Vista Home Premium Screensaver Aurora and the energy of Windows

Similar Questions

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Windows 7 upgrade from Vista Home Premium fails continuously at the end

  I tried to spend 3 times.  I ran the Windows 7 Upgrade advisor, and he said that I can directly switch to the 32-bit version of W7.  I currently have 2 SP installed in Vista Home Premium.

  When I run the upgrade, it goes through all the steps successfully. While in the part near the end of the process data conversion (about 5 hours) the system restarts in W7 and then I got an error message stating that the version is not compatible and it cancels automatically to Vista Home Premium.

  Help, please!

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• If I use at any time update in windows vista home premium upgrade to complete, I need a Windows Vista Ultimate key to activate too?

  If I use at any time update in windows vista home premium upgrade to complete, I need a Windows Vista Ultimate key to activate too?. Please answer

  Yes.

  You will need to BUY a Vista Ultimate Upgrade product key/license disk

  Windows Anytime Upgrade Vista is no longer available; which you always had to pay anyway...

  Try to buy Vista Ultimate Upgrade online: newegg, amazon, etc.

  Alternatively, try your local computer store.

  This isn't for free.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• When install Vista Home Premium computer hangs on the language selection screen. No visible cursor, the keyboard and the mouse does not.

  Hi, when I try to install vista that Home Premium 32 bits on the computer of my son, through the installation of loading files with the gray bar at the bottom, then goes to the screen language selection, at this stage, I can not select anything using the keyboard or the mouse. There is no cursor visible. Keyboard and mouse both work fine in the bios and on other machines. Have used other keyboards and mice on the machine in question, but that makes no difference. Tried another copy of vista, no difference. Tested on Windows 7 install and everything works fine!

  Very confused, thinking that it must be a driver problem, but how about him? Any help is appreciated!

  Hi Rickydg,

  Thanks for posting. Please contact ASUS and see if there is a BIOS update available for your system. Update the BIOS and then try to install again.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

  Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8.   All the downloaded slowly.   Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update.   When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours.   It reads "Configuring updates: stage 3 of 3, 0% complete.  The percentage of nevers turns off 0%.   I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option.   He immediately went the same configuration screen.  I left it again for 4 hours, but no change.   What should I do?

  The laptop is a HP tablet PC.

  Here's how to uninstall the ones you don't want.

  And how to change the settings of update and IE8 HIDE update!

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• User of Vista Home Premium (preload), KB2742595 and KB2789642 fail to update/pre-installed to update. Any suggestions?

  I am user of Vista Home Premium (preload), two important updates: KB2742595 and KB2789642 fail to update/pre-installed to update (tried on more than 1 occasion, individually and collectively). There have been other updates since that successfully updated. Any suggestions? Thank you very much.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/5b39ddc7-8b23-4459-9bf4-c1e0d6c07437

• 0x8007001b with Vista Home Premium Center backup and restore backup failure

  I have my Toshiba Satellite M205-S7452 with Vista Home Premium for about 8 months, and November 2007, backup windows, and restore program worked flawlessly. I was able to back up my music, photos and documents to a DVD on a regular basis. But then I started having an error halfway back up that says "drive cannot find the sector requested" with the 0x8007001b error code. It seems that the backup works partially - there are files on the DVD player but I don't know if it ends or not. I tried to do some research on Google and it seems that there is other people affected by this error, but I could not find suggested patches.

  Hi jennielah,

  Please use the Forum of the community for Vista.

  If it has started, use the system restore back to a point before you start. See below for instructions.

  If you can do that I have a work around you. Your specific error seems to relate to update failures, not only the Windows updates but the various failures of update.

  The job is to save it to your hard drive and copy the files on the DVD after the fact.

  I hope this helps.

  Please let us know if we can do something else.

  The System Restore tool

  Other troubleshooting methods, such as using the System File Checker tool, cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue .

  1. In the System Restore dialog box, click choose a different restore point , and then click Next .

  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next .

  3. Click Finish .

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore, if you would like more information

  http://support.Microsoft.com/kb/936212/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home Premium doesn't recognize the Iomega Floppy Plus 7 in a reader

  Are there drivers updated to Vista Home Premium OS install for install / will recognize the IOMEGA "Floppy Plus 7 in a Card Reader USB?  I can only find Windows XP SP2... don't worry!  PLUG-AND-PLAY does not load the appliance.  Help!

  Franell,
  Thank you for visiting the Microsoft Answers community forum.

  Have you tried to install the driver for your device in XP compatibility mode?  You should be able to right click on the file and select Properties, then click on the Compatibility tab.  Here are more detailed instructions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Unfortunately, your device is not listed as compatible with Vista, so it may not work.  You can find Vista compatible hardware and software by visiting the center of compatibility of Vista here:
  http://www.Microsoft.com/Windows/compatibility/

  You can also use your favorite search engine and search the Internet for "Vista compatible floppy drive.

  Let us know if we can provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell 531 Vista Home Premium as long as the factory restore

  My Dell Inspiron 531 came with Vista Home Premium. I want to restore to original factory, which is stored on a partition disk of "D". Instructions say reboot and type "Ctrl F11". LTRC F11 will not prompt in BIOS - it restarts just windows. Hoe can I F11 to work?

  See this:

  Restore your Computer´s software to factory settings
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_336966&isLegacy=true

• Operating system of Windows Vista Home Premium 64-bit and Web folders

  I have a person how contacted me via his personal computer.  The laptop runs Windows Vista Home Premium 64-bit operating system.  He tries to use his web folder.  The system is up-to-date on all Microsoft Patches, including Service Pack 2.

  When you try to add a network folder by using the network location feature add to create the web folder a message occurs the link is not valid not a folder.    However, I know a valid folder because it works on Windows Home Premium Service Pack 2 32-bit very well.

  Yet once, why he does not on Vista Home Premium Service Pack 2 64-bit?  Y at - he of the additional fixes that do not appear on the Microsoft Update?

  I also have the same problem. The KB907306 does nothing for my system.

  Any other ideas?

• Windows Vista Home premium, suddenly tells me " this copy of windows is not genuine " but it is ! how can I fix it?

  Just, I turned on my laptop and logged on to windows. My office is now black with writing down stating "Windows Vista build 6002, this copy of windows is not genuine". That's not true, I've had this laptop for 3 years and Windows Vista Home Premium installed. A popup come ask me to enter a product key, because the current one is not valid. How can I fix without reformatting my laptop?   Diagnosis: Diagnostic (1.9.0027.0) report:-Windows Validation Data--> Validation status: Invalid Code of Validation of license: 50 of the online Cached Validation Code: n/a, hr = 0xc004f012 Windows product key: *-* - 27HYQ - XTKW2-WQD8Q Windows Product Key hash: U8YEZzymoD4DMyaMb32rPrNIS90 = Windows product ID: 89578-OEM-7332157-00061 Windows product ID Type: 2 Windows license Type: OEM SLP Windows OS version : 6.0.6002.2.00010300.2.0.003 ID: {A0E2EF63-1522-475B-9FF0-963FA081E614} (3) is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: N/A, hr = 0 x 80070002 signed by: n/a, hr = 0 x 80070002 product name: Windows Vista (TM) Home Premium Architecture: 0x00000000 Build lab: 6002.vistasp2_gdr.111025 - 0338 TTS Error: Validation diagnostic: resolution state: n/a Vista WgaER data--> ThreatID (s): n/a, hr = 0 x 80070002 Version : n/a, hr = 0 x 80070002 Windows XP Notifications data--> cached result: n/a, hr = 0 x 80070002 file exists: No. Version: n/a, hr = 0 x 80070002 WgaTray.exe signed by: n/a, hr = 0 x 80070002 WgaLogon.dll signed by: n/a, hr = 0 x 80070002 OGA Notifications data--> cached result: Version 102: 2.0.48.0 OGAExec.exe signed by : Microsoft OGAAddin.dll signed by: given Microsoft OGA--> status of the Office: 109 N/A OGA Version: registered, 2.0.48.0 signed by: Microsoft Office Diagnostics: data browser B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3--> Proxy settings: n/a User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32) default browser: C:\Program Files\Mozilla Firefox\firefox.exe download signed ActiveX controls: fast download unsigned ActiveX controls: disabled run ActiveX controls and plug-ins: allows you to initialize and script ActiveX controls not marked as safe: disabled allow scripting of Internet Explorer Webbrowser control: disabled Active scripting: allowed ActiveX controls recognized safe for scripting : allowed File Scan data--> data--> Office details: {A0E2EF63-1522-475B-9FF0-963FA081E614}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-WQD8Q89578-OEM-7332157-000612S-1-5-21-3416911695-796256846-1903382592Hewlett-PackardSLIC-MPCHewlett-PackardF.2420090612000000.000000 + 0009A323507018400F80c 090409AUS Eastern Standard Time(GMT+10:00)03HPQOEMSLIC-MPC109 Spsys.log content: 0 x 80070002 License data--> the software licensing service version: 6.0.6002.18005 name: Windows Vista,. Edition HomePremium Description: Windows operating system - Vista, channel OEM_SLP ID of Activation: bffdc375-bbd5-499d-8ef1-4f37b61c895f Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f Extended PID: 89578-00146-321-500061-02-1033-6001.0000-1162009 install ID: 019165974743391526041611203961964143082522908981268483 processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473 Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474 use license URL: http://go.microsoft.com/fwlink/?LinkID=43476 product key certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43475 partial product key: WQD8Q license status: Notification Notification reason: 0xC004F059. Windows Activation Technologies--> s/o HWID data--> HWID current hash: OgAAAAEAAgABAAEAAQADAAAABQABAAEAeqjuyVAeRPB6f3Sf/N3y9C3imog8/t0OsPbUCqxWaCxGyg == OEM Activation 1.0--> n/a OEM Activation 2.0 data--> valid BIOS for OA 2.0: no, not valid SLIC table Windows marker version: n/a OEMID and OEMTableID consistent: n/a BIOS information: ACPI Table name OEMID value OEMTableID value APIC HPQOEM SLIC - MPC FACP HPQOEM SLIC - MPC HPET HPQOEM SLIC - MPC BOOT HPQOEM SLIC - MPC MCFG HPQOEM SLIC - MPC LAURENCE ASF!            HPQOEM HPQOEM SLIC-SLIC-MPC SSDT PmRef CpuPm SLIC-MPC

  Your problem is that the PC is unable to properly read the table BIOS SLC, which should not be able to activate the key to OEM_SLP product in use here.

  You must change the key to that on your COA sticker on the case of the machine, using the link to the product key of Cange the bottom of system properties - you will then need to activate by phone.