping physical memory. Windows 7

  I am owner of laptop HP Pavilion DV6 with built-in Windows 7 home premium.  Now its making a message blue screen & turn off (because I guess that his closing do not). Message is beginning "a problem has been detected and windows has shut down to prevent damage to your computer" complete "collection of data to disk dump.initializing crash for crash dump. The start date of the physical memory dump. Dumping physical memory. " Can someone help out me. This error make me boring.

  BKL

  These related to the ssudbus.sys Composite Device Driver (MSS Ver.3) DEVGURU Co., Ltd. (can be used by Samsung)...  It's pretty definite.  I re - install latest or remove if not required.  Given another driver from the OS crashed I would run a file system check and a scan of malware bytes

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.
  
  http://www.Malwarebytes.org/products
  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833

• Update Windows using too much memory in Windows XP

  In the last week I came across many computers where windows update is slowing down the computer because it uses over 400MB of ram.  This seems to affect Windows XP.  In the Task Manager wuauclt.exe and svchost.exe are the two files involved.  When Windows Update is disabled, everything is back to normal.  If you try to update Windows via the Windows Update Web site, there is no answer.  Please tell us what to do.

  Microsoft has acknowledged the problem-online http://social.answers.microsoft.com/Forums/en-US/xpperformance/thread/2e9bce71-788f-4f8a-bfed-bb713a300922/#d098eb64-7910-4f3c-9f64-2b82806193b6

  In the meantime, here is a workaround-online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ef18ff87-db7f-4705-8105-33dcf9a9a03b/#44e80262-9a91-4ddb-9770-63810962cb8c

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What is eating my physical memory?

  Even if I have total when the memory in the process tab, I get only 380 MB... So what else use my physical memory?

  My OS is Win Vista x 32

  

  On Wednesday, January 5, 2011 14:52:41 + 0000, Nehal J. Wani says:

  I have only 8MB of free memory. And only 319MB has been cached.,.

  Eager to minimize the amount of memory that Windows uses is a
  counterproductive desire. Windows is designed to use all, or almost, of
  your memory, all the time, and that's not bad. Free memory is
  waste of memory. Pay you for all that and should not want to see this
  wasted.

  Windows is working hard to find a use for all the memory that you have all the
  time. For example if your applications do not need some of them, it will use
  framework for caching, then give it back when your applications need later. In
  in this way Windows keeps all your memory works for you all the time.

  Ken Blake (MS-MVP)

• Too much physical memory used.

  Hi, am windows XP 32 - bit professional edition on machine A Dell G280 with Intel Pentium IV 2.80 Ghz, with 512 MB of Ram, out of which 10 MB, I think that is used for graphics VGA or maybe. Thing is my system uses too much physical memory even when no ongoing work on this subject... ND who, at the time, is going painfully slow. Is it possible that I can release the physical memory usage? I would like to do a update Avast Anti virus installed.

  with 512 MB of memory, you need to keep the programs that are not needed

  at the time where the value manual or value on only when you manually start them.

  do a disk cleanup regularly and Defrag the C; often drive.

  minimize Add-ons.

  maintain the programs that start when XP does a minimum or none, but keep the anti virus

  program to start with XP.

  If you have media players this auto-update automatically the value updated

  When manually update you them.

  Look in the Task Manager, how much process is running and set the columns (view).

  to show all related to memory. Find what is using a lot.

  Avast can use too or not.

  10 MB of graphics is not quite likely you have 32 or more.

  keep about 15% space free hard drive at all times or things can get real slow or not

  not work at all.

  the avast firewall maybe slowing down things or not.

  run chkdsk /f he can fix something.

  other people can respond with number and best thing to do.

  That's just my opinion and some things that I do.

• When I turn on my computer with windows xp on it I get a blue screen that says dumping physical memory

  When I turn on my desktop computer with windows xp on it I get a blue screen telling me that it is dumping physical memory.  Why it does this and what I can do to fix the problem?

  Hi KarenSellers,
   
   
  -What is the exact and complete verbatim of the error message that you receive? Thanks for mentioning the same thing with the error code that is displayed with the blue screen.
   

  Method 1: Try to start your computer in Mode safe mode and check if Windows loads successfully.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Check out this link to do the same thing:

  A description of the options to start in Windows XP Mode

  Method 2: Use the Windows Memory Diagnostic tool to check if there is an error with the memory.
   
  Refer to the section "using the Windows Memory Diagnostic tool" from the link given below for the same:
   
  How to troubleshoot the facilities of RAM

• Use of the high memory in Windows Vista

  I have a PC laptop Vista with 1 GB of RAM (I know I should get more!) that runs very slowly.

  The problem seems to be that the History graph to use physical memory in Task Manager shows continually near maxed out - usually 90% or more.

  No a process indicates an abnormally high consumption (SVCHost is the highest in 40 000 K with "show processes from all users' selected).

  I defragmented and run several scans of antimalware (analyzers Microsoft, Spybot, Malwarebytes, Superantispyware, etc.) and everything is displayed 100% clean.

  I've disabled Aero, transparency, the sidebar and disabled the services as Windows Search, Superfetch, Readyboost, and with little effect.

  I have run MSConfig and booted the system with everything off, and while the memory usage is a little lower, it is still very high.

  It's the analysis of PCPitstop which was done WITHOUT running programs other than Internet Explorer 7: "this system had a total memory load of 82% during the tests. This often indicates that more programs were running that could be managed by the RAM installed. »

  Here are the typical numbers in the Task Manager!

  (MB) physical

  Total 893

  452 cached

  Free 0

  (Mo) of core memory

  Total 240

  Paginated 188

  Paged 52

  System

  Handles 19405

  Threads 821

  Process of 72

  Page 1024M file / 2915M

  Physical memory 94%

  11% CPU utilization

  Here are the specs:

  Internet EXPLORER 7.0 browser

  System operating system Windows Vista Home Premium SP2

  Description of processor AMD Turion 64 X 2 Mobile Technology TL-60

  Number of processors 2

  Processor clock speed 2000 Mhz

  Description of the graph ATI Radeon X 1200 series

  Configuration of the memory 512 + 512; Unknown DIMM synchronous

  I would be very grateful for your suggestions!

  DG

  Darryl Gittins

  Vista is a memory hog. As you noted, you don't have enough RAM and he's never going to run smoothly with only 1 GB. Increase of at least 2 GB. You can also run the free process monitor utility to see what is eating your processor cycles.

  http://www.Microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• Why scvhost.exe uses 75% of the physical memory of my laptop?

  I noticed recently that scvhost.exe a host process for windows, use more than 75% of the physical memory of my computers, usually at about 106, 000 k, it's not normal that my system and it slows down my system, I regularly keep my PC, because I use it regularly at the College and put it on standby saves time as the stopping and starting of the system again Is there a version of the patch that will prevent scvhost.exe to use lots of physical memory.

  Thank you very much.

  Something more about this problem? Still facing this problem where svchost.exe takes too much memory. :(

  Edit: I deactivated "Generator Windows Audio endpoint" in services.msc and the problem disappeared. This servise is to control audio devices but I have a Realtek sound card and I installed the latest drivers for it and the sound works & speakers.
  Hope that helps anyone who has similar problems.
  Edit2: after as I restared, svchost.exe still using a lot of memory, but now it is linked with cscservise. Do not know what is happening right now. Anyone?
  Edit3: I did some research on the Internet and came up with this SuperFetch service. After you disable it in the Manager of tasks, svchost.exe became normal and he did not use this amount of memory. Also, I disable it in services.msc and I hope it will work as good as it was.
  Just do not know why this problem occurred, where. I didn't install anything recently except Battlefield 3.

• All of the physical memory used, but nothing in the Task Manager

  Hi I have windows 7 64 bit new installation as of yesterday (fully updated) and encounter a performance problem. When I look under task manager 95% of my physical memory (4 GB 3.5 GB) is used, but there is no task that uses memory. I chose to see the task for all users, and again nothing use the 3.5 GB of memory. It is a pretty clean install (auditor of virus and Skype, installed steam just) so no chance of a virus. I check my page file and it is set for the page file windows automatically scabies.

  I tried many things:-all service stop I can (no change)
  manually configure the paging file (no change)
  Reinstalled windows 7 (problem is finally once that all updates have been applied)

  Any help is greatly appreciated.

  Thank you

  I had the same problem and it is solved.

  a month ago my computer was sluggish and his memory was 77% either 93%, even though nothing was running. in the Task Manager for all the different processes added up to about 1.75 GB, so there was about 2 GB memory unexplained (4gig memory). I always ignored the 'show processes from all users"because im the only user on my computer, but decided to finally click i and a new process comes top of the list. Windows Media Player Network Sharing Service, this process itself was using 2 GB of memory. After completing the process, my memory returned to normal. However another thing you need to do is go to the resource monitor in the performance of the Manager section tasks and to suspend all processes of Window Media Player Network Sharing Service which are still open to slow things, and then set your very pretty.

  I realize that this is maybe not the exact answer to problem for everyone, but give it a shot.

• Windows 7 x 64 - physical memory dump blue screen

  I got the blue screen a few times now. It seems that the physical memory dump blue screen starts to appear after the last window update.
  Could someone help me please understand this?
  I have attached a link to the dmp files.
  https://SkyDrive.live.com/redir?RESID=FF2F42C35A4D3A3D! 141 & authkey =! AJvPvE7o7Z3rUmI
  Windows error:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 4105
  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800A734F60
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Files helping to describe the problem:
  C:\Windows\Minidump\041513-11824-01.dmp
  C:\Users\Yonsu_Kim\AppData\Local\Temp\WER-21060-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  Thank you.
  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.

  
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• Use of the Task Manager physical memory is not not to use processes

  I have seen this topic discussed it before, but I did not understand what is happening here.

  -J' have one windows server 2008 with 8 GB or ram configured, with the limit set to unlimited and booking made 8 GB.

  -When you look in the Task Manager, I see the physical memory to 88% and the bar bed to 7.10 GB.

  -Adding all process memory usage, it is only about 2 GB.

  -In another thread, that I read that it was because he had a deadline, and hot air balloon began.

  -J' I monitor the server via SNMP and have alerted all the time that this server joined more than 90% ram usage.

  -The Guest server is correct use of the physical memory Task Manager?

  -If it is not, and is caused by the ESX host, how can I fix it to properly monitor the comment server.

  

  

  The question here is how windows works,

  You reserve memory and don't have no limits, so there is no balloon showing VMs to appear that they have high memory use when they are not actually in some cases.

  Processes that Task Manager displays is not all that is running or being eaten, I know when working with SQL, you have FEAR that can use a ton on memory, but there is no process to show.

  Best thing to do is to run RAMMAP a sys internals tool that will show you exactly what is using the memory in windows.

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit