Vista not completely loading. Solved w / system restore, BUT...

Similar Questions

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >
   
   

• Share of software Flip does not completely load due to not write the script of window installation package

  Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

  Hello hedubang,

  Thanks for posting on the Microsoft answers Forum.

  I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

  Start the program in safe mode

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

  To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

  929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My laptop does not completely load

  I have windows vista and the computer starts up and goes to my homescreen but finish loading so I can't really do anything. I tried to restore but made sure he will not load even that much more. What should I try now?

  Hello

  1. you receive a specific error message?

  2. have you made any changes to the computer prior to this problem?

  Method 1:

  You can try to start the computer in safe mode and check if the computer starts correctly.

  You can see the following link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  You can follow the steps mentioned in the link.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  It will be useful.

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• After the removal of the malware, no program shows up & not able to perform the system restore.

  original title: System Restore problem.

  I had some kind of malware, a few weeks ago.  I finally managed to get rid of it, but none of my programs, such as Excel, etc. make their appearance.  I tried to use system restore, but it does not actually perform.  I have restore dates showing, but when I try to restore it all is here.

  Let's see here:

  Method 1: How will check if the applications are located in C:\Program Files help?  Excel would not be listed in C:\Program Files anyway.

  Method 2: Which will not help as it is not this that sfc/scannow does.

  Of course, you don't want to throw a Safe Mode and the clean boot in for good measure to check if that helps?

  If you don't recognize the issue and at least have some clues how to solve, why post anything at all (except to include links to KB articles that help at all).

• No instillation disk, not restart, won't white system restoration, black screen cursor

  I have an Acer Aspire 6935
  Yesterday I noticed the volume wasn't working (fantasy on the left volume controls) I've had this problem before and turn off the laptop and remove the battery for a minute and start again to fix it.
  I went to do this yesterday, but before the laptop is turned off, the DVD Acer Arcade poped place and installed something (it's already installed so it can be updated?), very fast, so fast that I could not cancel.
  Arcade entertainment screen popped up functioning normally, so I pulled out of it before the laptop finally shut down normally.
  After taking the battery and wait a minute (to fix the volume) I turned on my computer laptop back.
  At startup, I got this message: windows do not close don successfully, please choose one of the following values: safe mode, safe mode with networking, safe mode with command promt and start windows normally.
  I tried all of this, but all I get is a black screen with a mobile slider white in the Center.
  I then tried a system restore, but I was told that I had no restore points! I know that I had because I've used this feature before.
  I then ran a start-up repair and diagnostic tool windows memory, which came back everything works normally.
  I also ran a full system restore, but I got the message "no locations valid no could be found" I received no instillation disk with my computer because it is supposed to be in the computer already.
  I don't know what to do :(
  any help would be appreciated if

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://support.Acer.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Normally, Acer is Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Not completely loading of SWF

  I have a flash 8, as Web 2.0 site that loads SWFs into a clip of content. Everything works well except for my photo gallery. The swf file does not completely load on the first click. But if you click on the gallery button a second time, it's all charges. In addition, once inside the Gallery, I have a gallery_container clip that loads the different photo albums. They also generally do not charge completely on the first click.
  
  My SWF files do not have frames after the load and display the image, so I don't know why it is not end of the action.
  
  I tried to solve this problem for weeks. I would really appreciate the help.
  
  Here is the site where you can see this problem in action:
  
  http://www.soultoneamps.com
  
  Click "enter".
  
  then "Gallery".

  I solved this problem. If she is here for anyone else who might encounter the same problem:

  I had too many complex elements of loading in an image and in a single layer. Even if I got a stop (); in this image, all items not can load on the first click.

  I changed my fla file as a button is added in a progressive frame and layer at a time. Worked like a charm. Yay!

• Facebook: ssl_error_illegal_parameter_alert and does not completely load friends comments

  often we get the above error.
  Games won't load - and now messages from friends are not completely loading.
  I have reset FF - uninstalled - and reloaded. Now, I suffer from withdrawals of Scrabble.
  Help!

  A few other users have reported that the error 10 days ago.

  • Possible problem with Kaspersky: I have updated FF26 and get the following error message "Secure connection failed" why is that?
  • Cause unidentified: Facebook games does not, the error message was even SSL rejected a unacceptable content handshake message. (Error code: ssl_error_illegal_parameter_alert).

• Firefox and Safari are not completely load some sites, but Chrome is. Why?

  Tonight, I noticed that some Web sites have been does not completely load on firefox. I tried to use Safari to see if it was a firefox problem, but he had the same problem. However, when I loaded the sites on Google Chrome it worked fine.

  I tried to reset firefox and clear cache, but it did not help so I uninstalled and reinstalled but it still doesn't load these web pages correctly. This just shows that constantly trying to load and pieces of the site are missing or broken. I'm on a Mac using Mountain Lion. I've updated the Java plug in, but it does not seem to have done anything to improve the situation.

  Alternatively, you can try to disable IPv6.

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Microsoft Office 2007 student does not completely load

  I tried to get my Office 2007 student 60-day trail to load but it get back to me with the message:
  Microsoft Office Student 2007 is not completely load.

  Please can someone tell me what to do thanks

  Hello!

  Here is a user to user of Toshiba forum and I think that it is a problem of Microsoft. Then I would contact Microsoft technical support.
  There may be something wrong with the website or something.

  Good bye

• I turned on my computer and everything was gone, even the start menu is empty. It is not let me do a system restore. That's happened? How should I do?

  It is not let me do a system restore. That's happened? How should I do?

  Use the safe mode system restore or create a new admin user account

• Why my phone was telling me my copy of windows and not authentic after two years? I tried a system restore but it did not help

  Why my phone was telling me my copy of windows and not authentic after two years?

  I tried a system restore but it did not help

  Hello

  1. Windows you receive not genuine error?
  2. Did you do any software or hardware changes on your computer before the show?
   
  Follow the below mentioned article:
  Genuine Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)