Vista print error - local document returned - cannot print

Similar Questions

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• I get the message error "this document cannot be printed.

  When you try to print a pdf file, I get the message error "this document cannot be printed. The problem is when I switch to another printer.

  Hello

  OK, consider to reinstall Adobe Reader. First uninstall it and then reinstall.

  If this did not help then in the print dialog box, make sure the "Print to file" checkbox is not checked!

  Make sure that you have selected the right printer and try to preview before print see if it shows anything be it for printing?

  Have a look here

  https://www.Adobe.com/support/techdocs/333236.html

  Hope above can help,

• Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I see that this error code has been resolved.   I have a few questions on this topic tho.  Loop here, is where the fun begins.  If i see this exact problem in my hosted cloud envorioment.  The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server.  They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC.  On-site printing has the success rate of 100%.

  Here are the mistakes I see:

  Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.

  Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  Where I am confused, is that I have no driver installed on the server.  they are all drawn in front of the user login local machine solange.  With printing works fine locally.  Uninstalling the drivers will make them any good?  or where should I be looking next?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Error 2: The system cannot find the specified file. Even after restarting the Printer Spooler service

  I tried all of the suggestions posted and have had no success in restarting my print spooler. Help, please.

  Original title: I tried to restart the print spooler as directed, and he returned the error 2: the system cannot find the specified file. He does that and is it fixable?

  @Winston Microsoft M committed Support Engineer 'expert '.

  I can see your response that you did take the time to reproduce the problem and then try your own ideas to check if the problem persists.

  Here is what I suggest to you, so you can learn how XP actually works:

  Start in the XP Recovery Console or Safe Mode, so Windows File Protection does not run.

  Rename your file c:\windows\system32\spoolsv.exe you can remember (such as spoolsv.bak).  Now, the file is "absent".

  Restart normally.

  Then try to start the Print Spooler Service and you will see the error.

  So why don't you follow your own advice and run SFC and troubleshooting automated (as you suggested) and check if the problem persists.

  Please report your results.

  When you see that it does help and that SFC does not replace the missing or damaged file (in the system32 folder) and that the automated troubleshooter does not help, will sing it a different song (we hope).

  Don't forget to rename your spoolsv.bak to spoolsv.exe when you're done messing around autour.

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055

• XP Pro printing error "client machine: \\TOOLSHED.» Error code Win32 returned by the print processor: 53 (0x35). "

  I have two PCs connected to a "2wire gateway" I got ATT.  I can read and write files to write to the network, but I can't print from the remote computer or client.

  Hi KennethBurns,
   
  -Are you connected to any network domain? If so, contact the system administrator to solve this problem.
   
  Here's a similar post on this issue. Follow the suggestion given by "Afzal Taher - Support Engineer" to solve this problem:
   
  Error code Win32 returned by the print processor: 2147500037. Error__ not specified
   
  Note: The suggestion given in the link is applicable for the Windows XP operating system.

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

  Original title: I can print from other programs such as Gimp, just not windows live photo

  When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Before troubleshooting, I have little information on the issue.

  1. what type of image file?

  2 are you facing this problem with specific program or all programs?

  3. did you of recent changes to the computer before this problem?

  4. What is the serial number and model of the printer?

  Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

  Method 1: Print a test page:

  http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

  Method 2: Why can I not print?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

  Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

  http://www.GIMP.org/webmasters.html

  Reference link:

  Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

  It will be useful.

• How do I restart the Vista Printer Spooler

  original title: someone please explain how to restart the spooler printer under vista and not print just a link.

  Hi I need to restart the printer spooler.  Please do not post links to microsoft help.  Tell me how.  someone said to go to the Control Panel, administrative tools then... but I don't know which section?   Cannot find administrative tools.  where is he?  I looked under printers, etc.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Vista print spooler stops

  The print in Vista spooler stops when I try to print. He said the strategy adopted by the DEP. All printers disappear. I have to manually restart the spooler service (it is set for the recovery of the car) and it can print for a bit, but the spooler stops again.

  Hello

  Since it is a DEP issue with a printer that could be a problem of IE (which concern Explorer and other functions of the system),
  a spooler problem, or both. Frankly I don't know that I have 1 but I'd probably use these
  Methods.

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  ====================================
  ====================================

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Epson Stylus Photo RX420 with Vista printer driver problem

  I have an Epson Stylus Photo RX420 Series all in one printer, copier and fax machine which worked perfectly on my old Windows XP computer.

  Unfortunately this XP computer has failed recently so I've upgraded to a new PC running Vista.

  When I try to install the Vista printer recognizes the device and research initially drivers preloaded to find the printer driver.

  He says so I need to use Windows update to download the right driver which I allow then (which is consistent with the information available on the Epson site that says I need to use Windows Update to get the correct driver).

  Windows Update, then go online and find the pilot, but finally errors saying installation fail due to a timeout problem.

  I have no other problems with Windows Update install the patches, fixes, etc. They all have download and install correctly and they should be larger in size than the printer driver.

  Any thoughts on how I can get the correct driver for this printer, download and install?

  Hi IanRP,

  I suggest to download the compatible driver for your printer from the link below and check if the problem is resolved.

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=nKGrQtfEm6nklAFAU002FI5XulUnXahGGzFymQyp3UZx8RYU003D&TC=6

  If this does not work, try to connect to the Windows Update site. To do this, visit the following Microsoft Web site and install all updates.
  http://windowsupdate.Microsoft.com/default.htm

  You can check the link below:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• 6500e710n (vista) printer go sleep, I only sprained by unpluging.

  6500e710n-z (windows vista) printer goes into sleep mode and can only be awakened by disconnecting the power plug back.  Power button does nothing.  He can't wake up with the computer.

  @erw4wfi - you can disable energy saving mode by going to the guide installation on the front panel of the printer, go to Preferences, and then select the power save mode and disable this option. I also go to the Web Services, and then select the updates and make sure that the firmware is up to date by selecting check for update of the product.

  @ erw4wfi and jdelich, I'd also sure that the printer is plugged directly into a socket wall and not placed on a surge protector to make sure that the printer gets enough power to wake up in itself. HP printers do not surge protectors because they have built-in mechanisms for safe keeping.

  The following procedure that I would try would be to make a grab for power on the printer cable.

  1. with the printer, unplug the power cord from the back of the printer and then unplug it from the wall outlet.

  2. unplug the power cord of the power supply module in the middle of the power cord leaving in 2 separate rooms.

  3. wait at least one minute.

  4 reassemble cord, plug it into the wall and then back to the rear of the machine. The printer should turn on by itself. If the printer does not power back on, use the power button on the printer.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller