HP ScanJet 6300C

Similar Questions

• HP Scanjet 6300c will not install on WINDOWS 7

  I can't get my scanjet 6300c to install on WINDOWS 7. It is a problem of HP because they provide no support. I tried the XP drivers but they produce. Has anyone found a work around for this problem?

  Thank you

  Fritz

  Hi sonnichs,

  I found the following link with a problem similar to yours, with a possible solution:

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/72fb35be-c535-4EBC-Ace2-17b02f28f0b6

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Scanjet 6300c driver para Windows 7

  Hello

  I change Windows XP to Windows 7 and my scanner HP Scanjet 6300c did not have a driver to install.

  I hope to have a solution. Thank you for your help.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  From your post, it seems you want HP Scanjet 6300C drivers for Windows 7.

  If so, please refer to these links and check if this answer your question:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18414&locale=en_US&TaskID=135&prodSeriesId=25287&prodTypeId=15179

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=60104

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• How can I install my old hp scanjet 2400 driver

  I have not find a driver for my old HP scanjet 2400 driver. Help, please.

  You can download the drivers and software here:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=297430

  install the drivers according to the instructions on the site.

• hp scanjet 3800 no power

  I write in the right section?  I'm not sure. The site is really complicated and not easy to deal with.

  I have my scanjet hp model 3800, it used to work until suddenly collapsed for unknown reasons.

  my attempts: I connect it to a power source (I tried a few different), but it does nothing to show me that his life, is not even a light... nothing.

  My guess is that something is worng with the power to control device inside the scanner (any ), maybe it burned to the top for some reason any.

  now, what should I do?

  Serial number of the product if necessary: CN764A15CM

  P.S. This thread was moved to HP Service Manager / Service Center Support and Forum of News for Scanners - HP moderator of the Forum

  Hello

  This forum is in fact related to the software.

  Looking for information on a Scanner then please look in the following forum:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Could be a problem of supply of power on this thread:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/lost-my-power-supply-what-voltage-do-i-need-HP-ScanJet-3800/m-p/797399#M18182

  Kind regards

  Alex

• ScanJet g4050 not compatible with El Capitan

  ScanJet g4050 no longer works with El Capitan. I have iMac and on the update of OS X 10.11 the scanner stopped communicating with the computer.

  Any suggestions?

  Finally, I contacted HP.  They are aware of the problem. They said they no longer support scanjet G4050. However, they recommend a third-party software that can be downloaded on the net. BUT you will have to pay the money.

  That's what they said:

  The solution that we recommend is VueScan. http://www.Hamrick.com/VueScan/hp_scanjet_g4050.html

  If you pay 80 USD for the software of theVueScan get the scammer as he was running, or buy a new scanner.

  This is the case!

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• HP Scanjet 4300C compatibility with Windows 7

  I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

  In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

  I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

  Hope you can help me.

  TNX

  Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

  Here are the directions:

  1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.
  
  2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
  Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.
  
  3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.
  
  4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

  5 restart your computer.

  6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.
  
  The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

  My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.

• HP Scanjet G4010 Windows 7 software problem

  I recently updated my computer to Windows 7 and installed the latest drivers and software for my old scanjet G4010.  It will scan using the button on the scanner, but I can't adjust scanning settings (picture of quality, where the harvest, etc.).

  BUT the scanner software does not work. This brings me through the installer without any problems until it reaches the actual scan wick. By clicking on finish, there is no process of scanning, and nothing is recorded. Have you tried several places, but... nothing.  Not in a satisfactory way, such that it has reduced what was a versatile workhorse to a silent photocopier.

  Is there a solution?

  Hi Paul2001,

  I understand that since the upgrade your OS to Windows 7, you are no longer able to use the scanning software.

  I would like that you start here: 'No. Scan Options' or "scan settings are not defined", that will guide you through the troubleshooting steps and also the possible solutions.

  I would like to know if it was useful, if you have more questions please let me know.

  Thank you

• HP Photosmart software for scanner Scanjet G4010

  I upgraded my computer to an HP Pavilion with Windows 7 64-bit OS.  I have a disc for the HP Photosmart software for my Scanjet G4010 but it is Version 9.0 for Windows Vista.  Where can I get a copy of this set of programs for Windows 7 that I can install it.

  Hello RichardM02

  The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.
  
  You will find the Board Commercial Scanner here.
  http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418

• Windows 7 drivers for hp scanjet 4600?

  I'm looking for a Windows 7 driver on my 4600p scanjet, because I intend to move from Windows XP to Windows 7 now.

  Hi Poulladehoff,

  These programs use the Windows drivers. Connect the scanner to the computer automatically installs the Windows drivers. It should work with Microsoft Office as well as Paint.

  It would be a sort of trial and error of the thing.

  Hope it will be useful.

  Thank you.

• ScanJet G3110: Scanjet G3110 is supported in Windows 10?

  Anyone using Scanjet G3110 on Windows 10?
  All the problems?
  Impossible to get a clear answer from HP on whether or not it is supported.
  Just get scripted response that send me links that don't answer the question.

  Welcome to the HP community @Dave22015,

  I understand that you want to know if the Scanjet G3110 is supported on Windows 10. Although I can't find any sort of confirmation that it is supported, the best you can do is try to install the driver Windows 8.1, to see if it works.

  Click this link, click on "Edit" to the right of the page to change the Windows 8.1 operating system and download the full driver here.

  Driver and HP Scanjet Full Feature software

  Good luck

• Using scanjet G4050 HP scanning 35mm slide

  A week ago, I bought a HP scanjet G4050. I bought to digitize old 35mm slides, I chose this model because it was written, I could scan 16 slides at the same time, but I can't find a software that can do!

  Please help me!

  My operating system is Mac OS X 10.9 Mavericks.

  Sorry for my bad English, I write from the Italy.

  Thank you very much in advance for your answer!

  Sorry for my bad English but I'm Italian and my English is not very good!

  I solved my problem, I "reset" my mac, so I downloaded this driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4159 & LC = IT & CC = IT & DLC = IT & sw_lang = & Product = 3236377 #n177

  and I bought vuescan standard edition (because with the free, it did not work) and now I can scan slide 16 in order!

  I save in 1200 dpi and for all slides 16 it takes more or less 50 minutes, sometimes, it seems that the scanner is stuck, but I think the problem is that my mac is not powerful enough to image realignment process takes a lot of time.

• How to operate the scanner hp scanjet 4400c on windows operating system 7

  How to run the scanjet 4400c operating system windows 7

  The simple answer is that the HP scanjet 4400c scanner is NOT supported with Windows 7 operatingsystem drivers.

  Read the bottom of the page in the link above. It offers links to 3 third-party drivers that can give the features.