visible or invisible at run time

Similar Questions

• How to change the properties for some controls at run time?

  Hello

  I would like to change some properties for some controls in front of Panel at run time. Number of properties of the control I want to change is based on a newspaper user file opens in the final application.

  I've attached an example where I'm changing the visibility of digital controls. Problem I have I don't know what reference to connect to the property node in the case where the control loop for is not a digital control. The example is based on the label.text property but I could use the more generic classname property as well.

  Kind regards

  Petri

  Initially, a control has no legend.  It is not just the caption string is empty and the legend isn't visible, but the caption object does not exist.

  At the time of change, when a legend is on something other than an empty string, the object of legend is created.  If you redefine the legend with an empty string, the object of legend is deleted.

  During execution, the object of the legend cannot be created or destroyed, but if it exists, it can be changed.

  When I legends I want to change during execution, I initially affect the '. '.

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• Satellite A200 battery run time

  G ' Day, I have an A200 series PC laptop which is about 2 to 2.5 years, since the original battery died. I bought a new battery - one more (in other words, he had to last longer than the original). The new battery is not completely charged after charging for 6 hours, while the machine stops and only lasts 2 to 2.5 hours on battery. The power settings are balance and I especially don't work only with the word doc and sometimes the media player in the background.
  The original battery (small capacity) used to last 2-3 hours on these parameters.
  The manufacturer said tht, it may be a driver issue any.

  If anyone has had a similar dilemma, and there, anyone know how I could fix this problem apart from return to the manufacturer of the battery?

  Concerning
  Rgtom

  2.5 hour battery run time on the Satellite A200 is OK for me and it's the same as on my Satellite A300.
  I think 2.5 hours DURATION is just average for this model of laptop.

  Can you please tell us exactly what battery you bought?
  Can you send us exact Toshiba part number?

• deploy the run-time engine

  Hello everyone,

  I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

  Here's the problem I encounter while using the deployment tool.

  1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

  I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

  

  2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

  a. I have to "deploy" my variable library shared, even though my system is not an EVS?

  b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

  3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

  I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

  Yours,

  lhuckj

  (1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

  (2) I don't know

  3.

  Generally, I put my data link in a UDL file and include that in my distribution.  I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

  I have also included in my repertoire of the Application of TestStand CFg:

  TestStandDatabaseSchemas.ini

  TestExec.ini

  Users.ini

  StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

• I am too blind to find the download of the SP1 2015 Vision Development Module Run-Time?

  Research on ni.com for 'Vision Development Module Run-Time 2015' brings me to a lot of results, but not "Vision Development Module Run - Time 2015 SP1".  Is this product late?

  The Vision Development Module 2015 SP1 has already been published a few days ago.

  Hello Guenter

  I could not find, too and study this.

  As a solution for the moment, you can use the

  Vision Development Module 2015 SP1 - National Instruments
  http://www.NI.com/download/vision-development-module-2015-SP1/5798/en/

  and when asked to choose what features must be installed uncheck everything except the TERM NI Vision 2015 SP1, see the attached picture.

  Best regards

  Kathrin

  Certified LabVIEW Developer (CLD)

• VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

  Hi all

  I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

  I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

  
  

• LabVIEW RT and VeriStand run-time license

  Hello

  There is something, I want to clarify.

  VeriStand full development license includes a license to run LabVIEW RT?

  For example, if I intend to run on a desktop PC VeriStand became a target of RT, (as usual) should I buy a license of execution for LabVIEW RT or the run-time license is already included in the package VeriStand?

  I think we need to buy a license of execution in all cases, do you confirm?

  Thanks for your reply, have a good day.

  Kind regards

  After talking with the right people, I can confirm that the licenses Full Dev and operator agree indeed licensed LV RT Runtime (one per license NIVS). The license PC Dev has however not.

  Pardon confusion Da Helmut.

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

  I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

  I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

  Bob_Schor wrote:

  You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

  If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

  BS

  Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

  1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

  2. restart the PC

  3. open the project, close the project by choosing "save all".

  4. restart the PC

  5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

  6. restart the PC

  7. open the project, close the project by choosing "save all".

  8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

• How can I add a page control tab at run time?

  Hello

  I'm trying to add pages in the control tab in run mode, but I can't because it must be in edit mode.

  Here are the steps that I have:

  1. run the application.

  a. the application reads a txt file and it translated into a table with the number of rooms; [201, 202, 203, 204]

  b. the application takes this array and puts in place of the pages after how it is in the table and names must be the same as the numbers. (Now the program will start to collect information to fill the pages.

  c. the user can now change between pages. (Each page will have a table that will be updated with new information at run time)

  Is this possible or have you another solution?

  Grateful for answers.

  No, you cannot add pages, just as it is not really supported to add commands or the lights either (well, unless you plan to have always installed LabVIEW and not only the execution engine. If this is the case you can self-generate tabs etc. with VI Scripting pages).

  You can use an image control to "simulate" additional tabs, the orders or the lights, but normally it is possible to find a different and easier solution.

  In your case, it seems that all the pages have the same controls on them, it would be just the content that would change. So what you really want is a way to navigate between the 'rooms' availability You could add a list next to the tab control box, fill the list box with the availability of the rooms and the value of the list box to select the content to display on the tab of single page beside him, or you can use a menu drop-down. If you do not like these alternative presentations of the room options then you can generate the tabs in an image control and have a tab control page below which showed the content of the tab selected in the image control. That's a lot of work.

  Another option would be to create Let's say 10 pages in edit mode and then have the arrows under the control that allowed the user to navigate through the available rooms in groups of 10 (still is not really necessary to individual indicators on each page you don't need to make them on page... something to get this must simply move the indicators and controls on the tab control with the) arrow keys Cela will give you a black frame behind them, but in run mode, it will look as if they are on each page). In this way, you could have the appearance tab and navigation without having to simulate the tabs with an image control. The fact that many other graphical interfaces have such navigation of two levels means that the user will still find intuitive to use.

• ??? Insert the "NI LabVIEW Run-Time Engine 7.1.1.

  OK everyone, I'm "dead in the water" when launch LabVIEW 2014 SP1 after a long night of installing updates to Developer Suite 2014 DS2 SRL 2015 DS1 SRL

  

  Search Forum has this old thread

  http://forums.NI.com/T5/LabVIEW/error-1334-in-LabVIEW-run-time-engine-7-1-1-Setup-when-launching/TD-...

  Since 2008

  NOTE: at least its looking for a CD ROM is not a floppy disk!

  Hooray!

  I've recovered from that.  And Yes, I'll tell you how that you can do it yourself if this happens to you:

  From the control panel select programs and features, then National Instruments software.

  Scroll to "LabVIEW Run - Time Engine 7.1.1" and select Repair

  You will need the following:

  • Device drivers OR August 2014
  • C:\ProgramData\National Instruments\Update Service\Installers\NI_20150630_0736
  • NEITHER Developer Suite 2015 Encarta software
  • Patience

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• Deactivation of the Palette tools at run time

  I would use + on a control through one event structure at run time, but it's the shortcut that shows the tool palette.  Is there a way to delete the shortcut so that the tool palette only occurs at run time?  I already use "Run-time shortcut menu/Disable" setting on the control, as well as the generic "front panel window: allow the Run-time popup = F ' property.

  Build your application in a .exe and that you do not get the toolset on a right click.

• Vision Development Module run-time license?

  Hello everyone, I want to install an application to the University, I built on a laptop computer for use at another University. The application uses the driver NOR-IMAQdx for acquiring 2 USB, as well as various screw cameras since the vision development module. I know that there is no legal issue with Labview Run Time of distribution engine, but I would like to know where I stand with the side of the vision of the things. To install this application on the laptop I need to purchase the Vision Development Module Run Time License and software Acquisition of Vision for this laptop, if yes, how could I inculde it in installation? I noticed that the GUI installation gives me the possibility to include engines of execution and drivers, but I don't know how it works without the permit? Also, any idea on the cost? Any advice would be great, best regards, Joe

  Hey Joe,

  First the license covers the Module's development of Vision so should cover all the required drivers.

  You can download the runtime separately from here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:13, ssnav:sup.

  You will need the license to activate it on the installation.

  Whether if it is a better idea completely, it depends on how you want to distribute your application.

  I hope this helps!