Visa resource unavailable, device to use my other program

Similar Questions

• Once I used internet I can't use any other program. I have to restart my computer to be able to use the computer again.

  I use internet often and everything works OK. After I log out, I can't use any other program in my computer, Google Earth, Microsoft Office, Microsoft Works, etc., the computer can not open any program. The only thing that works is the Start button, but no program works. Any suggestions will be greatly appreciated.

  Hello
   
  1. What is the error code displayed when programmes fail to open?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
  
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
   
  Note: please follow step 7 of the article mentioned above to start the computer normally, once completed the necessary troubleshooting.
   
  Method 2

  If you still encounter the same question please you start a computer in safe mode with network and check.

  
  

  Note: in case you have a wireless connection you will need to perform additional steps to connect to the in safe mode with network wireless internet.

  Start your computer in safe mode with network.

  
  

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3

  Scan you computer for infections.

  Microsoft resources and advice for the removal of malicious software and viruses (Microsoft Security Scanner)
   
  http://support.Microsoft.com/kb/2671662

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  I hope this helps.

• I have the creative cloud for $60 or anything like that, and I just want to downgrade using Adobe Premiere Pro.  I don't use any other programs and I don't want to pay for it

  I have the creative cloud for $60 or anything like that, and I just want to downgrade using Adobe Premiere Pro.  I don't use any other programs and I don't want to pay for it

  Please refer to:

  FAQ: How can I change to a different plan of the creative cloud?

• Font used for the Inbox Message unfortunately also used in other programs

  OK, so when you do a right click on the desktop, click Personalize, then window color and then finally advanced appearance settings, you can customize some parts in windows.

  

  So, I chose a font for the message, as shown above.  However, I noticed that the police appear in other places that I don't want it.  The olive colored arrows show where.

  

  

  

  How can I make the police appear to ONLY message boxes and not in other programs?   Thanks in advance for your help.

  Hello

  Thank you for using Microsoft Community.

  It is not possible to maintain a different font for other programs.

  Once we change the fonts in Windows color and appearance, it will be for all programs.

  It is not possible to apply a different font to other programs.
   
  This behavior is by design.

  Thank you

• You want to use a font that is on my computer and can be used in other programs, but will not appear in Photoshop elements 14.

  I downloaded fonts high voltage Rough and love him, want to use it.  Can use it in all other programs, but Photoshop.  It does not appear.  I uninstalled and reinstalled.  Any ideas for help?  Thank you!!!

  Look for the regular regular name on the list of 14 fonts pse.

  What is the police connection high voltage?

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• This device (graphics card), cannot find enough free resources that it can use. (Code 12) __NetBook ASPIRE ONE - display adapter resource conflict?

  This device (graphics card), cannot find enough free resources that it can use. (Code 12)
  NetBook ASPIRE ONE - display adapter resource conflict? Can't find the other conflicting H-washer? Graphics Intel Graphic Media Accelerator 3150.
  If you want to use this device (graphics card), you will need to disable one of the other devices on this system. I bought this camera 6 weeks, I can't get the maximum. Set-up for my graphics cards. 800 x 600-32 bit only. Please tell me what to do. And ASPIRE or Windows7 customer service phone #. Thank you.

  Hi athe43,

  Below I've listed the details of error Code 12 and the article with additional information:

  Code 12

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  Recommended resolution

  You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

  Turn off the device in conflict

  1. In the device properties dialog box, click the general tab.
  2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.
  3. Follow the resolution steps provided by the wizard to resolve the problem.

  http://support.Microsoft.com/kb/310123

  This article was originally for XP however the description still applies.  Also, please see the following article on the opening of the troubleshooter of hardware for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope that helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Compaq 6910 p: 6910p "this device cannot find enough free resources that it can use. (Code 12) »

  Under hardware and Sound/devices and printers, I have a yellow triangle with my 6910p icon.  Right click on the "hardware" tab States "this device cannot find enough free resources that it can use. (Code 12).

  I've recently upgraded the operating system to Windows 7 Professional.  Everything works ok but I show this yellow triangle where the devices are displayed.  When I look in Device Manager/Mobile Intel (r) 965, I get a window saying 'Problem detected with Mobile Intel (r) 965 Express Chipset Family'.   The next window States: "the device cannot find enough free resources that it can use. (Code 12).  If you want to use this device, you have to disable other devices on the system once".

  How can I go about doing so, the yellow triangle disappears?

  I tried to reinstall device Base system SP46972 and SP45738 of the video driver.

  Not sure if this is related, but I also have a black screen with a 1 in. border on the left and the right, which was not the case when Windows XP is the operating system.  I also need to solve this problem as well.  Searches on Google did not find the solution, so I hope someone can provide the answers to these two questions.

  

  Glad to hear that you would have recommended as the next step.  It has proved to be a challenge, but one that we have managed to find solutions for.    Thanks again for all your help and patients.     Carl

• Code 12 Mobile Intel (r) Express Chipset Family 995 cannot find enough free resources that it can use. Must disable another device.

  I know what this means, but do not know how to fix it!  What other device safely disable to make this work?  Any help will be appreciated.  Thank you!

  See this:

  Code 12: This device cannot find enough free resources that it can use
  http://TechNet.Microsoft.com/en-us/library/cc732199 (v = ws.10) .aspx

  Try running the Fixit mentioned on the link under "additional information."

  If this does not work, try this:

  Go to Device Manager, under the display adapter, double-click on your Mobile Intel (r) Express Chipset Family 995 to see its properties. Click on the 'Resources' tab, under "Conflicting device list" note the device in conflict. Look for the device in Device Manager, if its listed under "other devices" right click and uninstall the device. Alternatively, you can "update driver software... ' or 'Disable' the device.

  See the links in the reference below:
  Resolve conflicts the Windows Device Manager
  http://support.verizonwireless.com/CLC/devices/Knowledge_base.html?ID=48051

  Troubleshooting of conflict of devices with Device Manager
  http://support.Microsoft.com/kb/310126

  Resolve hardware conflicts
  http://www.annoyances.org/exec/show/article07-003

• Code 12: This device cannot find enough free resources that it can use

  Original title: Please help me with this error   The device information

  Name: Intel G41 Express Chipset ID: PCI\VEN_8086 & DEV_2E32 & SUBSYS_2E321849 & REV_03\3 & 11583659 & 0 & 10 Error code: 12

  Hi RoseLover,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Error code 12:

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause:

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  I suggest you download the latest drivers for the graphics drivers on the Intel site and see if the problem is resolved. Check the links below.

  http://www.Intel.com/support/chipsets/sb/CS-022768.htm

  http://www.Intel.com/support/graphics/detect.htm

  Apart from that, I suggest you to refer the below link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• The video device is currently in use. Close any other program that is using the device and try again.

  After starting cold, without other programs started using Windows 7 Home Premiun for a place in the upgrade, I am unable to capture video DV camera DV over USB.  The same setup work properly on Vista Home Premium.  (MM6)

  By using the menu "Import device", the dialog box "Import pictures and videos" identifies the camera as "Digital vidéo caméras Video Edit".

  After the error message out of Movie Maker and reboot, then try again translated by "importing video has already begun."

  Microsoft Windows Media Encoder 9 Series do not seem to be available for Windows 7.

• Realtek PCIe Gbe family controller works only with Code 12: this device cannot find enough free resources that it can use.

  Original title: Realtek PCIe Gbe family controller does not work

  so I can't access my internet so I use my phone... because ot said a (code 12). and "this device cannot fing enough free resources that it can use." and I don't know what I can and can not turn off so that it works... I also believe that he has stopped working after I said would be a windows update in June... someone help... ITA has windows 7. the model is a center of thinking lenova

  Lori

  I go to the Lenova support website and download and reinstall network controller (Realtek PCIe Gbe) drivers for you computer model.

  http://support.Lenovo.com/en_US/downloads/default.page?selector=expand

• How to extract data using bluetooth other device...

  Hi all

  First, I describe my problem:

  I want an application that extract the xml data in ECG device using bluetooth after accessing this data make some calculation and send it to the server... I am able to serach all the device compatible bluetooth after that, I am also able to connect from the particular device... (Now I use bluetooth Simple device as phone, pc or anything which is Bluetooth)

  Now the problem is... After connection of the device, I want to go get a (for example an image or text document.) file of the device connected using my camera...

  can anyone know how to extract data or file to another device that is currently associated with my camera... using BlackBerry device...

  Please help me to overcome this problem...

  Currently, I am working with Blackberry.6

  As suggested, I would recommend you try the samples provided.

• VISA-1073807343 error code when using ResourceManager.GetLocalManager (). FindResources (filter) to detect the map of Pickering PXI

  I'm upgrading our test system for Windows 7 and NI Developer Suite 2012 DS2 in Windows XP and NI Developer Suite 2008 4th quarter. I have a problem with the help of VISA to detect devices PXI of Pickering. The problem occurs with the next .NET NationalInstruments.VisaNS.ResourceManager.GetLocalManager () call. FindResources (filter). I use the filter "PXI? * INSTR.

  To trouble shoot this problem I was using the VISA program FindResources.2008 c# example. I get the following error message when you apply the "PXI? * INSTR"filter. "Where not enough information or the device or resource is not present in the system. VISA-1073807343 (0xBFFF0011), ErrorResourceNotFound error code.

  Looking at other markets, I infer that VISA is not find the maps. I came across the same error message when I tried to launch the "GPIB? * INSTR"filter however I determined that there was a problem with the NOR-488 driver. 2. after having repaired the driver of the FindResources.2008 program would find the GPIB instruments using the "GPIB? * INSTR"filter.

  Max the Pickering cards appear in "Devices and Interfaces" and are listed as follows:
  12: PCI Device 'PXI12::9:INSTR '.
  15: PCI Device 'PXI13::13:INSTR '.

  In XP, the cards have been identified as:
  PXI12::9:InStr (Pickering 40-785-522)
  PXI13::13:InStr (Pickering 40-780-522)

  Also Max for each device, I am able to open the Panel to Test VISA.

  Any ideas why the VISA is not able to detect these cards?

  Thank you

  I thought about it. Apparently I needed Windows 7 to install the driver for cards of Pickering. I guess the "PXI VPP / VISA drivers" supplied by Pickering Test would take care of this.

  Until Windows has installed the driver of Pickering cards have been listed as a PCI device under 'other devices '. After installation, the cards have been listed under "devices PXI of NI-VISA.

  MAX the card now are listed as:

  12: Pickering 40-785-522 'PXI12::9:INSTR '.
  15: Pickering 40-780-522 'PXI13::13:INSTR '.