Vista boot from the external drive

Similar Questions

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg

• OS to boot from the external drive

  So I searched high and low, and I don't know if the Toshiba Satillite are able to start an operating system on an external hard drive. I discovered that there are portable computers that can do but their BIOS must beable to do. If Toshiba laptops can do those who can?

  Hello

  As far as I know it of not possible to boot from the external USB HDD.
  I found several postings on similar themes and it seems that it is only possible to boot from the external USB FDD, HDD, ODD and LAN are sometimes also PCMCIA card.

• Boot from the external drive via eSATA

  Hi all
  I have an external drive which I'm currently starting as a USB device.  The outside also has an eSATA port that I want to be able to boot from. However, when I go into the bios boot area to choose the boot order, there is no option to start using eSATA, USB only.  The Port of the computer's eSATA/USB port.
  This is so my question, how can I get the bios boot option to be able to select an eSATA?
  Thanks for the help

  From what I can find, HP didn't include the option to boot from the port eSATA on this computer.

  Many others have asked about this on the HP forum.

  I would check with HP support, however, since it is the BIOS that must support this function.

  Windows cannot change it.

  See this thread.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/booting-from-eSATA-HDD/TD-p/140211

• Vista boot from the external HARD drive when 7 is installed on the internal HARD disk

  I had windows Vista pre-installed on my HP laptop, now I installed the new hard drive and downloaded windows 7 on it. and I use my drive HARD back as my external storage medium and it came with vista pre-installed. is it possible to start fromUSB and use vista alternately without remove current HDD with 7 and keep their replacement on a vice versa. I already changed the boot order, but it shows the blue screen and then goes out... help me if you think you have the solution for me...

  Hello

   
  You can not install Windows vista on a USB hard drive. The reason is that manager (Bootmgr) boot will always be on the internal hard drive and will not read the USB drive letter properly and it continues to change.
  However, you can install the two HDD internally, and then you can have a dual boot option by adding the entries in startup of the operating system Windows Vista, Startup Manager (boot mgr).
  You can check the following thread:
   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/dual-boot-with-two-hard-drives-one-with-Windows-7/7e27ef71-e093-441F-AC97-ffd212c20368

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Portege R100 - boot from the external HARD drive

  I have a Portege R100 and the HARD drive has failed. I installed a new HARD drive and I have the Toshiba recovery disks. I tried to boot from a generic USB CD-ROM but the laptop did not recognize.

  I have a disk of Toshiba USB drive it does not recognize and I have a restore disc but I don't know how from there. Do I have to buy a CD external Toshiba and if so, which?
  Any useful suggestions?

  Hello

  Boot from the external USB CD/DVD drive is not possible.
  You will also be able to boot from USB HDD!

  If you want to boot from the CD, you must use a compatible PCMCIA cards (16-bit and 32-bit Cardbus) CD/DVD drive.

  For more information, see this article from Toshiba:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  and this other thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=97343𗰿
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  Good bye

• My iMac can boot from an external drive?

  Hello

  I have an iMac 21.5 "Mid 2010 which starts to show its age with slowness. However, I plan to upgrade the Basic 4 GB of Ram either 8 GB or 16 GB of Ram, depending on price... and my main question.  I know that the Mac came initially with a 500 GB hard drive and I would also like to upgrade to an SSD because they make a world of difference from what I've heard, but I don't have the level of skill tech to do the steps together 20-30. I wonder, as I have a 1 TB USB SSD externally, if I could install a new version of Mac OS X on the SSD USB and then set it as my boot drive and just keep still plugged. Would this work or startup disk must be internal rather than external via USB?

  Your iMac can be set to boot from an external drive. Just install OS X on the SSD and SSD drive as your boot disk in System-> startup disk Preferences.

• Boot from the 2nd drive HARD modular bay adapter (satellite P20)

  Hello

  I have a SP20-102 and I replaced the stock model with a 120 GB Seagate HDD and moved the original disc in a Module Bay HDD adapter.

  Is it possible to configure things so I can choose which HARD drive to boot from at the start, i.e. it is by default on the internal HARD drive but I can't choose to boot from the HARD drive in the modular Bay?

  I tried pressing F12 to boot device selection screen, but am unable to choose the 2nd HARD drive.

  Any ideas?

  R.

  Hello Robin

  As far as I know that it is not possible to boot from the external HARD drive. It is not supported.

  Good bye

• Boot from the DVD drive on a compaq evo N610C

  Hello everyone, I try to start my computer from the CD/DVD with success.

  I use a win98 boot CD, is this OK? Or do I need another type of boot cd?

  I checked the CD on other computers, and there it works fine.

  Hoping for help

  P.S. This thread was moved from the business PCs - Compaq, Elite, Pro for PC - portable Omnibooks, EVO. -Forum moderator hp

  WL37 wrote:
  

  It's one of the problems, the bios, the parameter does not have the ability to boot from the CD/DVD.

  There are only three choices:

  start from laptop, multibay

  boot from the hard drive to laptop or computer ethernet startup.

  I also have uppdated the bios, but nothing changes.

  'Notebook multibay shoes' should work - the CD is installed in the multi-baies slot.

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Satellite 5100 503: unable to boot from the CD drive

  Hey all,.

  I have a HUGE problem with my 5100-503 Satellite.

  Windows XP connects and then it disconnects right away.

  I found a fix for this at: [url] http://www.mcse.ms/message616432.html {/ url}

  The problem is that I can not boot from a cd, because the BIOS is configured to boot from the hard drive first.

  I get into the BIOS. I read on a few websites on the net than on machines 5xxx Satellite, you can only enter the bios through windows! ..., BUT windows does not work so I can't enter the bios. I can't even use the Windows installation CD when I boot, because once again the HD is set to boot first.

  When I press ESC while turning on the laptop and then press F1, I have the option load default BIOS values. I did, but the HD is still set to start first!

  What I can do... I can't reinstall windows or get into regedit to fix the paper / log problem!

  Help!

  Hi Jamie,

  Normally, you can select a boot device selection menu when you turn on your laptop. You can do this by holding down the F12 key when you turn on. Hold it down until the phone beeps or the device selection menu appears.

  If this does not work then you can try the shortened Toshiba habit that is to hold the 'C' button in the power that would then cause the laptop to boot from the CD drive. Of course, there must be a bootable CD inserted first.

  Kind regards

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• boot from the flash drive on a dimension 3000

  XPSP3, completely up to date, 3000 dell dimension

  I have booted from the flash drive once a long time ago and I have still now because my cd player is not good according to imgburn and dell did not buy, I looked. :)

  The only question about it in my search for this forum was 10 years ago, and the op had no satisfaction.

  I took action: drive startup laptop computer (dell), so that's good, will load files on the 3000 and then reach the point Windows starts up, and then I get a blue screen 07 b, any file in the list, just telling me to uninstall a driver or a controller, I have not installed one, :)

  any ideas?

  INSTALL full XP on USB flash as boot drive is not supported.

  Hirens is WINPE no full XP.  XP is not and is not supported as a boot USB and run all option.

  You need to do a real hard drive your boot drive.