Vista does not load says lack file \windows\system32\winload.exe

Similar Questions

• lack file \windows\system32\winload.exe

  try to find a missing file, so I can start my computer, the file is \windows\system32\winload.exe

  original title: I need to know about a lack of file how do I start my PC it is \windows\system32\winload.exe how to do this when my computer starts

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

  I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

  I have the drive, it won't start him.  I got the diagnostic tool memory to run.

  What should I do?

  See the Divine Logix post on this thread if it helps:

  Winload.exe is missing or damaged (no it isn't!)
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Why Windows Vista does not load user profile?

  When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

  Hi James,

  1. When you created a new user account, have you configured it as an administrator?

  2. When you connect to the old user profile you are able to view your data?

  You can check out the following link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  The above link contains third party links.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please consult the following link:

  Troubleshoot "access denied" when opening files or folders

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Urgent - Vista does not load

  OK, I guess I better start from the beginning. My computer came with Vista and I installed Xp with it only to remove it later. Once I took it off I tried to delete the windows startup menu, because he still had listed XP. I read on a website that I had to remove the c:\boot directory and this should solve the problem. Now vista does not load. It says "missing system32\hal.dll"

  I have the HP recovery disk, but I would lose all data. I have a copy of Vista, but it does not seem to be initiated. I can't cross the screen with the error message. Can anyone help?

  Hello

  Download Windows Vista Recovery Disc to correct and choose repair system.

• acerEXTEND does not load on the computer (Windows 7)

  acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

  Good to hear it!

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk