Vista to Server 2008 workstation

Similar Questions

• Can I run Virtual PC Vista Home host and Server 2008 R2 comments?

  I am running Windows Vista family in a workstation with 2 GB of RAM, 1.2 Ghz Intel Core Duo. I would like to run Virtual PC to install Windows Server 2008 R2. What do you think it will work ok?

  Thank you.

  You * can *-really, the question is "Why would you?" because the server would be limited (severely) by bothe, VPC restrictions and those of the home edition. This is a configuration of (very) not supported.

  So not the areas and very limited display features.

  Many of you also on the low side of the RAM in the configuration or vice versa - I recommend at least 3 GB so that you can didicate at least 1 GB at the prompt, and still have room to move around in the host. You can allocate the guest at best - even if WIn7/ServerR2 is less expensive RAM than Vista.

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the server pack 1 SQL server 2008 on Vista

  When I installed the pack Server SQL server 2008 1 on Vista machine, I got error code 84B 30001.

  Hello

  It comes to the installation of vista operating system instance

  Try the SQL server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Can someone tell me if I can add a new column in the Explorer of Windows Vista or Windows Server 2008?

  Hello

  Previously in Windows XP and 2003, IColumnProvider is available using which it was possible to add a new column to Windows Explorer Details view, but with the removal of this API, the new columns are is not displayed in Windows Explorer on a Vista or Windows 2008 Server. It is said that there is a new concept of property system. So I would like to know if it is possible to implement something similar uses of property systems.

  These forums are for end users, rather than developers. You must use the MSDN Forums to get this kind of information.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• RDP of Vista professional for 2008 Server error

  I'm running Vista Business SP2 tent to connect to a Server 2008 SP1 via Remote desktop (rdp client 6.1) but after entering my user name and pw I get the following error.
  An of authentication error code: 0 x 507.
  Remote Desktop is enabled on the server with allow the connection of any version of selected remote desktop.  I can connect from an XP machine very well.  It is therefore something with Vista.  Any ideas?

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  The question you have posted is related to connecting to a Server 2008 and would be better suited to the Discussion Technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

  They should be able to help better the Forum answers is related to the question of consumer.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I restore my laptop to Vista using my D drive, even though I have Server 2008 running on it now?

  My Gateway T-1616 laptop comes with Windows Vista Edition Home Premium on it.  I installed the beta version of Windows 7, when it first came out.  When the beta ran out, I installed Windows Server 2008.  I now want to restore the originally Vista laptop using the recovery partition (drive D :).

  How can I do this?

  I tried to use: Support technique Gateway .  But, this doesn't seem to work.  The indications are assuming that the computer has installed Vista.  This isn't.  There now Server2008.  TheOptions system recovery screendoes does not include an option forRecovery Manager .

  The three options I have on the screen "System Recovery Options " are:

  (1) System Image recovery

  (2) Windows Memory Diagnostic

  (3) command prompt

  How should I proceed?
  

  My Gateway T-1616 laptop comes with Windows Vista Edition Home Premium on it.  I installed the beta version of Windows 7, when it first came out.  When the beta ran out, I installed Windows Server 2008.  I now want to restore the originally Vista laptop using the recovery partition (drive D :).

  How can I do this?

  I tried to use: Support technique Gateway .  But, this doesn't seem to work.  The indications are assuming that the computer has installed Vista.  This isn't.  There now Server2008.  TheOptions system recovery screendoes does not include an option forRecovery Manager .

  The three options I have on the screen "System Recovery Options " are:

  (1) System Image recovery

  (2) Windows Memory Diagnostic

  (3) command prompt

  How should I proceed?
  

  Hey JHollingsworthAZ

  support of Gateway contact by mail or phone for instructions on how to use the recovery partition or to buy a vista recovery disc reinstall vista

  Walter, the time zone traveller

• Move the user profile on Windows XP/Vista/7 for Windows Server 2008 R2

  We set up a Terminal Server Windows Server 2008 R2 server in a network. The plan is to move all profiles of Windows XP/Vista/7 user machines to this new server.

  Is it possible to automate the passage?
  Thank you

  This question goes a bit beyond the scope of this forum.  Here, we help Windows users having problems with files in their family environment of Windows.  Server gurus hang out in the TechNet forums, and if anyone knows a solution to your problem, they will be.

  http://social.technet.Microsoft.com/forums/en-us/categories

• Installation of Windows Server 2008 R2 on vmware workstation 9

  Hello

  I have a laptop with windows 7 OS and installed a VM with windows server 2008 R2 OS using vmware workstation 9. The thing is without creating any user, VM is turining IT with the user that I connected my laptop. Is that how it behaves.

  Generally, when install us windows server on a physical machine, he asks to open a session with the administrator by changing the password.

  Could someone let me know how to change this?

  Thanks in advance

  This problem occur if you select the OS install disc when the VM... in this way creating the VMware Workstation uses a feature called Easy Install, where you will be asked for more information, including the user credentials.

  To avoid using Easy Install, during the creation of the VM, on install, select "I will install the operating system later":

  

  To read more about Easy Install, check page 35: http://www.vmware.com/pdf/desktop/ws90-getting-started.pdf

• Newbie needs help in the installation of Visual Studio in Windows Server 2008 in a new virtual machine created in Workstation 9

  I'm extremely new to VMware and hope this is the right forum for a question as fundamental.

  I created a new virtual Workstation 9 machine and have installed Windows Server 2008 as the guest OS.  Now, I would like to install Microsoft Visual Studio 2008 in addition to that from a USB key.  How can I get the virtual machine to see the USB so that I can run the autorun.exe installer?

  Thanks for the tips.

  Thank you anthonyrr.  That's what I was looking for.
  I want to score your like the right answer, but I don't no where to do it.  Needs to be done by the administrator of the forum?

• Complete restoration of the Server 2008 R2 vmware workstation for windows backup image 9

  9 workstation.

  I am trying to restore a backup of windows server r2 2008 (made with the built-in windows backup) on an existing installation of vmware server 2008 r2. Basically, I just want to replace the facility with the backup version.

  The problem is, the windows to the backup image is on a USB key.

  The restore process is:

  1. Connect the usb host drive
  2. Insert the windows server r2 DVD in drive
  3. initialize the Server 2008 r2 comments and press the button ESC at startup, then boot from the CD
  4. Select 'repair' installation
  5. but here's the problem, windows backup image is on my USB, but at this stage I do not see the USB key from the client in the repair installation process.

  Ideas of the best way to do it?

  Thank you

  Okay, downloaded the ISO Image of Windows Server 2008 R2, created a new Virtual Machine, added the Windows Server backup and made a full backup without the destination for the backup drive, a USB Flash drive.

  Started the virtual machine of the ISO Image and it does not see the backup from a USB Flash drive, although I can see it from the command prompt.

  Also created a record gross hard pointing to the USB Flash drive and started the virtual machine of the ISO Image and he does not see the backup of the hard disk gross of the Flash USB drive, because the Virtual Machine had problems during the boot process.  Forget the exact error message, but I tried as a whole disk and a partition.  So the why I tested it by copying it to a normal file depending on the disc hard virtual (and worked).

  Finally I created a regular file based hard and copied the backup folder of the USB Flash it and then started the virtual machine drive of the ISO Image and it had no problem see the backup from the normal file based hard.

  It seems that you have to take the long way around, but at least, you should be able to see!

  I know not when booting from the ISO Image or a disc of Windows Server 2008 R2, backup tools command line are available to restore the image however you could examine the issue.  I would like to but I just don't have the time at the moment.

  Post edited by: WoodyZ - modified comment re: Raw Disk

• Windows Server 2008 r2 and Workstation 7

  Windows Server 2008 r2 and SQL 2008 usable on Vmware Workstation 7?  What would be the best configuration to run both applications. on a virtual machine pre-installed?

  Yes - Ih ave this exact configuration - although the installation of the machine hosting the VMWorkstation is powerful enough.

  Just create a Windows 2008R2 VM on my computer and go ahead and installs SQL 2008 top.

• Cannot install VM workstation 7 on Server 2008 R2

  Hello

  I tried after downloading the evaluation version (7.0.0.0 - 203739) to install it on a server running Windows server 2008 R2 standard edition x 64 (new installation).

  It stops just at the beginning with the message "error, this product cannot be installed on windows XP or later, Windows 95,98, Me, NT, 2000 are not supported"

  But it says on the datasheet of the VM workstation 7, it can run on Windows server 2008 R2 x 64 as host operating system.

  (server is core I7 860 for development and I am connected with admin right through tsc)

  Anay idea what I am doing wrong?

  Thank you

  Frank

  shame on me - I mixed the build numbers.

  You can post the installation log files?

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary