visa for brooks 0154 driver
Hello
I'm looking for a driver for Visa for 0154 Brooks. I can even connect to the Rs232, with their program dde 'smart '!
It seems to be a visa driver for Hart, but for the MFC 5850 not for the 0154 controller. I don't want to control four MFC but just a 0154 controller which will deal with the MFC four attached to it.
Thanks for any help
N
Brooks 0154 controller requires a null modem for RS232 communication. Brooks has a Labview VI for the 0154
can be used to control the MFC5850. The labview VI can be used with the 0154 for controller control MFC 4.
nitad54448 wrote:
Hello
I'm looking for a driver for Visa for 0154 Brooks. I can even connect to the Rs232, with their program dde 'smart '!
It seems to be a visa driver for Hart, but for the MFC 5850 not for the 0154 controller. I don't want to control four MFC but just a 0154 controller which will deal with the MFC four attached to it.
Thanks for any help
N
Tags: NI Hardware
Similar Questions
-
The link to the labview for HP 35670 A screw is no longer valid and the same search returns nothing. Does anyone have the Labview VIs for this instrument?
The last message is in 2004 (see below)
The instrument for the HP 35670 A driver is only
supported under LabVIEW 6 and 7. You need to upgrade to the latest
version of LabVIEW to use the HP 35670 A driver or the
drivers newer than we release in the future.The instrument
Driver for HP 35670 A can be found on our website at
http://zone.NI.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/61f1c707c2f10906862568ab005fb9ff?OPE...Why don't you go to the Instrument Driver Network? I don't know what kind of research did you, but the driver is still available and can be found by using the search option here.
-
Pilot NI VISAS for Arduino Uno R3 configuration problem
Hello, my name is Leong. Currently, I have the problem with the configuration of the Driver NI-VISA for Arduino. Once I have downloaded the driver NI-VISA on the Web site of NOR, I NI-VISA drivers for operation and select the hardware bus type should I choose. After I selected the hardware bus type, the inviting of NI-VISA me to select the device ID I was installed, my device for Arduino UNO of R3 ID is USB\VID_2341 & PID_0043. I select my device ID and click the next button. I have the following button click, the screen is displayed as the following:
I chose to install the files generated on this computer and click Finish. When I click on finish, the error screen appears as below:
May I know what is the problem, so I know how to solve the problem? Thank you very much for your kind help.
Kind regards
Berre
do not use the device driver Wizard, simply select the serial port you need VISA
-
Disk Management screen 'Letters to lead change' grayed out for 2nd hard drive (IDE)
BIOS and Device Manager see and correctly identify the Western Digital 120 GB IDE hard drive that I installed as internal hard drive (with jumper put Slave) to my new desktop. Disk Management screen sees the drive, but it does not have a drive letter or volume: the central panel of this form, in the lower part, identifies it as disk 0, Basic, 111,79 GB and the brand as "Healthy (active, primary Partition). Even when I right click on it, the context menu is all gray with the exception of "Delete the Volume" and "Help". So I can't add a drive letter, and so I can't see the files on that disk. It was my main drive under Win XP SP3 and has a LOT of files I want to copy on my new computer. But my old computer is not bootable (except in Safe Mode, where I can see the files).
New office (bought this week) using Vista Home Premium 32 bit SP1, completely up-to-date with the Windows updates. No applications or other materials have been added. Boot disk is SATA.KenF8,
Of course, Vista does not see the volume. He sees a hard disk, but does not recognize the data in this regard. At this point, I would say are you will have to either return to the old computer and start in Safe Mode with network and try to copy the data over the network to the new computer, or copy data to a flash drive, external hard drive or DVD, or put the drive in an external enclosure that has either a USB or Firewire interface , so you can plug it into the computer as an external drive. There is still no guarantee, however, that Vista will be able to read the data on the same drive in an external enclosure.You could search the net for third-party disk utility for which will work for the IDE drive brand, you have. There are some on the market that can do amazing things with disks that have problems.
Let us know how you decide to go and if you need our help.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Get a Code 10 error "this device cannot start' for my optical drive
Hello
I am running a Dell Studio 540 with the following specifications:
Processor: Intel Q6600 @ 2.4 GHz
RAM: 4 GB
HD: 750 GB 7200 RPM SATA
Graphics card: nVidia 9800GT 512MB
OS: Windows Vista Home Premium 32-bit
All the drivers and BIOS are up-to-date.
My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:
This device cannot start. (Code 10)
Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".
I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.
Any help would be greatly appreciated.
Thank you for your time,
Donald Lundie
Hello
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/
You can run the fix in the below article data and check if this is useful.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
You can use a zip for time machine drive?
I know he said 'external hard drive', but do not know if this means that you can use a zip for time machine drive? (including so you can back up your entire OS, but also files)
Probably yes, but just wonder how to connect ZIP drive to your iMac.
-
Migration of data from Time Capsule for external hard drive
On previous posts, I received advice to use a single TC to buy a new one, with the intention to use them both as backups Time Machine for three different Mac. So right now, I have a 5th generation unique Time Capsule of my network that serves as a backup for three Macs drive. The older TC is still connected, but only until he ends the disc, which transfers to a 3 TB Western Digital My Passport Ultra HD, connected directly to the TC via USB to archiving.
The old TC is filled up to 1.99 TB, and I imagine that it would take a long period of time to archive and copy all of this info, but the process is already underway for more than 24 hours, and it always shows 1 day 0:31:59 is this normal? Do I have to cancel and try another method?
Shared experiences or advice will be appreciated.
See you soon!
BTW, I don't like the new layout of this post!
The old TC is filled up to 1.99 TB, and I imagine that it would take a long period of time to archive and copy all of this info, but the process is already underway for more than 24 hours, and it always shows 1 day 0:31:59 is this normal? Do I have to cancel and try another method?
Unfortunately, these can take a long time. I suggest that you let it run for at least 24 hours and then see where is the check-in process. So again, it doesn't show much progress later, let know us and we can provide you with possible options.
-
BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.
Changing the iTunes media folder location setting affects only where new additions to your library will be stored. To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:
The hold button SHIFT DOWN when you start iTunes and when you see this message:
Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.
For more information, see user turingtest2 on make a library of portable split. You must also acquire a 2nd external drive and allows create and maintain a backup your library.
-
The TOSHIBA for Bluetooth ACPI driver update failed
Hi all
I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.
When I tried to download the latest version of the driver it says that I have the latest version of the driver.
He also says that the device is functioning properly.It does not recognize my S4 where before he did.
I now can not get it to pair because he does not see.When I did the last update of MS that I noticed the results put BT update failed, as shown below.
Any ideas on a fix would be appreciated.
The TOSHIBA for Bluetooth ACPI driver update
Installation date: 08/08/2015-09:37
Installation status: failed
Error details: Code 80246005
Update type: recommendedThis driver has been provided by TOSHIBA for the support of Bluetooth ACPI
More information:
http://sysdev.Microsoft.com/support/default.aspxHelp and Support:
http://support.Microsoft.com/select/?target=hubBT is activated using the function keys?
What is the status of the Bluetooth technology in Device Manager?
You see errors, some yellow exclamation?What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
No doubt this has problem of BT -
Cannot install the drivers for the DVD drive on the Satellite X 200
Hello
Can anyone, please, help me? I could not install the driver for the dvd drive. I have vista ultimate 32 bit now, do a clean installation of which was preinstalled in my X 200 series new lappy.Almost all of the drivers had been installed successfully, but for dvd player she always ends up saying "this application cannot be installed on this computer. The installer is now abandoned. »
Can someone please help me, what could be the reason? And also if someone could provide a list of the software that was pre-installed in the lappy would be appreciated. Thank you
Concerning
SurajHi guys
I recommend you research a little in this forum rather than wait
The solutions have been posted already here:http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28963
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28538
Best regards
-
Satellite A200 - need driver for CD/DVD drive
Hey people.
Recently installed WXP Pro on my laptop A200 PSAEC, so I'm now in dual boot XP and Vista on my laptop.
Problem is that I have all the drivers doesn't work on XP and everything works perfectly, but when I tried to burn a DVD, Nero said the recorder cannot burn DVDs. In 'My Computer', the drive shows up as a DVD - RW drive, but when I insert a blank DVD, it says CD drive. The drive shows up as "TCSDcor" CD/DVGW TC - L6 #2D "" in Device Manager. I searched a driver, but it is impossible to find an exact match for this drive and there is no driver optical drive on this section of driver from the Toshiba site. The only thing I found is an executable file of the firmware upgrade, but it throws an error saying that it is the wrong drive.
Anyone got any ideas?
Any help would be greatly appreciated!Hello
You don't need a new driver for CD/DVD drive because it s a part of the operating system. So, you won't find one.
I think you should try to remove the upper and lower filters in the registry. I did the same thing a few days ago, if I also had problems with my CD/DVD player and it worked for me! :)
See this document from Microsoft:
http://support.Microsoft.com/kb/314060 -
Need to swap CD rom for Satellite 230CX drive
After hours of trawling the net, I still not found the part number for the swappable cdrom for Satellite 230CX drive.
Unfortunately some sites say it is the PA2659U / XM-1402, so I bought one on eBay, and it does not fit!Any help would be appreciated with the direct response or a pointer to a parts list.
See you soon.It s an oldie.
I put t find any information on this laptop.
But generally, it should be possible to order the part CD rom compatible and supported by the Toshiba service partner in your country. -
Should what format I use for my external drive for time machine? I have a WD 2 TB that is formatted for PC new drive. When I got to disk utilities to erase, and then reformat the options are
1 mac OS extended (journaled)
2 mac OS extended (journaled, encrypted)
3 mac OS Extended (respect for case-sensitive, journaled)
4 mac OS extended (case-sensitive, journaled, encrypted)
See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support
When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.
- If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
- If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).
-
I am looking for external hard drive for my MacBook Pro mid-2010
Hi all
I am looking for external hard drive for my MacBook Pro Mid 2010.
What is the best option for me? I heard of NAS hard drives and other things.
My HARD drive is not sufficient and complete fast when I visited files.
Thank you
What connections you have on your computer? USB3? Anything else?
What type of media you work?
-
I used Bootcamp to install Windows 10 and now it asks me for a boot drive?
I used Bootcamp to install Windows 10, then it turned off and when he started upward, he asks for a boot drive? I'm going back and this computer is not even a day old?
Dr. Alan
Welcome to Apple Support communities
Try holding the ALT key during start up your Mac to the top. This will make all bootable discs appear on the screen, so tell me what options you see here. Maybe the Windows installation is damaged or you have removed OS X by mistake.
Maybe you are looking for
-
I followed the instructions on how to export my favorites Firefox to a Bookmarks.htmlBUT it does not display all bookmarks in my bookmarks menu. I don't understand. I have Firefox 3.6.28.which is the latest I can install on my Mac PowerPC OS 10.4.11
-
Windows XP, both monitors. Mouse problem
When I move the monitor from left to right, I have to move from the upper right to the lower left corner. How can I change this behavior?
-
Error key Windows Ultimate Steal
I finished installing Windows Ultimate edition after purchase through the ultimate steal. Throughout the installation process, the product key worked, but now whenever I try to open any program (Office, Powerpoint, Excel, etc.). I am asked to enter t
-
loss of internet access after you download updates from microsoft
Last night, I got 21 microsoft updates and have been installed just before turning off my computer. This morning, I had no access to the internet and I had to restore the computer to the past with the help of the assistance service. Tonight as I wa
-
I got my cdkey msndaa through my college and installed on my laptop. I have recently sold this laptop and got a new (deleted windows before selling) and install it on my new laptop. Now it says windows can not activate.