Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

Similar Questions

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• I accidentally hit the button to upgrade outlook and I can't understand how to remove it.

  Original title: HELP

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  You mean you use Hotmail, Messenger MSN or Windows Live mail via a web browser (Internet Explorer, Firefox, Chrome, etc.) and you have decided to try to "Outlook.com" (i.e. a product different from Outlook Express, Outlook 97, 98, 2000, 2002/XP, 2003, 2007, 2010 or 2013) and you do not like the look of it and the look and feel classic back?

  1. Click the "gear" settings in the upper right, near where your name appears
  2. Click on "return to Hotmail.

  For more information on Outlook.com consult this article:
  Update of Hotmail for Outlook.com
   
  Photo of what you do:
   
   
  If this isn't what you mean, please come back and clarify now that you know more information about what may assume people in light of what you have so far.

• I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away.

  I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away. I need to download the product and I may not know where to start.

  Ask someone to your school... You have a Cloud redemption code, or a number of series CS6?

  If cloud, http://helpx.adobe.com/x-productkb/global/redemption-code-help.html Redemption Code and

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  If CS6, download to other downloads and enter your serial number when prompted

  Once again, your 1 resource is your school

• Hotmail will not let me delete the account

  My hotmail account is sending spam messages. I went on the account to delete it asked to cancel all subscriptions and billing. I clicked on the link and he asked me to go check if msn has subscriptions, I did nothing. It will not let me delete my account, but he always tells me that I have subscriptions. I need to delete this account as soon as POSSIBLE. Does anyone else have this problem?

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• Will not let me choose the volume in the tab area of Notification

  My Mixer volume in the taskbar disappeared and now I can't access it. When I go to the properties of the taskbar and go to the notification tab he'd let me select volume that it is grey. My speakers are plugged in and turned on both power and computer and use to work before, so I do not understand what caused it.

  Maybe this article would provide a few ideas:

  Vista - Notification area - system icons
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• HP Deskjet 3520: 10 Windows will not let me block the update "ghost".

  I am running in the same question as 'has no updates nightly for Hewlett Packard Imaging NULL print HP Photosmart 6520 series' and 'I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop Window 7 error 80070490 o/s", when I run windows updates I get the message

  "He had problems installing the updates, but we will try again later. "If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imagery - print Null - series HP Deskjet 3520 - error 08024200 b ×".

  The solution to both of these post say is to disable the update is not tried to be applied, however, I use Windows 10 and it seems to be an option to ignore an update than previous versions of windows.

  What are 10 Windows users supposed to do when they are run this problem?

  Hello:

  As you know, Windows 10 has made it impossible to hide or ignore updates (or so it seems).

  I found this tool from Microsoft that allows you to hide updates that don't work, or mess up your PC if they work, (as a synaptics touchpad update has done on my laptop).

  https://support.Microsoft.com/en-us/KB/3073930

  I saved this tool on my PC for use in the future if necessary.

• Windows Vista, will not let me install the software! follow-up of the steps and nothing

  I tried to solve this problem for some time now with no results, I searched online and nothing. all the programs I try to install start and acts like it will install but never finished or shows me the error message. I turned to (UAC) and nothing. tried right click and run as administrator nothing.  just finished installation fix the beta program and once again no result. even allow me to install the updates as vista service pack 1 or 2 and yes I do ensure that the programs are vista compatible. the knowledgeable answers would be apreciated thx in advance.

  This error message you get?
  The problem just started recently?

  You can try a system restore to what installs worked: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  In addition, try the difficulty here: http://support.microsoft.com/mats/Program_Install_and_Uninstall

• 'Internet security options' will not let me install the Sims 3

  I bought the Sims 3 today and when I put it in my computer to install it, a saying 'unable to open these files. Your internet security settings prevented one or more files being opened. »

  I tried to adjust the internet options security to lowest setting, but it did not help. What can I do else?

  Thank you

  If your using windows firewall... goto Control Panel > windows firewall > change settings > DESACT.

  If using your firewall software, then it depends on where the settings to disable the firewall.

  Once the game has installed switch back on the firewall, this should allow the firewall to accept the sims 3, if not you will need to go into the settings of exceptions and add sims 3 for her.

• HP Photosmart c410a: new computer will not let me install the photosmart software... 'enable usb in BIOS '.

  What a waste.  Just bought a new computer with Windows7 Pro descktop installed.  Could not load the HP software by using the cd or download from HP. I get the message below.  New computer and all the usb ports work.

  ANYONE?

  Photosmart c410a

  NMR SDGOB-0826

  p/n is not found

  Thank you

  USB drivers "this computer has no USB software necessary support to allow for the completion of an installation of the USB." The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. To install this device as a USB device, see your computer documentation or the documentation of expansion card USB for more information on USB drivers. »

  A USB device "this computer does not have the necessary support of USB hardware enabled to allow for the completion of an installation of USB. The installation cannot continue until this is resolved.

  Action required: click Cancel to exit this software installation. In order to install this as a USB device, see your computer documentation or documentation for more information USB expansion card. If you are sure that your computer has the physical USB connectors, refer to the documentation on how to enable USB in the BIOS of your computer. »

  In fact his problem with the installation.

  Extract the exe file in a folder using 7zip

  Then delete usbready.exe

  And run setup.exe

  I had this exact error and solved with these exact steps on a new installation of windows with asus motherboard with all the usb ports on work.

  For some reason any the usbready.exe is just trash in some installations and does not correctly detect the usb ports.

  Edit: You can also follow these steps if you do not want / can not install 7zip

  From Windows Explorer type folder in the address bar and press ENTER.

  Locate and open the most recent HP installation folder, which begins with 7z (e.g. 7z1234a).

  Open the installation folder.

  Locate the file named usbready.exe, rename it to usbready1.exe or delete it.

  Go back up a level and start the Setup.exe program.

  Now follow the installation and check the differences.

• My small business SF 302-08 Switch will not let me apply the command "Routing".

  Hi everyone, my switch cisco small business SF 302-08 has the latest firmware and I want to activate the command routing, but it doesn't let me do that.

  I've read the reference guide for orders, do all this procedure: IP Routing Protocol independent commands starting at page 629, but nothing happens. I need this because I want a routing between VLANs

  Kind regards.

  Hi Felipe

  Look forward to hearing how you go.

  If you reset the factory default switch and the switch is NOT connected to a server, the switch restarts with a default IP 192.168.1.245 address according to the Quick start guide .  If your PC has a static address 192.168.1.2, you should be able to access the graphical interface of the switch.

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/sf30x_sg30x/Quick_Start/78-19252-01.PDF

  If the switch is connected to a DHCP server, the switch Gets an IP via DHCP.

  I've had problems using hyperterminal on my Windows 7 box, that I have overcome by restarting my PC in order to free the COM port.  Settings of the console are;

  • 115200 bits per second
  • 8 data bits
  • no parity
  • 1 stop bit
  • no flow control

  If you really have problems, and you think that the switch is faulty, you have the possibility to use the services of small business Support Center (HWC) in order to identify if the switch is good or bad.

  The URL that watch phone numbers are lower;

  www.Cisco.com/go/SBSC

  Best regards, Dave

• The device independent Postscript file will not let me choose the format of paper or output options

  I am trying to output separated PDFs from InDesign (Mac OS 10.8) CS6. My only output options are a laser printer that can actually produce 2 pages on a single document or a device independent postscript file for which all output options are grayed out.

  I used to do all of this from a previous version of InDesign using the plugin Adobe PDF as the PPD, with Acrobat Pro has been installed, but I have the latest version of Acrobat Pro, and that no longer works.

  (If you know ' why the PDF previously separated: the driver to press the company that prints our book was never able to determine its RIP settings to save me from this nonsense without end.)

  You can get the PPD 9 Adobe InDesign CS6 optionally print but not sure it will work on Mac 10.8, follow the below steps and then check: -.

  1. Quit InDesign.

  2. Navigate to/Applications/Adobe Indesign CS5/Presets /.
  3. In the Presets', folder create a file called PPDs (the name of the file is case-sensitive).

  4. Control-click on the following link and choose Save link under download the Acrobat 9 PPD:

     Acrobat 9 PPD

  5. Place a copy of the PPD downloaded into the folder created in step 3.

• Will not let me install the Intellegent background transfer Service

  I just started using my old Windows XP computer and I need to install updates, but every time I try to do that it says I have to install BITS. When I tried to install it it doesn't twice twice. First time I tried to install it on this site and the second time I downloaded from this site manually and tried to install it but nothing. When I tried to install it from this site, nothing happened, it doesn't tell me why the instillation 'fail' and when I tried to install that manually, he would start extract the files and then say "the file is corrupt. What is going on?

  I just started using my old Windows XP computer and I need to install updates, but every time I try to do that it says I have to install BITS. When I tried to install it it doesn't twice twice. First time I tried to install it on this site and the second time I downloaded from this site manually and tried to install it but nothing. When I tried to install it from this site, nothing happened, it doesn't tell me why the instillation 'fail' and when I tried to install that manually, he would start extract the files and then say "the file is corrupt. What is going on?

  William,

  This is the forum for Windows Vista update. Suggest that you post on the forum of Windows Update to get help:
  Windows Update

  Also, suggest that you include information about the level of Service Pack of XP, what security/antivirus suite is installed, and if a 3rd party firewall is used.
  MowGreen MVP Data Center Management - update of safety Consumer Services