"Library not registered" in Vista Home Premium in network and sharing Center trying to activate the password protected sharing.

Similar Questions

• CD\DVD will not work. Vista Home premium, 64-bit. Message says: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I downloaded the drivers needed from the Dell site and the burner will not work. The computer was again in March 2009. Not sure where the drivers should be located. I downloaded on: win\syswow64\drivers\afc.sys. I've looked everywhere and tried to find a dialog box offering the option "update drivers" for this device. Could not find a way to do except Dell and that doesn't seem to work. The 64-bit system has no 'Device Manager' that I can find. When I look at the properties of the burner, the link to "find a solution" is not highlighted.

  Hello DanHenry,

  Try the miracle solution at this link: http://support.microsoft.com/kb/314060 but before you uninstall all third-party software (example: Nero, Roxio, iTunes). You can reinstall your software after you reboot your system. Please let us know if this helped you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• Not to say could not upgrade from Vista Home Premium to Windows 7 Professional

  I pre-ordered Windows 7 months with no indication that I couldn't switch from Vista Home Premium to Windows 7 Professional without performing a new installation.  Now I learn that I have to re - install all THE programs, once I have perform this upgrade / 'clean install '.  All the criticism of Windows Vista pales in comparison to my irritation at says this news AFTER the purchase, and not before.  Failure of the installation of the Windows 7 Upgrade Advisor to note any problem.  All previous Windows upgrades went flawless.  Needless to say I am extremely disappointed by this turn events and we hope that Microsoft will improve its pre-purchase counseling in the future.

  I guess I have no choice now but to do a clean install of Windows 7 and then reinstall on my computer that will put me out of use for a long period of time?  I backed up the entire hard drive before trying to install, but I doubt I can get by simply restoring this backup.  Is this correct?

  Hi pwcushman,

  Thank you for visiting Microsoft Answers.

  Windows Live OneCare Backup works in stages. You start by setting up how you want Backup to run and save the configuration. The backup will then run according to schedule and backup your files according to the saved configuration. You can make changes to this list or add other files and folders.

  You can restore all files and folders, but you will have to reinstall all the programs.

  Check this link for more information:

  http://OneCare.live.com/standard/en-us/prodinfo/backuprestoredetails.htm

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DOES NOT UPDATE MY VISTA HOME PREMIUM

  MY VISTA HOME PREMIUM 32 BIT DOES NOT UPDATE AND I KEEP GETTING THIS ERROR 80073712 CODE.
  "PLEASE HELP ME"!

  http://support.Microsoft.com/kb/957310

  Above is resolution of Microsoft to your error Code.

  But it is perhaps not very simple to fix.

  1. try Method 1 to above website. Run (Checksur.exe) system update readiness tool

  2. do you have Service Pack 1 installed Vistra?

  Method 2 is in the list.

  3. method 3 is to do a Vista repair install.

  You need good Vista disc to do this.

  4. If none of the works above, you need to reinstall Vista, using either the recovery disk/s or the recovery partition.

  Save all data before you do, because it will be lost when reinstalling.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• DVD drive does not work in Vista Home Premium

  This is a fairly new computer with Vista Home Premium and the DVD player has never worked and HP the manufacturer can't help me.  It seems that something is missing as a decoder I thought to be a part of Vista

  Hi ck111000,

  Thank you for using Vista answers Forum.

  Fact the show drive upward in the 'Computer' window (start > computer)?
  Are you an error you may post in this forum?

  Here is an article that your problem:

  "Your CD or DVD drive is missing or is not recognized by Windows or other programs"

  http://support.Microsoft.com/default.aspx/KB/314060

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is the FTP service is no not part of Vista Home Premium

  Hello

  I have preinstalled Vista Home Premium (32 bit) on my laptop. I can not find the ftp service in my machine. What is the problem. I tried to do this

  Go to the---> programs control panel and features---> click on "turn Windows features turn on or off.

  But I'm not able to find the title of the IIS Ftp services.

  I want to use FTP, how to activate it on my machine.

  Thank you very much

  Hi Sql_oracle,

  The FTP service is only available with vista business and ultimate edition.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Center not included in Vista Home Premium on laptop Wal Mart.

  Is there a way to install WMC on a Vista Home Premium machine if it was not included in the original installation?

  Is there a way to install WMC on a Vista Home Premium machine if it was not included in the original installation?

  Are you sure he isn't here?

  Excerpt:
  Windows Media Center is included in Windows 7 Home Premium, full, professional and business publishing; and Windows Vista Home Premium and Ultimate.

  Source: http://www.microsoft.com/windows/windows-media-center/get-started/default.aspx

  Try this first:
  Start button > Search box, enter ehome > doesn't show eHome upward at the top left?
  If so, click on it > scroll to find ehshell.exe > until it clicks. This is your exe Windows Media Center.

  If you don't REALLY have it...
  Download Windows Media Center 2009:
  http://www.BrotherSoft.com/Windows-Media-Center-270441.html

  t-4-2

• Service Pack 1 will not download on vista - home premium.

  Running Windows Vista Home premium 32 bit.
  It was working fine until I tried to intsal Service Pack 1 through Windows install after having been invited by windows that he criticized the update.

  It won't let me run the SP1. It is at a standstill at halfway through the system registry. Please tell me how to run undate SP1.

  See you soon

  How to install Windows Vista SP1

  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Perhaps others can suggest ways to help with this.

  https://OM.one.Microsoft.com/OPA/validation.aspx?storeid=57d2f336-6a91-4936-a0ac-bf64ae6547c9&LocaleCode=en-us&JavaScriptOn=Yes

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• Vista Home Premium Screensaver Aurora and the energy of Windows

  Since 3 weeks I have had really bad luck with 2 of your screensavers and my 4 graphics cards. I'm not sure what kind of screensavers guys do but 2 named Aurora and Windows energy should never have been released to the public without testing, including the impact on your GPU and overheating.

  In the last 3 weeks I was troubleshooting problem vista Home Premium 32 - bit Windows and freezing issues. Card provided with the computer was GeForce 6150 TO work for about 2 months and then computer began to do bad things, freeze, stop, don't work sometimes and some other questions. I thought it was bad GPU so I replaced it with my HIS ATI Radeon X 1950 Pro, this card gave me warnings 12 hours after it has been installed that card is running a little hot and the ATI software will lower FREQ map. This card lasted about 2 days and he died too, but this time model would be just weird points and not whole screen is unreadable. I installed the program called the fan speed to monitor and record what is happening with this card. Computer has been used for business only IE and a few other small programs where ran, no games or anything. Since my last card was fried I replaced it with my GeForce 7900 GT OC, this card gave me the nice amount of needed data, but at the same time, this card lasted only 3 days.

  I thought as the fans run at full speed and becomes pleasant cooling perhaps is the PCI-E slot which is a short or something, wrong.
  Today I went to the store to buy PCI card, got nice $65 GeForce 6200 and plugged in, the fan speed is ready to record everything, Idle temperatures where 41 C for 47 of the CPU and GPU. I was doing some defragment and antivirus, trying to run the CPU at 100% and record what is happening that I was also running Media player and other programs with Visual effects to see if I can push this cards Temp. above its limits, after 2 hours of messing around with this, I gave up and is gone to smoke a cigarette, returned screensaver has been running (Aurora btw) off and checked the temp. Newspaper.

  Fan speed showed warning and GPU temp to 85 C. Then I then and tried the same thing on the screen saver Windows energy and got the same results, just go inside the screensaver and clicking on Aurora screensaver will bring your cards temp at least 5 c in a second.

  Since I do not use Vista (and will never) on my home computer, I was wondering if someone with the GTX 200 series can try and test this point and see how many temp. changes on his rig during this operation. I my rig with windows XP pro and don't know if I can get Aurora or energy of Windows XP to test it on my GTX 260 sli.

  Thank you

  I would check the power supply. A screen saver will NOT cause to burn three cards. MCDST
  A founding member MCITP - technician Support Enterprise-
  MCTS - Configuration Vista - Charter Member
  MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
  MCITP - Consumer Support Technician
  MCTS - Windows Server 2008, Active Directory Configuration
  MCTS: Windows Server 2008 Network Infrastructure configuration

• Operating system of Windows Vista Home Premium 64-bit and Web folders

  I have a person how contacted me via his personal computer.  The laptop runs Windows Vista Home Premium 64-bit operating system.  He tries to use his web folder.  The system is up-to-date on all Microsoft Patches, including Service Pack 2.

  When you try to add a network folder by using the network location feature add to create the web folder a message occurs the link is not valid not a folder.    However, I know a valid folder because it works on Windows Home Premium Service Pack 2 32-bit very well.

  Yet once, why he does not on Vista Home Premium Service Pack 2 64-bit?  Y at - he of the additional fixes that do not appear on the Microsoft Update?

  I also have the same problem. The KB907306 does nothing for my system.

  Any other ideas?