VISA TCP/IP check if connected

Similar Questions

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• Cannot connect online casino - keep putting "check internet connection.

  Cannot connect online casino - keep putting "check internet connection" which is fine?

  original title: games

  "Online casino" might be likely to hundreds of web sites and services around the world.  Can you be more specific?

  -Have you contacted support for the web site in question yet?  They probably have some minimum requirements (plugins, etc.) that you need as well as most likely the troubleshooting suggestions of connectivity to their web site.  Believe me - they want your money. ;-)

  You can also - to install and try using a different browser.

  (If none of the above sounds like it would apply to you - it's because you need to clarify what it is you are trying to do and what you see and what it is that you have tried to remedy the problem yourself.)

• built-in photo editor called (photos) does not. It says "cannot load data.» Check your connection.

  Can someone please help, when I click on a photo to change and I chose the second Editor (photos), that it loads a bit, but then he said can not load data, check your connection. But it used to work before! and I am connected to wifi!

  Try to force stop the app and erase the data. It might be a little difficult because it does not find in the settings-applications-all. However, you should be able to open the app in app menu, then press home. After that, select recent application manager and longer tap on the pictures, you should get info app.

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Says Windows media player could not burn the disc check your connections

  Original title: Media Player

  I have a new computer with Windows Media Player so I decided to burn some DVD reviews ' and registered copies are hanging out and a box appears and says could not burn the disk check your connections etc. Please advised? Thanks for your help, I did everything and it could be a bad software here. I use windows 7.

  Hi George,.

  Welcome to the Microsoft community.

  It seems that you are facing problems when burning the DVD with Windows Media Player. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest to see the link and try to run the Troubleshooter:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. Let us know if you need more assistance.

• Optical drive not found. Check the connection of the disk.

  CD/DVD drive has suddenly stopped working.  I noticed when I tried to eject a CD of music. Convenience store initiated and clicked on CD/DVD playback. Read the message of the convenience store: "Windows did not detect an optical disc drive. It can be disconnected or disconnected. Check the connection of the drive, or connect the player. "All connections seem to be good. I tried to restart. Troubleshooting repeated with the same result. Device Manager displays a missing optical drive. Please notify.
  eMachines
  Model: EL1352G
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz

  This looks like a probable hardware failure.  See if the drive is seen in the BIOS.  If this is not the case, replace.

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• could not find a server reports and analysis hyperion running on localhost port 6800. Please check your connection string server and verify that the server is

  Hi all

  We have properly installed and configured Hyperion Reporting and analysis 11.1.2.4 in windows 2012 server however when I try to logint to the workspace, I get an error like "start-up of the specified document does not exist in the repository." "Select a new start under the General Preferences tab document" monitoring of "could not find a server reports and analysis hyperion running on localhost at port 6800. Please check your connection string server and verify that the server is up '.

  
  

  
  

  

  
  

  

  HyS9RaFramework_epmsystem2-syserr:

  GsmNotFound

  com.brio.one.services.globalservicemanager.GSMException: GsmNotFound

  at com.brio.one.services.globalservicemanager.GSMFactory.getGSM (unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory. < init >(Unknown Source)

  to com.brio.one.client.ClientFactory$ ClientFactoryInitializer.connect (unknown Source)

  at com.brio.one.client.ClientFactory.getClientFactoryConnect (unknown Source)

  at com.brio.one.client.ClientFactory.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSM (unknown Source)

  at com.brio.one.web.properties.ApplicationProperties.getDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.setDefaultGSMContext (unknown Source)

  at com.sqribe.WS.WSBaseServlet.initLogging (unknown Source)

  at com.sqribe.WS.WSBaseServlet.loadConfiguration (unknown Source)

  at com.sqribe.WS.WSBaseServlet.init (unknown Source)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)

  at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)

  to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)

  at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)

  at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)

  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  In the workspace, it shows that the Service is pending.

  

  EMP Diagnostic Report:

  

  Can help kindly out how should I solve this problem.

  I restarted the services and rebooted the Machine but still getting the same error.

  Kind regards

  VJ

  
  

  Hello

  I've reconfigured the Reporting, analysis, and everything by, I chose "Drop table" and the issue was resolved.

  Kind regards

  VJ

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine.

  I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?

  Hello

  Please try the steps in the following thread

  I have problems connecting to Business Catalyst Muse.  When I try to publish, I get a message saying his time trying to connect with my Adobe ID - and check the network connections.  All of my connections are very good... Muse is connected to my Adobe

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• VirtualCenter Server Service did not start due to a problem of DB. Check DB connectivity... success of trial

  Hi guys,.

  I met sudden VirtualCenter service stop due to the DB error. However, DB connectivity is very good I went to oracle odbc on my server and even tested... after that this vCenter service does not start. Please find the player below error message event. I have a few questions more than I've included after the error message.

  Event type: error

  Event source: VMware VirtualCenter Server

  Event category: no

  Event ID: 1000

  Date: 05/02/2009

  Time: 23:04:07

  User: n/a

  Computer: SRVVC10

  Description:

  The description for event ID (1000) in Source (VMware VirtualCenter Server) cannot be found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: an unrecoverable problem has occurred, stopping the service of VMware VirtualCenter. Check the connectivity of database before restarting. : Error [VdbODBCError]-(1) "ODBC error: (HY000) - [ODBC] [Ora] ORA-01653: unable to extend table VPX_OWNER.» 128 in tablespace VPX_DATA VPX_EVENT_ARG

  «is returned when you run the SQL statement "INSERT INTO VPX_EVENT_ARG (EVENT_ID, ARG_ID, ARG_TYPE, ARG_DATA, OBJ_TYPE, OBJ_NAME) VALUES (?,?,?,?,?,?)".»

  -

  ---

  Oracle is a good database for installing vCenter? What are the best practices related to Oracle hosting a metadata DB vCenter?

  I am only able to find best practices and tweaking SQL tips we do not have a strong environment of SQL and Oracle is relative to a highly available environment so that is recommended by the corporate security team and the team of DB

  Have you checked if there is disk space available on the DB server?

  Have you made changes to the VC or DB?

  What does the vpxd.log show?

• How to check the connection information?

  Hello
  
  I want to check the connection information to an application. Can anyone suggest how to on this subject?
  
  
  Thanks in advance,
  Annie

  Hello Annie,.

  Have you ever looked at the sight APEX_WORKSPACE_ACCESS_LOG? Is it what you need?

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Check the connections TCP &amp; UDP host through ACL

  Hello!

  I use ACL to control TCP UDP & connections pass through my router (C805 & C2500). I plan to control of the host, but after I have created a new ACL that and add it on IP Access-Group of my Serial interface, the acl that I add before who is used to control the connections TCP & UDP is removed because of an ACL. How can I handle this?

  What you have is a standard access list, which would block anything with the source 127.0.0.1 address and an access list more extended negates several types of traffic.

  To combine I would rewrite the access list standard as a broader access list:

  access-list 100 deny ip 127.0.0.1 host everything

  who deny packets whose source 127.0.0.1 address.

  I would put rewriting stated as first statement in the new list access followed by others which would give you this:

  Note 100 access list refuse the specific host

  access-list 100 deny ip 127.0.0.1 host everything

  Access-list 100 remark block number TCP and UDP ports

  access list 100 permit tcp any any eq www

  access-list 100 permit tcp a whole Workbench

  access-list 100 tcp refuse any any eq 135

  access-list 100 tcp refuse any any eq 445

  access-list 100 tcp refuse any any eq 593

  access-list 100 deny udp any any eq 135

  access-list 100 deny udp any any eq tftp

  access-list 100 deny udp any any eq netbios-ns

  access ip-list 100 permit a whole

  That should do it.

  HTH

  Rick