Vista & error 57 on downloads

Similar Questions

• I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors.

  problems with windows install

  I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors. They are as follows...

  "There is a problem with the windows package install." A script required for this install to complete could not be run. Contact your personal support provider or the package. »

  Then when I click OK, this error comes in... "It seems you have an incomplete or corrupt installation. Please use Add/Remove programs to uninstall the previous version. »

  I don't have a previous version of flipshare on the computer, I deleted it and it isn't on the list of programs.

  I have installed all updates.

  I got a support to scan the computer and got a Windows Resource Protection found corrupt files but was unable to solve some of them.

  Does anyone have suggestions as how to do to solve this problem?

  I downloaded Speedy PC Pro in the hope that they could help and he did not. They resumed even remotly and could not understand it :(

  Any help? :(

  Jennifer

  Hi Jennifer,.

  Follow the steps in the article.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• Vista - Error Code: 0X8000FFFF (cannot install updates)

  See title - will not download them updates.

  Windows Vista - Home Basic Version 6 - Service pack 1

  Do you have a 0x8000ffff error message

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF

  http://support.Microsoft.com/kb/946414/en-us

• How can I stop Vista Service Pack 1 download... its stuck at 83% and clicking stop installation does not work

  How can I stop Vista Service Pack 1 download?  I tried to download the service pack one and its deadlock in 83%...after 5 hours I hit stop installation, but it just gray out and don't stop - I'm afraid to restart because don't know what will happen.  Help, please... I think that probably Norton it stopped completely download so I'm cutting of norton, but nothing is happening because I think that the serivce pack is stuck in the loop.  Any advice would be greatly apprecaited.  Can I reboot? Can I go back to a restore point?  Thank you

  Hello

  This problem may be due to Norton or other software. You can restart the computer and check. If all goes well, you should be able to boot to the desktop without any problem.
  The error message in the event viewer can point to the program which caused this problem.

  Reference:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in the event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can download the latest service pack using the article below and verify if you are able to install it.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

• Windows Vista: Error 8000FFFF when checking for updates

  error code 8000ffff

  original thread: 8000FFFF error code when I try to check for upgrades to vista 32

  http://support.Microsoft.com/kb/946414

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF

  To resolve this issue, try the following methods in the order that they are listed.

  Back to top

  Method 1: Restart your computer and then try to install the updates

  Close all programs that are running, restart your computer and then try to install the updates.

  Note Restarting the computer will ensure that all previous installations are completed and there is no remaining processes that require a system restart until they can be performed.

  If the problem is not resolved, go to method 2.

  Back to top

  Method 2: Save and then delete the registry keys that may cause the problem

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To use the registry editor to back up and then delete the registry values listed in the "Error Description" section, follow these steps.

  Note These steps are known for this problem that is described in the section "Description of error message. These steps may not solve the problem if Error 8000FFFF code in a scenario which differs from that described in the section "Description of error message.

  1. Click Start
     Collapse this includes this image

     

     .

  2. In the Search box, type regedit.
  3. In the list of programs , click on Regedit.exe.
     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type the password or click continue.

  4. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\COMPONENTS
  5. Click COMPONENTS.
  6. Click export.
  7. In the file name box, type COMPONENTS.
  8. The area Save in , click desktop, and then click Save to save the file to your desktop.
  9. In the Details pane, right-click PendingXmlIdentifier, and then click Remove. If this value does not exist, continue to the next step.
  10. In the Details pane, right-click NextQueueEntryIndex, and then click Remove. If this value does not exist, continue to the next step.
  11. In the Details pane, right-click AdvancedInstallersNeedResolving, and then click Remove. If this value does not exist, continue to the next step.
  12. Restart the computer.

  To check if this fixed the problem, go to the "fact this corrects the problem?" section.

  If the above does not resolve the problem, follow the previous advice given.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1310 stop download why?

  I have windows 7 just

  received the system and no matter were to go to download the player

  I get this error and cannot download.

  There is a Permission problem.

  In Windows 7 and Vista.

  Activate the account of hidden Admin and Login to the hidden Admin account to do the same.

  To activate it, use the command

  Click Start-> Type "cmd" in the search

  Make a right click on CMD choose Run as administrator.

  Type the command - net user administrator / Active: Yes and press enter

  LOGG off and login to the Admin account.

  The devil using hidden Admin - net user administrator / active: No.

  Sanjay Manju Suman

  Adobe System Inc.

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• Satellite P300-1CN - error message when download of MSN messenger

  I recently updated my Satellite P300 - 1CN PSPCCE to Windows 7, after this everything seems to work ok but if I try to download msn messenger is comes up with an error saying the file may be corrupted hr: 0x8007000d.

  I am not the most technical of the world, but would like to know what I need to do on this issue!

  Help please!

  Hi Brian,.

  I think that it of really difficult to tell why you get an error when you download MSN messenger.
  Where do you download the Messenger? You should try MSN or Microsoft page.

  This will happen if you click on download or start the downloaded file?

  Have you noticed this behavior with other downloads too?

• Error trying to download windows updates

  I get error 802400B other updates being installed as an error when I try to download the updates that I received notice. My system has been arrested several times and I don't see anything that indicates to Windows is loading. Please help tell me how to get around this error and to download the necessary updates (currently I have 13 in the meantime). Thank you.

  Jeff,

  Could get you 8024000?

  If so to resolve this issue, rename the Spupdsvc.exe file and then try again to install updates. To do this, follow these steps:

  1. Click on start and then click on run.
  2. Copy the following text, paste it in the Run box and then click on OK or press ENTER:
     Cmd /c %WinDir%\System32\Spupdsvc.exe Spupdsvc.old ren
  3. Try again to install updates. If you can't always install updates, see the "References" section for more information about how to contact support for Windows Update or Microsoft Update for assistance.

  MCP. MCDST. LVL 80

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Outlook express does not error _ code download new emails 0x8007000E

  Outlook express does not error _ code download new emails 0x8007000E

  out of memory?  a lot of memory!

  Go to file | Identities and setup a new identity.  Then when it works very well, use a file | Import | Messages to bring them from the old identity.  This gives a basis for new and incompetent messages and should fix things.

  Steve

• Download error. The downloaded file has no verification. Code of error = 0x80040507__Google Chrome Installer

  Hello. I have a problem that I recently received these messages on computer blue screen comes and goes... (bsofd) when im using the internet only. Told me to stop using ie 8 and google chrome but when I tried to download it it was the message that I received... "Download error. The downloaded file has no verification. error code = 0 x 80040507 ". I have windows xp... SP3. my hardware is dual cpu, 2 GB ram, 1 TB hard drive and 512 graphics card. Please help me

  Hi Arvind,

  You try to run chkdsk on the machine and check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win Vista error when the computer is open

  I've been surfing this site looking for an answer of the following error messages when I open the computer Application: open them all at the same time.

  1 could not start the dispatch table, win vista error

  2-cannot create TransportManagerServ: create

  3 - the third is a dialog box with the title: error SDMan WinMain. It says: an instance already exists! -OK

  Can someone give me a hand? Thank you

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also, try the following:

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP

• I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  Hello

  "I reset my laptop."

  What do you mean by that?

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• LindaanderssonYQ - photos of Vista - error response Code

  LindaanderssonYQ - photos of Vista - error response Code: repair worked and now everything is fine. Thank you very much

  Hello

  Glad to know that the problem is solved. If encounter you problems with Windows in the future, please contact us.

  Thank you.