Vista and all-in-one
I just got a new Dell PC which has vista. My printer is a hp 1610 all-in-one I've used with xp home edition. When I put the disc to load on my new computer it says that my system does not meet the minimum requirements to install this program and I can't use the 'run as' I don't know enough about computer systems so that it can accept my printer. Your contribution is appreciated! Steve
Please try this:
1. disconnect the USB cable to the back of the printer if you have already connected the printer to your computer.
2 download the software on the site by clicking HERE
3. save it to your desktop and after that is done, just run the program.
4. follow the remainder of the on-screen instructions and connect the usb cable when prompted.
Let me know if this helps.
Tags: HP Printers
Similar Questions
-
Vista and all applications of Toshiba on the recovery disk?
Hello everyone
I have problem with recovery disk on my laptop.
When I had formatted my HDD I lost my recovery and I can't return it.
That is why I need order of Toshiba backup recovery, but I have a question about it.Could you please give me some information?
Are my lost Windows Vista and applications Toshiba on backup recovery?I thank very you much for the replies.
Hello
The Toshiba Recovery disk contains your laptop factory settings. This means that the operating system (in your case, Windows Vista) and all the drivers Toshiba and tools. It s like you started the laptop first time.
In addition, the disc contains a picture of the factory settings and compared to a Microsoft disk you save a lot of time because already installed updates to Windows and all the drivers and tools you need to work properly for laptop.I hope I could help a bit to understand.
If you have any other questions, please let us know! :)Good bye
-
Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers
Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download
* original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.
Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.
Installation, configuration, etc. info at the link above.
For any other questions about your printer, contact HP:
http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en
See you soon.
Mick Murphy - Microsoft partner
-
Can not download vista 6210 all-in-one driver of lysozyme Pack Web site
Hello - I tried to download the full software functionality for my 6210 all in one of dozens of times and the hp site keeps popping up an error message when I try to download it. I tried both Vista and 64 bit Vista page.
Web site: 10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?os=2093&softwareitem=mp-47767-1&lc=en&cc=us&dlc=en&product=421991&lang=en
Error message: 550 /pub/softlib/software8/COL18486/mp-47767-1/AIO_CDB_Full_Non-Network_enu.exe: no such file or directory.
If someone can look into this? I tried to download it via Explorer and Firefox and no luck with both.
Thank you
Hello, it looks that the download page is back in business. I found the file and started to load it without problem. Here is the link... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47767-2&LC=en&DLC=en&cc=us&product=421991&OS=2093&lang=en
-
Lion and all-in - one 7180: unable to print double-sided and colourless
Hello!
I have a HP all-in-one printer 7180 as ist almost five years. It has served me well. Using a PC, I liked print prints front and black/white, saving paper and colorink.
My daughter bought a MacBook Pro with Leopard OS last year. We failed to find out how it can print double-sided and with only black ink. The parameters of this seems to be missing.
Recently, we bought two more MacBook Pro in our family. The two OS Lion rund. I managed to print from them, but not duplex and not using only black ink.
Is it possible, and can someone please tell me how?
Best regards, Bjoer
Hi again Bjoern
After checking, just to correct the duplex option will be available in the menu layout unter.
Simply click Copies & Pages and page layout
There, you will see the duplex option.
-
problem Windows Vista/HP All In One scanner
I can scan a document from the HP Control Panel in word without problem. When I scan from the HP Solution Center software, the preview ended, but the document is only half there as a file. I tried to change all sorts of settings without result.
All good leads to put me on the right track?I changed a JPEG image to a TIFF, resolution of 200 to 300 image, and all of a sudden, everything is ok again. Fact no sense to me, but it works now!
-
I was stupid and cleaned my registry and removed something I shouldn't... after other attempts to repair it failed, now I have to just start over with a clean reinstall of my OS (Windows Vista 32-bit). I have a Western Digital external hard drive "My Book Essential" which has ALL my photos and if saved documents.
Because I have to reinstall after PS Elements 9 install the Vista clean, what happens when I transfer all my pictures to the computer? They will still organize common sense in the Organizer (i.e. same subcategories, etc.)? In other words, was the info for tags and categories written permanently to each photo and will be automatically read by the program Elements 9?
I have almost 40 000 photos that were all organized so wonderfully... I'd be devastated if I had to start over. :-( I hope someone has some good news for me!
Thank you!!
Just use Backup and Restore. This Adobe document for more details see (even if it was written for PSE6, procedures remain the same):
http://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html
Ken
-
OS Vista C7280 all-in-one stuck
My C7280 is stuck in "loading of the paper in the main tray" and will not go further. I have topped up on the set and reset the printer by using information from the card, but nothing worked. Suggestions?
Hi Jkcone1,
Follow the steps below
1. remove the paper and office supplies all of the ink from the printer
2. While the printer is powered on remove the power cable at the back of the printer.
3. wait 1 to 3 minutes before plugging the printer back in.
Note: Make sure that you have the power plugged directly into the wall.
4. wait for the printer to ask you to reinstall the supply of ink and paper
You can also find the document below useful. Let me know what you find?
Out of paper"Error Message and the printer is not looking upwards or the paper feed
-
I find the minidump files and tried opening them and could not. Files and downloaded programs of debugging appear in the program. When I try to open them I get "you must be an administrator to open" insofar as I know that I am the administrator because supposedly everything I need is another administrator account. Also my restore will pass in a few days, and the box is no longer available. Also had an error on my printer files so I removed them, but as I (after) that I pressed the firm PC, the blue screen appeared and had to turn it off manually and of course got the minidump error message when I started again. If at this point, I'm still waiting to see if deleting the files printer helped. Any information would be appreciated.
OK, I'll look for your next post with minidump files.
-
My HP Officejet J3680 all-in-One printer prints sometimes and then stops.
original title: my HP Officejet J3680 all-in-One printer prints sometimes and then stops. What should I do?
My printer was out of paper before I have had already sent a message to print. Bllinked, meaning light that he was in the paper. However, when I added the paper it has stopped printing all together. This has happened on various acassions. My printer, HP Officejet J3680 all-in-One, has only six months. In addition, it only prints a copy at once, although I ask several copies. What should I do?
You can see in the Forum of Support HP
HP printers and all-in-one
http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjetAlso have a look at these tutorials:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsThe tutorial consists of 3 parts:
Step 1:
Check the hardware
Step 2: Use a troubleshooting tool
Step 3: Update driversApplication Microsoft Support Fix It:
http://support.Microsoft.com/mats/printing_problems/en-usTry this Windows tutorials:
It consists of many themes that you can click and read the tutorials.
There also an Fix It application
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsHere is the main link with: Support for Windows
Technical problems of Vista and troubleshooting - printing
http://support.Microsoft.com/ph/11732#tab11 -
Windows 8 Solutions for Laserjet, MFP printers, all-in-One and Scanjets
To help customers to use their products with Windows 8 successfully, HP has identified the drivers recommended by product. Please see the following support documents for more information:LaserJet - printers, multifunction and all-in-one devices supported in Windows 8
LaserJet and Color LaserJet - produced with care delayed in Windows 8
ScanJet - Scanners supported in Windows 8
LaserJet and Color LaserJet - printers, taken in charge or with limited Windows 8 Support
LaserJet Color LaserJet and LaserJet AiOs/Multifunction - products not supported in Windows 8
If you have a problem with the installation of your printer from Windows 8, please start a new thread and include your printer in the title of your post. Please, do not respond to this post. As new help documents are available, they will be posted on this subject.
If the resources above do not meet your needs/questions or you need additional assistance, please visit:
Additional resources that are available to help customers with their LaserJet printers, multifunction and all-in-one include:
-
Epson Stylus Photo PX830FWD all-in-One Printer
I'm looking for deacheter a new A3 printer and like the look of the
Epson Stylus PX830FWD
The literature indicates that the automatic connection is compatible with Windws 7.
This means my PC under Windows XP does not support this printer at all?
I'm not really bothered about the automatic wireless connection - I'm glad she's
cable connected to my PC.
Can you help me?
Thank you very much.
Danuta
Hello
According to the pilot of link on the Epson site taking the above printer has drivers for the following versions of Windows:
Windows XP 32-bit, Windows 2000, Windows XP 64-bit, Windows Vista 32 - bit, Windows Vista 64 - bit, Windows 7 64 - bit, Windows 7 32-bit
-
Question of B550 Wireless all-in-One
So I'm a happy owner of ideacentre B550 that came with windows preinstalled 8.1. After using it for awhile, I switched to linux due to some work stuff, then completely uninstalled victory 8.1. Now, I just installed windows 7 x 64 and had some problems with the drivers. A lot of things lies in my device manager is marked under "other devices", however, no wireless adapter. I have not found driver WAN to windows 7 either - so what should I do? Looks like connection via ethernet is the only legitimate way?
Good day and welcome to the community.
Please take a look at your support pages to find available drivers:
I hope this helps a little.
Kind regards.
-
print allignment page all-in-one HP PSC 2400 turns off the printer features
After changing the ink, trys to printer to run printerr allignment. It feeds the paper to halfway through, then hangs up with all the flashing lights. I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.
After changing the ink, trys to printer to run printerr allignment. It feeds the paper to halfway through, then hangs up with all the flashing lights. I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.
Hello
You can get a faster solution on the Support Forums of HP printer.
Here is a link for your convenience.
Printers and all-in-one - HP Support Forum's:
http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjetSelect the appropriate forum for your device.
Concerning
-
Where is the USB port on the printer 4500 hp envy all-in-one
Where is the USB port on the printer 4500 hp envy all-in-one
So the question for your answer:
Compatible products for:
HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550 And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...
For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response
All the best...
Maybe you are looking for
-
Hello Is it possible to link the gmail account directly in the Universal Inbox without creating a new email account? The only way I found to bind is to create a new e-mail to my gmail account in the AppMenu > accounts. What to do if I already have fo
-
Epson sx438w does not recognize the new ink cartridge
Epson sx438w does not recognize the new ink cartridge, when change original are
-
Is it possible for someone to monitor my Hotmail account?
I am currently in dispute with a company, and am involved in legal proceedings. I'm very suspicious that my Hotmail is read by someone else. Communication between me and my lawyer is discussed by third parties.
-
Lost my product key and the disc
I have formatted my HDD accidentallly while installing ubuntu 14.04LTS. When I realized it was already at the end of my windows 7 partition was gone with all my data and the worst, it's that I lost my installation disc. I still had my key at this tim
-
Can't rip CD on Windows media Player
Hello, I'm using Windows Media Player to rip a Cd. This is my Cd I paid for it. When I insert the Cd in the tray it should automatically pick the Cd and find the 'Album' info when I right click on the Cd icon and select "find album info". This isn't.