Vista Home and Quickbooks

Similar Questions

• I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD

  I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD.

  I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD.

  This response does not answer your question immediately. Just my suggestion for an alternative...

  You lose a lot of time and money ventually, using DVD.

  Less than $100 you will get a very good external hard drive, and you can make a backup of files into it.

  In the long term, it is less expensive than the purchase of DVDs and a pain to store.

• I have windws vista home and it has several virus pop ups I had installed avg.free but now I bought the security cd internet AVG one can not install, please help!

  I have a windows Vista Home Basic that crashed near virus that I had installed avg.free but it has expired now, I bought the new protection but don't know how to install it, please help!

  ... I bought the new protection but don't know how to install it

  Too late now! See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~~~~~~~~~~~~~

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer came with vista home and I've upgraded to windows 7. I deleted THE 32 bit in error. What should I do? There are programs that will be running only on 32 bit IE

  My office is a hp pavilion phoenix self. It had vista Home premium installed. I upgraded to windows 7 and now using this operating system. I removed IE 32 bits in error and now I only have THE 64-bit. How can I get THE 32 bit on my computer because there are programs that IE 64 bit does not work. There should I let the dog sleeps lying?

  Press Windows key + R

  Type:

  C:\Program Files (x 86) \Internet Explorer\iexplore.exe

  Right-click and PIN in your taskbar

• Vista Business and Quickbooks Pro 2007 compatibility

  I have a MAC that has installed windows programs can be used and I want to be sure that the QB 2007 Pro is vista compatible. The man in the store said, but rather get another YES someone here if not more! :) Thank you!

  Read the info directly:http://support.quickbooks.intuit.com/support/pages/ContentSections/ResourceCenters/Vista/VistaCompatibleProducts

  Products and Services that run on Microsoft Windows Vista

  QuickBooks products and services that run on Microsoft Windows Vista

  Most of QuickBooks products and services work with Vista without any necessary changes. However, some require specific settings work properly with Vista, and some do not work with Vista. The following tables contain the list of goods and services in each category

  See you soon.

  Mick Murphy - Microsoft partner

• can I take a copy of OEM Vista Home and install it in VirtualPC after upgrade to 7

  One of my computers came with Vista 64-bit Home Premium edition. I've since upgraded to 7 and have defined as a dual boot so I can support others using Vista.
  Is it possible to extract the installation of the "recovery partition" files on my system and instead to install Vista as a virtual machine, so I can get rid of the dual boot and free space hard disk Vista care? I can install applications on the virtual machine if necessary.

  I have VMWare and Virtual PC installed.

  So, to summarize, I have 3 questions.

  1. is it legal to use a preinstalled OEM copy of Vista like that, or is it considered using it on another machine? I use it on main technical terms on the same machine, he came, but with Winodows 7 as OS these days.

  2. will I have difficulty to activate? It probably allows to detect the hardware like VMware or Virtual PC instead of a gateway DX4200 something (I forgot and don't feel like diving under the desk to look at).

  3. How can I go about extracting the installation files to do this? I really need instructions in the procedure.
  It's mostly a question of «how to make a Vista installation from the recovery partition CD»

  Hello

  your OEM license is related to the hardware in your computer where it was installed at the factory

  a virtual machine facility is different from the normal resettlement that is required for the Activation of the OEM license

  Contact Gateway for how to make recovery disks

  This isn't their recovery process, Microsoft

  You should find information here:

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  _________________________________________________

  and if you use a vista license to upgrade you cannot use this license vista to reinstall vista anywhere else

  It is part of the upgrade and is related to the installation of upgrade

  __________________________________________________

  and installation on a virtual machine is counted as a facility

  on the same machine a license = one Installation is still the rule

• I have windows vista home. and I had my laptop in the shop twice for virous removal and I get a code 646 on my laptop.

  Please help me. ? I had my computer in the store twice and abduction virous had done on it and I have a security program which is to stop the virouses enter in my laptop. I run Kaspersky security 2010 and I have a malware bites and anti spam as well as another system my tech told me. so, I want to know how can I keep these 646 codes to stop coming on the laptop. I have a toshiba with a pentium dual core prossesor.

  If you experience problems with the Office updates, try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If it always creates a problem disconnect from the internet and then try to install the updates, and another thing, you can try is turn off UAC before downloading a first update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  If not for the other updates:

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  TaurArian [MVP] 2005-2010 - Update Services

• Hi__Am trying to install service pack 2 on my laptop windows based windows vista home and it comes with error:trust_e_nosignature (0x800b0100) tried to check for system update tool and yet do not instill.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Please see here: http://support.microsoft.com/kb/956702

  and here http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/8f4ab273-8528-487f-8af3-aa75c7bb0186

  Matthieu Arkin - Microsoft Partner - http://twitter.com/Microsoft_Cares - all messages are "like what" without warranty of any kind, explicit or implicit

• Vista Home and missing DVD drive

  I get this problem too-it is spent as I don't know how many times whenever I stop and start at my office. Mr Fixit works only once. Real frustrated too that I think I have an external DVD burner instead.  I find that this usually happens after a few updates of windows.

  Did you do the installation of updates of MSUpdate pilot error?
  In hardware devices if there is a yellow exclamaition mark next to the dvd player, rt click on uninstall and then restart
  Or it could be something as simple as a bad disc connection

• want to remove network and start over, vista home prem

  Have a Vista home prem (primary) machine and am networking with XP (secondary) machine.  I have a wireless set up and, subsequently, a small business network. I would like to erase and start over with a cable from my router network cable.

  Hello

   
   
  Follow the below mentioned article:
   
   
  Disconnect your computer from a network or network drive
  http://Windows.Microsoft.com/en-us/Windows-Vista/disconnect-your-computer-from-a-network-or-network-drive
  
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Host and network small office: recommended links: http://windows.microsoft.com/en-US/windows-vista/Home-and-small-office-networking-recommended-links

• I have a disk with win 98 and I would like to know how to install it on top of a tower with vista home premium on it.

  My lap top has vista home and I tried to install Win 98 on a drive. I get messages saying that it can not be installed.  The installer on the disc advises to install using MS-DOS. However, the file of course dosen't address install on a computer with vista home. I am not able in the BACK. I'd like some simple instructions to install it if it is possible.

  You need to do using a Virtual Machine (Finally, there are other ways, but this is the simplest and the best option). http://www.dnncreative.com/Tutorials/DNNTutorialsforAdvancedUsers/VirtualPC/tabid/394/Default.aspx.

  Once the virtual machine is configured, see the follwng on how to install Windows 98 on it:http://www.vistax64.com/virtual-pc/174999-re-installing-windows-98-a.html.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Downgrade from Windows Vista Home Edition to Windows XP Pro Dutch on Satellite P200-15N

  Not knowing where I really should put this... I put it in this part of the forum too :)

  So:

  Hello

  I bought a new laptop with Vista Home and two Partitions... I would like to install on the second partition "Windows XP pro" (with official key & SP2 included)! But when I run the XP Cd I get an error that the HD is not recognized... So I searched on the forum here, to see if there is a possibility of passby he...

  So what I did:
  (1) I download the "Intel storage drivers" of->
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  (2) I used the Floppy machine, to create a floppy disk with the necessary drivers (also from the above site)

  (3) I downloaded a copy of freeware "Nlite".

  (4) I also downloaded the additional drivers on the "Toshiba" site itself (Lan, storage,...)

  (5) I did a "Xp Pro P200-15N" card and put all the drivers... Including the Exe I downloaded from the link above named "iata76_cd.exe"...

  (6) I have made a new Win XP bootable CD with "Nlite" & added all the drivers that I downloaded and followed the procedure given by "Nlite". He made a new bootable CD (with all the drivers and .exe and .inf, etc...)

  (7) then I boot my laptop with the CD, but it always gives an error on sata drives... (that it can not be found...)

  So my question is... What I'm doing wrong and what should the other drivers I download to make it work? I have an external USB floppy drive... If additional drivers must be added... So I hope that there is someone can help to Ho...

  I install XP for professional reasons. Things Vista Home can not handle...

  Hope I got a respons soon... CZ, looks really URGENT...

  THX in advance and sorry if there are errors in my writing (I still am of Belgium)

  UPDATE *.
  The method above does not work for me... So took my USB floppy drive and put the drivers on it (hit 'F6' at the start, added the drivers found on the link above, it install it)...
  Then I could also choose a partition...

  So far so good... He asked me if wanted to format it or not... I said ok...
  Then, when he wanted to start the copy, I got:

  Insert the CD-rom or the floppy disk with the name
  Driver Intel Matrix Storage Manager
  In station of A:

  * Press ENTER when you are ready...

  And I do not know what I do... CZ hitting enter doesn't do anything: s

  So what I'm doing wrong, it becomes really ANNOYING and frustrating... I did everything they said in the link, in fact the method with f6, but still now reaction: s... Everyone?

  Sincerely,
  Frédéric

  Thanks for the latest info!

• Vista problem and portable

  I have a Sony Vaip laptop running Vista Home and it is stuck on 0% updates, it displays on the window for a few minutes then off the laptop and restarts with the same window appearing any ideas?

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to upgrade to Vista Home Edition

  I try to get Win XP Home to Vista Home and everything is fine until I get this error message during the installation of Vista without solution: 0x800703E7 and something about files being incorrect. Can anyone help? I have already searched for the monitor of performance & reliability but is not on my computer.

  Hi Greenut,

  Please take a look at the suggestion given to another user with a similar problem on the following Microsoft Newsgroup:

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.vista.installation_setup&tid=8ee5bec2-ec67-40fe-ad66-11282cbe224a&cat=en_US_9CA88DDB-D18D-FA0E-A366-6E527B0FBA67&lang=en&cr=US&sloc=en-us&m=1&p=1

  We can't wait to hear back from you on your results.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Event id 1101 on Vista home difficulty Viewer

  I have Vista Home and my computer crashes at least once a day, so I check the event viewer and I see that I always get this error http://technet.microsoft.com/en-us/library/cc727052 (WS.10) .aspx whenever my computer crashes. I'm looking around and I read somewhere that if something with the verification fails the computer crashes (shuts down... something like that). I looked for a solution, but none of them work... like the secpol.msc and one bunch of others. Is there a solution that works?

  Hi Allen412,

  Welcome!

  Yes, you must exit Safe Mode to perform the clean boot.

  Perform the clean boot and was able to keep your computer under observation for a day the problem occur randomly.

  Check out the link below to perform the clean boot in which article speaks to a few services and check which service is causing the problem:

  http://support.Microsoft.com/kb/929135

  If the problem persists, you can try Scan SFC.

  Follow the steps below to perform a System File Checker:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
   
  2. click on continue or provide administrator credentials if prompted.
   
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow
   
  4. press ENTER.
   
  It will look for corrupted files, it will replace the corrupted files and it will fix the problem.

  Good luck.

  Kind regards

  Manasa P-Microsoft Support.

  Kind regards

  Manasa P-Microsoft Support