Vista error unknown Bugcheck Code: 7th. Parameters = 0xc0000005, 0x1, 0x8dd8dc00, 0x8dd8d8fc

Similar Questions

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Vista error 80072efe installation code after fees

  I recently made a new installation of Vista, after getting a new hard drive, but I get the error 80072efe code from windows update. Any help would be appreciated gratefully.

  In addition to this question I can access the internet normally.
  The only change I made to the system had to change my MTU on the same setting that I used until I reinstalled Vista:
  netsh interface ipv4 set subinterface "Local network connection" mtu = 1400 store = persistent

  I tried running windows update every day for the past week and get similar behavior.
  I have deleted the partition and resinstalled Vista 4 times and tried to update before installing windows and programs and get similar behavior.
  I reset my router.
  I added the update URL as trusted sites.

  Here is my \SoftwareDistribution\ReportingEvents.txt:

  19:43:29:278 2009-07-15 + 0100 1 162 101 {B890A5BC-7090-4E80-9080-CA9C8EABE77D} {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 0 SelfUpdate success content download download succeeded.
  19:43:29:293 2009-07-15 + 0100 1 201 101 {831ECA2E-C602-4E20-8111-ABC60A6A2F78} {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 content SelfUpdate success install Installation pending.
  19:44:18:789 2009-07-15 + 0100 1 190 101 {7D884B48-E10D-4053-B7F7-B5E53464FC90} {174EAAC7-5A3D-448F-BE6F-D6FE450E1DCF} 1 0 SelfUpdate success content install Installation successful: Windows successfully installed the following update: ActiveX in Windows Update
  19:44:18:789 2009-07-15 + 0100 1 190 101 {57CA28FC-7B35-462A-BE1D-C23162B65603} {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 SelfUpdate success content install Installation successful: Windows successfully installed the following update: Windows Update central
  19:53:01:295 2009-07-15 {61F3F1E3-F505-4735-A8A1-D9755CD91D69} + 0100 1 199 101 {0011B9ED-9189-4D58-BE25-FA2F13FC3D6C} 240005 1 SelfUpdate success content install Installation successful and restart required for the next update: Windows Update to the
  20:21:08:891 2009-07-15 + 0100 1 148 101 {58EE1890-78ED-49E7-8E8C-7FD3EE5BF283} {00000000-0000-0000-0000-000000000000} 0 8024400 has AutomaticUpdates failure timing Windows Update Client software has not detected with 0x8024400a error.
  21:01:44:858 2009-07-15 + 0100 1 148 101 {24C2DE68-6592-4F99-B6C8-D2A68D9DE9B2} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  21:41:22:619 2009-07-15 + 0100 1 202 102 {5D20DDCD-5C7B-4A8F-A542-3174A3E1D06E} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates content success installation reboot completed.
  07:28:31:408 2009-07-16 + 0100 1 147 101 {BDEBF831-DB6D-4731-ADDA-B3418A6DDB61} {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates success software sync Windows Update Client detected 0 updates successfully.
  07:26:10:456 2009-07-17 + 0100 1 148 101 {D50A1202-0F21-486B-8E18-6761C5D0D12B} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  17:44:30:530 2009-07-17 + 0100 1 148 101 {A1AAD90E-D79C-4E2C-AB89-EBBA63693EA0} {00000000-0000-0000-0000-000000000000} 0 8024400 has AutomaticUpdates failure timing Windows Update Client software has not detected with 0x8024400a error.
  17:46:03:686 2009-07-17 + 0100 1 148 101 {32107CB6-6283-4DE9-8A86-06CC53875BA0} {00000000-0000-0000-0000-000000000000} 0 80072efe software failure synchronization Client Windows Update did not detect with error 0x80072efe.
  18:00:32:602 2009-07-17 + 0100 1 148 101 {41EA94B1-25FC-4C28-BC87-191FBBEDC8ED} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  08:51:24:405 2009-07-18 + 0100 1 148 101 {BC49C273-7CE5-4B93-97A8-8BA942F46DC3} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.

  I changed my router to my old USB modem and now I can see Windows updates.
  I'll try to reset or flashing of my router and see if it works.

• I'm unable to install the KB2727528 update on windows vista, error 800b0100 of code occurs

  upsate security for windows vista KB2727528

  Hi Ravi,

  Thanks for posting your question in the Microsoft community.

  I understand that you can not install the update KB2727528 you encounter the error 800b0100

  To understand that the question please clarify these questions.

  a. you did of the latest changes to the laptop?

  b. What are the issues affect the other computer?

  c. What are the options that you get on the other computer?

  There is an article in the knowledge base that provides methods to resolve the error 800b0100. I suggest that you visit the link and try the methods in the article.

  Error 0x800B0100 when updates installed by Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/956702

  If you encounter the same problem after having tried the methods in the article then let us know so that we can provide several methods to solve the problem

• Windows Vista error 800b0100 of code update

  Hi I get this error message despite the installation preparation tool system it seems to still train

  Its driving me crazy!

  pleassse help

  Cormac

  Hello

  see if that helps

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  http://support.Microsoft.com/kb/956702

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Vista - Error Code: 646 (Microsoft Office 2007 updates)

  I was warned by Windows Update I got Microsoft Office 6 "Major updates" dealing with security to download and install.  I am running Vista Home Premium operating system.

  6 updates are listed here:

  (1) security Update for Microsoft Office Excel 2007 (KB982308)

  (2) security Update for Microsoft Office InfoPath 2007 (KB979441)

  (3) update for Microsoft Office PowerPoint 2007 (KB982158)

  (4) update for Microsoft Office Word 2007 (KB982135)

  (5) security update for Microsoft Office System 2007 (KB982312)

  (6) security Update for Microsoft Office System 2007 (KB982331)

  Updates download successfully.  It seems that they are installed correctly, 1 first 6, then 2 of 6, etc..   At the end of the process, I get a message that "some updates were not installed."  In fact, none of the 6 were installed.   Then I get an error message:

  Code 646: Windows Update encountered an unknown error.

  9 results for "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  1.	1 Windows Update error 80072efd
  2.	2 problems with installing updates
  3.	3 error code Windows Update 80070422, 80244019, or 8DDD0018
  4.	4 Windows Update, error 8024402C
  5.	5 Windows Update error 80070003
  6.	6 Windows Update error 80070643
  7.	7 Windows Update, error 8024001
  8.	8 Windows Update error 800f020b
  9.	9 Windows Update error 800f0828

  I have gone through each of them and tried to perform the actions suggested without success.

  I also tried downloading/installation these one by one, without success.

  Help, please.

  Hi all

  A new article was created to solve the problem, this KB includes a fix specifically for this issue. Here is a link to the KB:

  http://support.Microsoft.com/kb/2258121

  Thank you

  Bobby

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

  I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

  Alex

  While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  And for future disaster recovery programs:

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• LindaanderssonYQ - photos of Vista - error response Code

  LindaanderssonYQ - photos of Vista - error response Code: repair worked and now everything is fine. Thank you very much

  Hello

  Glad to know that the problem is solved. If encounter you problems with Windows in the future, please contact us.

  Thank you.

• Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

  80070490 = permission denied / [a problem initializing or using session variables] or item not found

  80070643 = ERROR_INSTALL_FAILURE

  http://support.Microsoft.com/kb/958044

• Vista - Error Code: 80070005 (unable to install KB936330)

  FAILURE of Windows Vista Service Pack 1 (KB936330)

  Whenever I try an update of widows with Vista, this error pops up: Code 80070005

  I go through the troubleshooting steps, but nothing helped. I turned off the coast of all anti-virus software to see, it would help, but nothing changes. I also accepted and the help of the internet, but no changes have been made.

  I need to update my Windows Vista Service Pack 1 (KB936330) or greater to install Linksys AE1000 and update my monitor drivers (HP - display - HP w2408 wide LCD Monitor).

  Help, please. Thank you!

  -Robert :)

  Hello

  It is a very difficult to solve.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  =============================

  An alternative to installing SP1 uses a direct download.

  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/kb/936330

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions
  http://support.Microsoft.com/kb/959064/en-us

  Windows - Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: unexpected character "(code 65279 / 0xfeff) in prolog. EXPECTED ' < ' to [line, col {source unknown}]: pop [1.1] error in c# windows client vSphere?

  Hi all

  I use Windows c# client below the version:

  

  Somehow, I had random error / intermittent pop up:

  Error: unexpected character "(code 65279 / 0xfeff) in prolog. EXPECTED ' < ' to [line, col {source unknown}]: [1.1]

  So I wonder if it is a recent issue with the Windows 10 .NET framework update?

  My other client c# version even on Windows Server 2008 R2 is not having the problem.

  FYI,.

  No need to upgrade to vSphere 6.0 yet. I updated the client vSphere upgrade VCenter server in 5.5U3d the project last week, so far, that's the problem:

  

  See the screenshot above for the stable version.

• Error (s) found: Code FFFFFFFE Windows Update encountered an unknown error.

  The problem with my computer is that installing any updates to Windows Vista and I get Code FFFFFFFE

  The updates are: security for Windows Vista (KB267652) updates and update for Windows Vista (KB2679255). Help, please. I tried to Fix It and he told me that the problem is resolved. However, every day I keep get these two important updates that will be installed on my computer. What can we do to fix my computer.

  This problem can occur if the system is infected with a malware (malicious software). To prevent the computer to become unstable, Windows will not install the update.

  Use antivirus software to check your computer for viruses. Start the antivirus program, check that it is up-to-date and updates and then run a full scan. If any are what virus or malware, clean or delete questions that specifies the antivirus program.

  Most popular: http://support.kaspersky.com/viruses/solutions?qid=208280684

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  If necessary: http://support.kaspersky.com/viruses

  http://www.eset.com/online-scanner
  Scan online ESET

  Fake security software: http://support.kaspersky.com/viruses/rogue

• Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030FB150, 0x0, 0xFFFFFFFFFFFFFFFF)

  My computer is still a lot of corrupted files and probably needs a new hard drive but I would like to know what this BSOD was caused by and if I might need to buy new parts, other than a new HARD drive

  https://onedrive.live.com/redir?RESID=19C73F339A06B0C9! 108 & authkey =! AMh4ubZLZ_oFWbE&ithint=file%2c.dmp is the minidump

  using WhoCrashed gave me the following:

  Wednesday, July 9, 2014 12:08:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\070814-25724-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030FB150, 0x0, 0xFFFFFFFFFFFFFFFF)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  What is causing file corruption could be the cause of the BSOD and vice versa.

  Bugcheck 1E, {ffffffffc0000005, fffff800030fb150, 0, ffffffffffffffff}

  Probably caused by: memory_corruption (nt! MiReplenishPageSlist + c0)

  1. this could mean memory, hard drive. or other hardware problems. In fact the lack of free disk space
  is a major cause. Make sure you have 20 GB or more of free space if possible.

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated the BIOS, chipset of low level driversand major embedded
  and drivers of different devices.

  BiosVersion = 0405
  BiosReleaseDate = 25/06/2012
  SystemManufacturer = system manufacturer
  SystemProductName = system product name
  Family = to be filled by O.E.M.
  SystemVersion = Version of the system
  SystemSKU = SKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = P9X79 THE
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL methods in the troubleshooters below if necessary.

  4 after ALL preceding if necessary run the Driver Verifier to see if he can indicate a CAUSE (see pilot
  Check the methods below).

  =================

  Methods to solve the problems:

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ============================================================

  BCCode: 1st 0x0000001E

  
  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the problems above and/or the
  methods below (which are the same).

  BCCode: 1st 0x0000001E

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The code for the unhandled exception
  2	The address at which the exception occurred
  3	Parameter 0 of the exception
  4	Parameter 1 of the exception

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  
  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  
  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

• The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
  Copy

  typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

  Use the command dd (display memory) to this address to view the data.

• The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

Here is an example of bug 0x1E on an x 86 processor control:

Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

==================================================

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

Start - type in the box search-> auditor/Reset hit enter to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

----------------------------------------------------------



References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (look for the BIOS and driver
updates.)

This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.

How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967
==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">