Vista starts, the Startup Repair tool works for hours, even in Safe Mode

Similar Questions

• Computer still needs to use the Startup Repair tool

  Original title: my computer still needs to use the Startup Repair tool and I did a full scan of my computer and nothing came, so I don't know why I always have to use the Startup Repair tool

  I have windows vista

  Hello

  ·         The Startup Repair succeeded?

  ·         You receive an error message or error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: I suggest you do the startup repair using the Windows Vista disc and check if that helps. Consult the following link for the Startup Repair.

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if that helps.

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Blocked in the Startup Repair tool computer

  My computer is stuck in the Startup Repair tool.  If I manually shut down and restart, my only options are f2 or f12, no f8.  Otherwise, it goes directly into the commissioning of repair and that it is tempting to repairs and it may take longer and the time to do it.  It has been well over 4 hours.  Help!

  Hello

  Press F2 - (BIOS/CMOS) settings and changing the boot order on the hard drive in 1st position.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• In the Startup Repair tool, cause first mistake.

  In the Startup Repair tool, root cause of the error, C:\ntoskrnl.exe boot critical file is corrupt. Repair action: repair of files. Results: failed. Oxå error code.  Shows only to restart after update.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/8c265592-1da4-4AF4-A8AE-c30825116e7d

  Read the info on your problem at the link above; and the tips there on how to fix this.

  See you soon. Mick Murphy - Microsoft partner

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Vista won't start do not and the Startup Repair tool suspended

  Hello

  I just came across some problems with Vista.  I initially became a problem with my network card that he was unable to start the driver.  I made the mistake of unistalling thinking Vista would be to reinstall it when it restarted.  Since then it crashes just as soon as he gets to the start screen.  He did the same in all modes of security and restore last known good configuration.  I dug my CD and tried to do the Startup Repair.  He gets through loading files, but when it gets to the screen where you choose your language input method, etc., it freezes.  I can't even NumLock to switch on the keyboard, it seems to be completely hooked.  I think I installed SP2 and my CD is probably only SP1, so I think that may restrict some of my options.  Any help is appreciated.

  Thanks for the help.  I ended up out of the network card and could come out in safe mode, and then in normal mode.  Get that far, I plugged the card back and all was well again.  Not sure why she needed a time-out or why that hung near the top of Vista via the CD.

• Loop continues with the Startup Repair tool

  Whenever I turn on my laptop (Dell Studio 17 which is using Windows Vista), it executes the Startup Repair and then says it can't find any solution to my problem so I click on finish and it stops. It never gets past that point. This problem has come completely out of the blue!  I have nothing connected to the USB ports, and I recently downloaded software or updates.

  The details of the problem are:

  Problem event name: StartupRepairV2

  Signature of the problem 01: AutoFailover

  "' 02: 6.0.6001.18000.6.0.6001.180000

  ««03: 2»»

  "'04: 65537.

  "' 05: unknown.

  «"06: CorruptFile»»

  ««07: 3221226021»»

  "" 08: 3

  «' 09: WrpRepair»»

  ""10: 1168.

  If there is a solution in which I lose any of my files, it would be greatly appreciated!

  Thank you

  I suggest you start troubleshooting with the following diagnostic tests.  They will save you a lot of time and grief if there is a hardware failure, and you have records on site in case you need it in the future:

  H/W Diagnostics:
  Please start by running the diagnostics bootable hardware:
  http://www.carrona.org/memdiag.html (read the details at the link)
  http://www.carrona.org/hddiag.html (read the details at the link)

  Post back with the results of the tests and we'll go from there. -John ( http://www.carrona.org/index.html )

• New quad dv6t-7000 is suspended in the Startup Repair tool

  New quad dv6t-7000.  three times starting is suspended in the Startup Repair.

  If it is a hardware problem how can I get repair in Golden, CO?  Have been waiting for an agent to always.

  Hey Richyoung,

  Since the sound of it, I have assumed that the hard drive is faulty / failed. Try to run self test on the drive construction. Here's how: http://goo.gl/pVHxW

  -Sean

• Pavilion dv6700: Pavilion laptop computer under Vista: Windows does not start, the Startup Repair cannot fix it. What to do next?

  Hello
  My laptop seven year old made me proud til yesterday, but now it does not fire upwards. Instead, it hangs for a minute or two (black screen, no HARD drive light blinks, nothing), while it charges to a screen with two options - either start the system restart or start Windows normally. The second option takes me around the loop again. The first option tells me that it cannot fix the problem automatically. When I display the error details, it lists all of the tests, as adopted successfully, but ends with the words: "Root cause found: failure so that the Setup program is underway.

  I'm sure I know why she fell: two days ago, I left all my files on a portable player and defragmented the disk. The idea was to speed up the machine and get it running like new. He immediately started to hang when connecting, so I thought, well I'll go for a complete restoration of the system. I followed the procedure using the disks provided with the machine, and that's when it stopped working completely. I felt that this was more than the aging than HARD drive could take.

  My attempts at rejuvenation have actually caused his untimely death? Or is there a difficulty - something I could undertake?

  Or should I just bite the bullet and go and buy a new machine? When everything (screen, keyboard and trackpad) worked so well, it seems a shame...

  Any help or thoughts welcome. Thank you

  If you really want to resurrect, you could certainly purchase a new hard drive and try to restore the system of work using the recovery media - but then, even if it did work, you would have still lost all your data, settings, and applications in the process - and having to reinstall all your applications everywhere again.

  Hey, don't feel bad, I'm guilty of this too - has recently attempted to resurrect an era Tablet XP PC so that it can run Win10!  He went from XP to Vista, Win7, for Win8 - and along the way, gains of new memory and drives hard - but the Win10 bet was too.  So, I got to a "give up to use it.

  However, I also kept a cell phone 5 year alive by replacing the HDD with a SSD and adding more memory.  So now it is faster than ever, it has been and works like new.

  But... He has NO touchscreen, there no USB3 ports, it doesn't have 1 GB ethernet - and the list goes.

  Thus, it works very well for what we use it for - but it can't really be upgraded, so sooner or later, we will have to replace it.

  Everything depends on how much you need 'new' - touch screen, stylus, handwriting, camera, 3 USB ports, display port jack, HDMI ports... etc.

• Startup Repair has worked for a long time, saying: 'attempt to repair' can I stop him?

  Ran the Vista system, the installed files recovery, asked to connect, file froze, closed system, says no hard drive found.  Set recovery disc has chosen once again, startup repair and it worked for about an hour without any action.

  Check:

  http://www.Vistax64.com/crashes-debugging/289617-Startup-Repair-cant-cancelled-still-running.html

• STARTUP REPAIR HAS WORKED FOR 3 DAYS COMPLETE

  I HAVE WINDOWS 7 ULTIMATE WITH A 750 GB DRIVE WHICH IS ABOUT 95% COMPLETE

  MY MACHINE WORKED CONTINUOUSLY FOR MORE THAN 3 DAYS.

  STUCK IN THE MODE OF STARTUP REPAIR.

  WHEN I HIT THE "CANCEL" BUTTON, I GET THE MESSAGE:

  "The repair operation cannot be cancelled.

  How long should I make it work?  Or should I thow attention for wind & pull the plug?

  Help!

  Unfortunately you still cannot run chkdsk on the drive operating system without re-booting, but be able to start in

  Safe mode may allow other troubleshooting procedures to take.

  Even being able to restart successfully in Windows Start\Shutdown options could help. Assuming that the HARD drive is

  not in default.

  -There may be another way to complete the audit, but as far as I know of is to boot in another operating system from a different HARD drive.
  One of the Linux OS are sometimes recommended and can be run from a bootable USB key
  (I have never tried this, so can't give details).
  With the machine running on another OS, you can run chkdsk on the problem of HARD drive without having to reboot.

  Another option to start-up (F8) is worth a visit-
  -In the display boot options, select the option - "last know good configuration" (or a similar phrase).

  -There's also a possibility the Master Boot Record is damaged. If you have a Win7 installation disc you can
  Boot the disk and fix the MBR from there-

  http://www.SevenForums.com/tutorials/20864-MBR-restore-Windows-7-master-boot-record.html

  .

• Win 7 does not start, the Startup Repair says corrupt amdide64.sys

  I uninstalled my ATI Catalyst Control Center, which forced a restart.  The reboot takes me to the windows startup repair which fails to solve the problem.  The log shows that theamdide64.sys is corrupted.  The options don't help me.  For example, I have no recovery points on this computer, then that option does not work.

  There was a post on the forums who suggested using the win7 install disk and choosing the repair option, but who also wants a recovery point and will not work.

  What else can I try?

  Hello

  You probably won't be able to run the repair facility, since you can't boot into Windows at all.

  Since it's disk about the best way to back up your data, would be to put the hard drive
  in another computer as a 2nd drive (best method) or "possibly" in a USB external box (less
  likely to work in this case). Or the other may allow you to copy the data to a removable such as
  CD, DVD and other USB units. Of course a real store of the computer or the manufacturer of the system can help
  with data recovery. There are professional data recovery companies even if these services are
  generally expensive.

  There are bootable discs, such as those who use linux, which will start and you could save
  the data.

  Hiren Boot CD
  http://www.hirensbootcd.org/

  Rescue Kit Trinity
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  System Rescue CD
  http://www.SysRescCd.org/Main_Page

  Knoppix
  http://www.Knoppix.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion stuck in the Startup Repair tool

  Hello. I have a HP Pavilion 1d21ca g6. I think he was under windows 7. I started to have problems with a blue screen that pops up a few times during commissioning, but the computer has always continued to start. I think that the blue screen that says only he there had mistakes, if this is the first time continue to start. Then yesterday, the computer was not able to start. I got a black screen that has start windows normally or launch start the repair. I tried to start windows normally, but it got stuck on a gray screen. Then I tried to launch the start of repairs which lasted a whole day and seems never to end. I tried a few times, the same results. I wrote this, I turned the laptop upside down to look down, and now it won't even turn. My daughter received this as a Christmas gift last year and it was barely used. I used to write documents for the University and I need information out of it. I hope that someone can help you.

  Thanks for responding. I tried this as well and the power was restored to my laptop, but the first problem has always remained. I found myself there are clips and the technician said that the hard drive is damaged. It's still under warranty so they will replace the drive. I hope that no more problems! Thanks again.