Vista - I get error 80070652 and 652?

Similar Questions

• Whenever I try to update windows Vista, I get error 8E5E0408 and 0x8000FFFF error how to fix?

  Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414>

• Impossible to update of the supplements of platform for windows vista, I get error code8007371B

  I could not update all supplements platform since 13/01/11 for 32-bit vista, I get error code 8007371B in case of failure, no idea what this means? and how can I solve this problem

  Hello

  see if that helps

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007371b/78ca99c3-FA84-404D-A52A-2bd74b2dba74

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• I keep getting error 646 and 643 codes when my computer tries to update. How can this be repaired?

  My computer suddenly used to install some updates and I get an error 643 and 646 code, please help?

  Error 646 - see: http://support.microsoft.com/kb/2258121

  Error 643 - see:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Use the above as a guide to resolve the problem.

  This allows to check what versions are actually installed-

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  Order of relocation:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  You can try just as appropriate repair only the versions of .NET Framework concerned.

  Downloads for the framework:
  http://msdn.Microsoft.com/en-us/netframework/aa569263.aspx

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Cannot install Vista SP1 - getting error code: 0x800F0826...

  I'm trying to update my computer toshiba with SP1 and SP2 on Vista Home Premium, but I get the following installation was not successful error code: 0x800F0826... Please advise!  Thank you.

  1. it fails during the installation...
  2 - no changes were made to the computer to my knowledge... I was never able to install SP1.

  Windows Update error 800f0826 is displayed when an update for Windows has failed to install and prevents you from installing additional updates. Error 800f0826 does not identify the update that caused the problem. The update that caused the problem will display a different error. This problem affects only the updates for Windows and does not prevent you to install or to automatically receive updates for other Microsoft programs, such as Microsoft Office System. Ref: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800f0826

  Please check updated code and the previous error and post back with the details of the same.

  Thank you.

• I got the msg BOOTMGR and the ctrl + alt + delete does nothing. Is there a way I can use my Vista to get a download and transfer to start to recover my Win 7?

  Can I use the Windows Vista download for use on my Windows7 restart/recovery? Geek Squad does not gives me a recovery disk when I bought the Win7 Dell Inspiron. The Win7 has shown with the BOOTMGR msg. I understand that if I get a msg to the computer placed in a mode F8, I can recover. Can U please help?

  Hello

  Problem is you on an installation of Windows 7, so you should post in the Windows 7 forums.

  Don't forget to contact Dell Support because they have methods to address this issue.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ---------------------------------------------------------------------------------------------------------------------------

  The methods below will show you how a repair disk to try to solve this problem and
  can be done on any computer with a CD burner running XP, Vista or Windows 7 as the
  process uses no files from the host computer. See "If you need a disk:"below. ".
  
  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you need a drive:

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.
  
  How to create a Windows 7 - use OPTION TWO system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Reference Dell inspiron 1521 reinstall windows vista sp1 getting error code 0 x 80070057

  I'M JUST TRYING TO INSTALL WINDOWS VISTA SP1 DISK ON DELL INSPIRON 1521 AFTER CRASH AND GET ERROR CODE 80070057 0 X, WINDOWS WILL REINSTALL OR REPAIR CAN NOT GET ONLINE, NEED HELP

  Hello

  I suggest you follow the steps in troubleshooting section below and check if it helps:

  Error message when you try to install service packs or updates of Windows on a Windows Server 2008 or Windows Vista-based computer: "ERROR_INVALID_PARAMETER(0x80070057)."

  
  

  http://support.Microsoft.com/kb/2469239

  Hope this helps,

• Cannot download updates. Get error 80070490 and 8024200 D.

  I tried for several days to download updates from windows, but all I get is error 80070490 and 8024200 D important.  I also tried REGSERVO to try and resolve errors but without success.

  Code error 0x8024200D is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

• Get error 80070490 and 80242006 codes while Windows updates

  Original title: I get errors with the windows updates.

  I get errors with the windows updates. Updates KB937286, KB2443685 KB971029, KB2467659, KB2296199, KB2442962, KB2436673, KB2423089, KB2305420

  All codes error 80070490 (unknown) then KB2416400 has error code 80242006. Don't know what to do!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform operations from the links below and see if it helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: «0 x 80242006»

  Hope this information helps.

• I am trying to download Windows updates but get error 80070641 and 641 codes

  I am trying to download updates and receive the error 80070641 and 641

  Original title: problem downloading of updates

  Hello

   
  1. are you aware of any hardware or software changes, prior to the beginning of the question?
  2. the updates you are trying to install? (Number of KB)?
  3. you try to install the updates manually or Windows updates?
   
  Follow the steps mentioned below and check.
  Method 1: Temporarily disable the security software.
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Method 2: Correct the problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 3: I recommend placing the computer in a clean boot and then try to install Windows updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx
   
  Reference: the problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
   

• I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

  try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

  Hello. It worked for me:

  1. download and install 7 - zip;
  2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
  3. then double-click AppleApplicationSupport.msi and install;
  4 install everything except iTunes;
  5. install iTunes;
  5. it must be .

• During the reinstallation of Windows Vista I get error code: 80004004 for KB978601.

  do reinstall Vista got the error code on article KB978601 80004004

  original title: error 80004004 KB978601 code how to fix?

  Hello

  Follow the steps and check if it works.

  What exactly are you trying to do?

  Step 1:: put the computer in a clean boot State before updates

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Step 2:Download and install the update manually.

  http://www.Microsoft.com/download/en/details.aspx?ID=21697

  If the above fails, try resetting Windows Update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Install Vista SP 1 - error 0x8007000D, and al Code.

  I have a laptop HP (HP Pavilion 6707us) comes with pre-installed Vista (32-bit). It has been necessary for me to do a system restore on my laptop using the "F11" key and now I am trying to install updates, I get several errors, not only with the updates but also many other errors. I wonder if all my problems are due to the fact that I can't get Vista SP1 and other updates installed? I spent the greater part of the last 2 days trying various things I found in the forums and so far nothing worked. The exact steps I take are the following:

  1. I have downloaded and run the reset Windows Update Tool and tool system found at (http://go.microsoft.com/?linkid=9665683) update

  2. I downloaded and and ran the update found at (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=b4d90b06-c27d-4483-bc1f-04d43fa7b293) system preparation tool

  I tried to install SP1 even once, does not.

  3. I downloaded and saved on the desktop Windows Vista SP1 from the recommended link (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

  4. I have installed Windows Vista SP1 in clean boot Mode, follow these steps...

  a. click 'Start', type: MSCONFIG in the search box and press ENTER.

  b. click 'Services', check the box "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).

  c. click 'Start', click 'Disable all', click 'OK' and restart the computer.

  I tried to reinstall again and received the following error message:

  "An internal error occurred during the installation of the service pack. Error code: 0x8007000D. See http://go.microsoft.com/fwlink/?LinkId=101139 for more details

  I'm really at a loss here and could use very little help. Another major problem, I have, it's that the system keeps telling me that my version of Windows is not valid, even if it has been validated on the Microsoft site and HP has confirmed my key. In addition, one minute my sound works and the other, he says that there is no audio device installed? All these problems may result from the inability to install all the updates?

  Any help would be greatly appreciated.

  Hi D_Clary,

  I suggest to follow the steps below and check if this can help you trouble the Windows Vista service pack 1 problem on your computer.

  Method 1

  Access the link below and follow the steps proposed by Darin Smith MS on 9 November 2007 and try to install Service pack 1 on your computer and check if it helps.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/78a4e88c-2786-4871-97C8-e98e35d06b1f

  Method 2

  You can runSystem File Checker (SFC scan) on the computer and try to install Service pack 1. The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows, the System File Checker utility analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompts, the following line and press ENTER: sfc/scannow

  When the analysis is complete, try to install Service Pack 1 for Vista and check if it installs successfully.

  Access the link below for more information about the System File Checker tool

  http://support.Microsoft.com/kb/936212

  Also, try to temporarily disable the security software of the computer and try to install Service pack 1 and check if it helps. Later, re - enable security software after installing Service pack 1.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to install the Vista SP1, getting error 800F0900 Code

  I'm unable to install service pack 1 for Windows Vista. It will go almost to the end of the installation, and then the error pops up.

  I installed system update readiness tool.

  I have rebooted background intel transfer serv, cryptograph serv and windows update.

  I tried going through windows update, but would not yet spent 0% of the dl. So I tried a few Fixer windows update and still the same thing.

  I've done the cmd as administrator and did the sfc/scannow, and he says there are errors that it is impossible to repair.

  I tried to make the findstr/c: "[SR]" windir\logs\cbs\cbs.log>sfcdetails.txt and retrieve a FINDSTR: cannot open windir\log\cbs\cbs.log.

  Then I tried c:\logs\cbs\cbs.log Notepad and get back that the system can't find the path specified.

  My laptop came with Vista on it so unfortunately I have no disk to work with.

  I have no answer why you cannot install SP1.

  My answer is on your trying to open the CBS.
  You have not correctly the command line.
  It's... notebook C:\windows\logs\cbs\cbs.log
  Copy and paste the command line instead of typing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.