loss of internet access after you download updates from microsoft
Last night, I got 21 microsoft updates and have been installed just before turning off my computer. This morning, I had no access to the internet and I had to restore the computer to the past with the help of the assistance service. Tonight as I was closing, I received the same 21 updates and I'm having the same problem. What can be done to prevent this
Try to avoid the installation of the hardware updates next time.
Hide the Windows 7 updates that you don ' t Want never to install
http://TechNet.Microsoft.com/en-us/magazine/ff382716.aspx
Tags: Windows
Similar Questions
-
I get an error code 4 [(2,7,800,40007)] after installing updates from 13/03/13. I restored the system (Windows 7) to a restore before 12 o'clock point and all is well.
Thank you
I added the updates one at a time and then restarted each time. Between each update, I also tested the scanning interface. At the time where all updates have been added to the scan function still worked. My guess is that the order of installation, or (more likely) the obligation to reboot between updates made the difference. I still have my wife updated so will update this when I do the update. Either way, I remember when I went from XP to Win7 in 2010 I had the same error, but that has been resolved by the HP driver updates.
-
Original title: when I grew my dell desktop computer up inspiron 530 and windows vista home it goes to a screen that wants to get me things I don't know what I have to enter secure mode or windows vista
I do not have ubdersand when my computor restars it goes to a black screen wants to enter or f8 for windows vista or press am I something wrong, after I check my restar updates too after that I think they are downloaded
Hi ISSYHenico,
1. you receive messages or error codes?
This problem can occur if updates failed to install.
2. are you able to boot into normal mode if you select Windows vista?
Method 1:
Step 1:
Otherwise, try to start in safe mode and perform a system restore and check:
Check out the link:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you can start in safe mode, then you can try a system restore to a previous point where you have not experienced the problem.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Once you're able boot in normal mode, try the following steps:
Method 2:
Step 1:
You can view the history of update for updates failed which is causing the problem.
Check out the link:
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
Step 2:
You can try to install the updates manually from the Microsoft Download Center download and check if it helps.
Check out the link:
http://www.Microsoft.com/downloads/en/default.aspx
Hope this information is useful.
-
Cannot restart the computer after downloading updates from Microsoft
I downloaded updates from microsofts and the next step was to who I checked ok restart.
The computer turns off and then tried to start, but stops and the error of reading a disk error has occurred.
Press Ctrl-Alt-Del to restart. It does not work. Cannot enter safe mode or use my cd XP pro disk. Need some help here.
Is it possible to start this computer from my laptop? My laptop using vista altimate. I can be reached at my e-mail address * address email is removed from the privacy *.Microsoft.public.windowsupdate discussions
They will help you in the above discussion group.
XP discussion groups:
Link above is to the XP newsgroups.
There is a list of groups of discussion XP to the bottom of the left column.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
-
Why can not download updates from Microsoft?
I have a laptop that is running Windows Vista and I was not able to install updates from Microsoft for a long time. As a first step, what he did but one day, after an update it just stopped working. It will always fail, and sometimes I get a message saying that he does not configure so it. I solved this problem temporarily but just manually download the update from the Microsoft site that works but as of lately, I'm getting loads of updates (like 30 at a time) and it's just too many things to be updated manually. Also, I'm running in the updates that were as different versions (like x 64 KB34567 or KB34567 ie43) and I don't know which one I need. I would really like it if my computer would download these updates on their own. Does anyone know how to fix this?
The update of Windows becomes boring because whenever I get the said I have a ton of important updates for Microsoft, but then I can't download them so he just keeps popping up.
You receive errors related to updates?
- Open Windows Update by clicking the Start button, all programs and then click Windows Update.
- In the left pane, click view update history.
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed - Find an update for Windows that has failed to install, and then double-click the update to view more information.
Updates that have failed to install will display failed under status, next to the name of update. - In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
- Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.
FOR INFO:
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058 -
Cannot download updates from Microsoft for Windows 7.
I made sure the firewall isn't interfering. neither my BitDefender antivirus software. any suggestions on where to find would be appreciated.
It is expected by M$, we must now jump through hoops to clean install.
http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/
If looking for updates to hang on a current installation,
Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.
4.5.2 is more consistent to have installed,
https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642
Switch your windows update setting to never check the updates temporarily
Restart the machine
You can try and install the latest client update manually let your update settings to never check for updates until you install it.
https://support.Microsoft.com/en-us/KB/3138612
Then you download this from your download folder run from there.
https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396
Download the x 86 for 32-bit or x 64 for 64-bit
Install it and restart when prompted too after he did a search of stand-alone for updates that should not
take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
updates before running from the downloads folder.
Once it installs and restarts
You can reset your updates affecting everything you had before default =...
Then check the updates manually.
I think that the solution came from Softpedia and Joel_CS posted on this thread,
http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml
You must scroll down for Joel SC post threads, it is the last answer on this page,
-
Disabled Internet access after you apply the updates of Windows
After you have installed the latest Windows updates, I lose all connection to the Internet. I can still see my network, but not do anything on the internet.
I spent an hour yesterday on the phone with my ISP check it was their system, not a hardware problem with my modem or router. I spend another 1/2 hour on the phone with Dell technical support.
It turns out the issue was my DNS has been altered, and the only way to recover was to perform a restore of the system for 8/16. Everything was going well after that... until Windows Update automatically ran last night, install the last two so-called critical updates. I don't know what is causing the problem, but my DNS was wiped out again, and I had again back 8/16 recovery point.
I disabled Windows Update for the moment because I don't know how else to solve the problem; in the absence of any change to my system, I suspect it's updates are something to my DNS. Does anyone else have this problem? Is there a better solution or another way to solve the issue that doesn't require me avoid all Windows updates in the foreseeable future? Is there a way to know if/when a later critical update solves the problem created by these?
The cause has now been identified as McAfee updates and no Windows updates - they were both released at the same time. If one of your PCs have McAfee so that they might be confusing your test results.
See the communication from this "criticism" - McAfee
You should make the fix McAfee, if necessary. The McAfee link applies to consumer products but there are corresponding communications for businesses - see, for example,.
Corporate KnowledgeBase - DAT-6807/6808 causing problems with VSE 8.8.x
I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as ads from McAfee have said since then, the application did not refer to his database of threats correctly [so, eventually, the variation in the degree of severity in the user experience]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].
I had to run the McAfee Development removal a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
- - - - - - - - - - - - -
If you do not have McAfee then Windows update that kb2705219 could be another cause that uninstalling that appeared to solve the problem for some users. But, personally, I think they could only reached a temporary fix [I thought my PC was OK at the time, but it turns out does not do the trick, as explained above] to uninstall an update - panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.
-
A friend becomes "Configuration failed, changes of recovery" after the download of the Windows updates.
His PC is running Vista, and the problems started after a period of 3 months when the computer was not in use.
Download updates (15 of them) successfully, but no 'Configure', and then she gets "Configuration Failed, recovery changes, do not turn off your computer.
Any help would be appreciated
Hello
Try the procedure described in the following article:
Step 1: Reset Windows Update components.
http://support.Microsoft.com/kb/971058
Step 2: The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358
-
Unable to connect to the internet after getting an update from Microsoft, Windows Vista Help
After getting an update Microsoft my computer will connect is the internet. All services are disabled. I didn't get the updates and restarted my computer. How can I get services running again. When I did an IPCONFIG command output and renew it says RPC server is unavailable.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
-
I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition. However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works. It's just a dead link. I can click on it, but nothing happens. Not even an ounce of trying to open. It's just 'died '. I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games? Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play. I am referring to the one in the Games folder, which is installed with Windows 7. I play this game almost every day, so I hope that it will be restored. I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...
Hi Kentuckywoman,
Welcome to the Microsoft Community Forums.
According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.
-What are the updates installed recently?
Method 1: I suggest you to perform system restore and see if it helps.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.
Step 1: Uninstall the game:
(a) go to Start and in the search type' features on or off Windows activate'.»»
(b) click on "turn Windows features on or off". ""
(c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.
(d) to restart the computer.
Step 2: Reinstall the game:
(a) go to Start and in the search type' features on or off Windows activate'.»»
(b) click on "turn Windows features on or off". ""
(c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.
(d) to restart the computer.
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
-
No Internet access after you have copied the user files on.
I created a new user account and copied all the files including documents and settings from an old user account. Before I did I unhid all hidden files and system files. What I was expecting, it was the new user account should behave exactly like the old user account without problem outside the difference between user account names.
However, after doing this I couldn't Internet new user even account I could ping all web Internet sites I've tried. Finally, I have to create another user account and copy only the document and manually I have to redo all the personal settings.
If the problems were gone. However, I would like to know if it is a problem to copy personal settings. What is the most efficient and effective way to transfer the account from one to the other?
Hello
Did you remove the following files on the new account?
- Ntuser.dat
- Ntuser.dat.log
- Ntuser.ini
http://support.Microsoft.com/kb/811151/en-GB
The link above shows how to copy a profile, however as far as the most effective way of copying, it depends on what you want, that is to say some parameters can be set for all users of the computer local strategies etc. If you want documents available to all users, use an all the "users share" with the permissions to prevent some accounts, editing files. This may or may not be what you want to achieve.
Please confirm what data/files/personal etc settings you want to duplicate to the new user accounts, and state what - this time when creating or on an ongoing basis.
Finally you use XP Home or Professional?
-
Cannot start Windows Vista after you download updates
Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect
Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start
Hiartco1993,
1. do you know what download you tried?
2. do you receive error messages or error codes?
3 have you tried booting in safe mode?
You can first try to start in safe mode and try a system restore and check if it helps.
Step 1:
You can try to start in safe mode.
Check out the link for more information on starting your computer in SafeMode below:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
You can try restoring the system to safe mode.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Problems after the automatic update from Microsoft Outlook
A
about having Microsoft automatic update, Outlook on Vista has stopped working properly. I can open the program, write an e-mail or two and may be able to send a mail, then the program freezes. It happened just after a update to day to day. How can I solve this problem without removing the new updates?
Automatic updates has also changed all of my Web pages. It's very upsetting. Why? Internet Explorer took over. What was wrong with me. I gave permission to the automatic updates program but does not reset my personal settings. How can I avoid this in the future?
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
http://answers.Microsoft.com/en-us/Office/ee861097.aspx
Outlook Help Forums at the link above.
They will help you with your Outlook questions when repost you in the Office Forums above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Windows Update Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Blue screen of death after running the update from microsoft.
Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:Dell Precision T7500 workstation
1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500
1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500
1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500
1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500
1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500
1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision
1 421-1993 Windows 7 Downgrade RLOB
1 430-3434 PCIe 10/100/1000 NETWORK CARD precision
1-313-7458 data DVD 16 x - ROM only Dell Precision TX500
1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB
1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude
1 power supply 330-3555 Precision T7500
1 330-3156 documentation, English, Dell Precision
1 power cord 330-3157, 125V, 2 M, C13, Dell Precision
1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500
1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500
1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500
1 shipping material of 330-3569 for system Dell Precision T7500
1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude
1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision
1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500
1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500
Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.
-
Can not download updates from microsoft
using xp... pk3 valid xp, tried to set for automatic installation through Control Panel but the response has been... Windows cannot find not "(null)... tried to download page to update Ms... told to download Active X. Said to click just below the address bar, but the menu does not install active X. Did not have notices of updates at all... help...
Reset Windows Update components:
http://support.Microsoft.com/kb/971058Good luck!
Maybe you are looking for
-
How can I know what power adapter is mine since we both have the same for macbook pro 2013?
I mixed my adapter upward with my friend and we both have the same adapter for macbook pro and mine is almost more recent than its adapter. I need to know how can I know who is mine?
-
Need to network for HP-15-af024AU controller
I use a HP laptop: HP-15-af024AU with operating system WIndows 7, 32-bit When I tried to install the realtek wireless network adapter
-
PHOTOSMART 5520 WILL NOT PRINT BLACK
I just replaced the cartridges for my PHOTOSMART 5520. After that, color printing has no black color. All HP cartridges are not new. It's very frustrating.
-
This printer is supported in windows 10?
-
Venue 11 Pro Ethernet Controller does not not at Gigabit speed
Hello I got a place 11 Pro 7130 with the office computer docking station. I'm having the same HDMI DVI issues that everyone else is having, however I have also another problem with him where I can't connect to the Gigabit speed network, even if it i