Vista for windows xp
My laptop came with windows vista home basic on it it will work well if I install windows family xp instead of vista?
Read below and select for drivers:
Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...
If the XP drivers are not available for your model, forget the idea.
If Yes, download and save to a CD or Flash drive.
Then buy a disc XP and license.
Save all your data because it will be lost during the installation of XP.
Then follow the steps below to do a clean install.
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
Once installed, reload ALL your other programs of original media, or download again.
Reload all drivers and utilities for your motherboard.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Failure of Vista for windows easy transfer 7 with Belkin cable
Trying to transfer files from n ° 1 HP laptop with VISTA for HP laptop n ° 2 with Windows 7 using the Belkin cable. Each computer has transfer easily installed and after following all the instructions which on-screen: "Welcome to can I easily transfer", "what do you use to transfer items to new computer? (a cable easy transfer), "what computer do you currently use? (it comes from my old computer (vista)), ' what computer do you currently use? (this is my new computer (windows 7)), "Do you need to install Windows Easy Transfer on your old computer?" (I've already installed it on my old computer)
Then I plug the cable and get the box with the following WINDOWS EASY TRANSFER: Migration failed... Windows Easy Transfer will now be canceled.
In fact I never got screen: "try to connect" or showing the transfer progress
This should help.http://support.microsoft.com/kb/928634/
Happy new year
-
I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit. Whenever I try to install it, I get one above mentioned the error code. I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.
Hello
You are able to install all other updates of Windows without any problems?
Follow these methods.
Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error. After you run the analysis tool, try to install the update.
You can download & run the system update readiness tool and check.
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2Method 2: If this does not help, you can temporarily disable antivirus software, and then try to install the update.
Disable the antivirus softwarehttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 3: If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update. Follow these steps.
Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, place the computer back to normal following KB article.
Step 2: Now, try to install the update manually.
You can go to http://www.microsoft.com/download and use the number of the update to download and install it.Reference: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?
8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
One or more required members of the transaction are not present.Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.
CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista
When you are prompted to save CheckSUR, choose to not run it.
When the download is complete, close all open programs and browsers.If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.
NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off
Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
If the system can search, detect, download, and install updates now, save an update of a subsequent test.If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
See if the registered update installs now.If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named
Windows\Logs\CBS\CheckSUR.log
Windows\Logs\CBS\CheckSUR.persist.logIf the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.
-
I get error Code 8007371 B. I tried several times to install and it still fails? What can I do to have it installed.
Hi CSAMaximus,
(1) how long have you been faced with this problem?
(2) what is the complete error message you receive?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Download and install the tool of the system was last updated
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821
Method 3: the clean boot computer and then try to install the updates.Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
My Windows is set for automatic updates, I am running Vista SP2.
Update for Windows Mail Junk e-mail filter for x 64 systems [November 2011] (KB905866) didn't load a number of times.
He gave details of the error: Code 800736 B 3.
Downloaded and run MicrosoftFixit, it is said that it is fixed.
I went into Windows Update and tried downloading it twice, but it does not always load.
It does not appear to slow the computer down while it tries to download.Hi Alex-862,
1. you have made no changes to the computer before the broadcast took place?
2 are you able to install all other updates?
3. do you have the 64-Bit Windows Vista installed on the computer?Method 1
I would say allows you to clean start, then download and install the update from the Download Center.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 of section of boot KB929135 to the computer in normal mode.Update for Windows Mail Junk e-mail filter for x 64 systems [November 2011] (KB905866)
http://www.Microsoft.com/download/en/details.aspx?ID=20999Method 2
Try the steps from the following link:Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821 -
Photo Dell AIO 964 Driver for Windows 7
Support site left me no option since the two are incompatible. Someone help?
kimagal,
I'm guessing that you have a 64 bit system. Start, Control Panel, System. It should be in there if the 64-bit system. 64-bit drivers are listed below.
First run, delete print jobs to eliminate any print job stuck in the queue.
Unplug the printer.
Start, Panel, programs and features, your printer, uninstall
Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal
Download the 32-bit drivers for Windows 7, 8 and 8.1 32-bit Vista or 64-bit Vista for Windows 7 drivers, 8 and 8.1 64-bit. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).
You will find links to drivers to...
Dell 964 Photo-All - In - One Printer owners thread (W7)
Also try to read...
Enable the printer after Microsoft Essentials/Windows Defender
Rick
-
Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7
There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:
DeskJet 710
DeskJet 712
DeskJet 720
DeskJet 722
DeskJet 810
DeskJet 812
Deskjet 820
DeskJet 822
DeskJet 1000
The attachment contains a fix for this problem for Vista and Windows 7.
[The patch does not work for Windows 8, 8.1, or 10 x 64 systems. There are efforts to this address, if a solution is developed it will be shown here. [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]
First of all make sure that the driver for the installed printer. If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)
Apply the patch as follows: log in to the computer with an administrator account. Download the patch by clicking on this link or on the trombone at the end of this post. Save the hotfix on your computer, then unzip it. Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows. You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.
This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste. Depending on your UAC settings, you may need to provide confirmation. Also allow existing files to be replaced if you are prompted.
This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.
Update - here is that of the more detailed installation instructions:
Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer. Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:
MD c:\temp
CD \temp
Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).
[Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.] If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]
Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)
*. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).
Net stop spooler (ensures that the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)
NET Start Spooler
Output
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it's OK to replace the files, say "Yes".]
At this point, the patch is installed and ready to print.
Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel]. If you use a make you converter USB / parallel it is supported in your operating system. The following messages are reported by cables USB-parallel that are supposed to work in Windows 7. A driver is required for the converter USB / parallel besides the driver of the printer. For converters supported, it is usually provided automatically in Windows 7. Note: the appropriate to select for USB-parallel converter port is often USB001:. I've heard of cases where the port was USB002: or LPT3: as well. If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.
Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4
If you use Windows 7 do the following: log in as a user with the administrater properties. [The following assumes that you are using IE as your browser] Click on the here link and select "Save". Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all. If extract all is not an option, then click on "Open with" and select Windows Explorer.
Leave the default directory and check the box "Show extracted files when you are finished", excerpt. Click Start, computer, and type % windir%\system32\spool\drivers\x64\3. Arrange the windows so that you can access the two parts of the window. Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll. Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.
Note: %windir%\System32 is a system variable that points to the Windows directory. For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer. If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.
-
Satellite L300 - I can not install an update for Windows Vista
I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.
When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?
The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.
I would like for you to perform general troubleshooting steps for Windows Update.
This diagnosis is generally applied to all Windows Update related issues.
Stop Windows Update services *.
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. If you receive a user account control notification simply click on continue.
3. at the command prompt, type the following commands and press ENTER after each command.
net stop wuauserv
net stop bits
net stop cryptsvc
4 Please, do not close the command prompt window.* Rename Windows Update records *.
1. at the command prompt, type the following commands and press ENTER after each command:
2 ren %systemroot%\System32\Catroot2 Catroot2.old
3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4 Please, do not close the command prompt window.Registration of DLL's on Windows Update *.
1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.Restarting Windows Update services *.
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. If you receive a user account control notification simply click on continue.
3. at the command prompt, type the following commands and press ENTER after each command.
net start wuauserv
net start bits
net start cryptsvc
output
4 now, please check the updates via Windows Update to determine if the problem has been resolved. -
12.2.3 for Windows Vista
I need the latest version of Itunes for a new iPhone SE. I'm still on Windows Vista. Http://www.apple.com/itunes/download/ page:
12.3.3 iTunes for Windows XP/Vista
When I go to this page I see that:
iTunes 12.3.3 for Windows 7 or later
After a few years Apple (and other companies) probably decides that there are so few users of versions of a particular system, it is not economic to invest in the development of software for systems, particularly given that some systems have simply not hardware or software ability to support new features. It's just the way it is through technology. I guess the underlying rationale is that if you can afford a gadget you can afford the newest computer and Internet broadband too.
No, I think Apple is bringing out a version of iTunes XP/Vista.
-
HP Pavilion a6157c: Upadting bios for vista in windows 10
I need an answer to this. I found an update of the bios that comes out in 2012 and I want to install the last update, but im using windows 10 and this was updated for windows vista, can I install this update of the bios under windows 10 or I can't and have to downgrade to windows 7 and do? Thank you!
Download the softpaq and double-click it. If it is running, then it should update the BIOS.
-
Re: Satellite X 200 - 22F - is - can I use BIOS of Vista 64 bit for Windows 7?
Hello!
Can I use Vista 64 - bit - 2.50 for my X 200 - 22 Satellite BIOS update? I just installed Windows 7 HOME PREMIUM 64 bit and it works fine.
Before that, I had XP-32 bit running.Thank you in advance!
Tom
Hi tn411,
I guess that the BIOS of 64 bit Vista would be the best choice for Windows 7 64 bit. The other version of BIOS on the Toshiba site seems to be for 32 bit OS, so you can choose the 64-bit version of Vista.
If you have any other questions, please let us know! :)
-
4.8.0.0Update1214 driver Conexant Audio Driver for Windows Vista
Who has already install vista 64-bit can tell me what this driver for vista 64-bit?
Update driver Conexant Audio Driver for Windows Vista 4.8.0.0 1214
I put t know exactly if it of true but some P100 camera supports the audio chip Conexant CX20551-22.
If you are looking for the Vista 64 bit driver you must search for the driver that supports this chip. -
Satellite A100 (PSAA9) Display Driver for Windows Vista
Hello world
This link does not work so I did not install my display driver for Windows Vista and system performance looks really terrible. I was wondering anyone use Satellite A100 (PSAA9) and Windows Vista. Because I was looking for this driver on the internet but I coudnt fint it anywere. This situation made me so sick.
How to prevent or to send e-mail to the Toshiba customer support any link broken. Or anyome know address direct download for Vista driver? Please help me asap :(15/02/07 Windows Vista 97.54 nVidia display driver
Thanks for your help,
Mehmet in IstanbulHello
Try the driver nVidia for Satellite P100 (PSPA0E).
nVidia drivers work for all their graphics chips.Good bye
-
Drive DVD Toshiba for Windows XP, not only for Vista?
Hello
on www.csd.toshiba.com you can download
DVD Player Toshiba for Windows Vista (v1.20.10, 04/03/2008; 47 M)
but I use Windows XP - is there an available from Toshiba DVD drive?
Windows Media Player says it cannot decode my DVD - ok, I don't want to use the media player at all ;-)
Thank you much for the help. :-)
Hello
I think that the DVD from Toshiba drive was developed only for Vista
I found just that some versions for Vista 32 bit or 64 bit VistaSee you soon
Maybe you are looking for
-
Home page does not say last FF, update page says that it is what to do?
Under sarch bar on the home page, "warning!" you do not use the latest version of Firefox. Click here... for update now ". When I click, it takes me to the page of Firefox, which tells me that I am using the latest version! I've updated to FF. I boug
-
Win 7, new tabs open to download programs, I don't want to, how can I stop this
New computer with Win 7, download Mozilla, several times when moving the mouse on a new page and clicking on connection or somewhere on the page, a new tab opens, most of the new tabs will be sites soft ware, saying I have to load it a program, such
-
Which version of Skype works with the old computer Win
Hello. I have a very old pc with Win XP SP3. I've updated Skype to the latest version and I can't use my webcam. Unfortunately, I don't remember which version of Skype I had before. Can you please tell me what is the latest version of Skype still wor
-
Closed applications return to Mode where launched?
Most of the desktop mode apps that I use, I pinned to the start screen. When launching an application that is not a modern user interface switches to the desktop mode to open the start screen and closing back to desktop mode. I rather would return