Windows 8 - frequently does not work properly in suspense/questions

Similar Questions

• My Windows Media Player does not work properly

  Windows media player seems to have stopped working, I can listen to music and look at my photos, but when I drag some songs to the burn list, it does not burn, and when I try to burn my pictures, it will start to burn, then it stops, the drive opens automatically and it says no more to check the drive or to check the disc that I use. Help, please!

  Hello
   
  1. you have any CD/DVD burning software installed on the computer?
  2. did you try to burn a different CD/DVD or any other program to burn the disc?
   
  Method 1: Make sure that the CD - R or CD - RW drive is recognized as a recordable device
  To make sure that the CD - R or CD - RW drive is recognized as a recordable drive, make sure that the recording tab appears in the properties of the CD/DVD drive:
  1. click on start and then click on computer.
  2 right-click the CD - R or CD - RW drive and click Properties, and then look for the recording tab.
  3. choose the appropriate settings.
   
  Method 2: It is not usually necessary to adjust the burn speed unless you encounter problems at the fire; in this case reduce the burn speed may fix the problem. This setting applies to all burners that you use with your computer.
   
  Visit this link to change the settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player
   
  Once the settings are changed, try to burn the CD/DVD and check the result.
   
  Method 3: If the problem persists, disable all non-Microsoft programs and try to burn the disc to cross check if none of the programs is the origin of the problem.
  To disable Microsoft not services, follow step 1 perform a clean boot: http://support.microsoft.com/kb/929135
   
  NOTE: Don't forget to follow step 7 reset the computer to start as usual
   
  For more information on the CD/DVD burning, check out these links:
  1 burn a CD or DVD in Windows Media Player.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  2nd burn a CD or DVD in Windows Media Player: frequently asked questions.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Post back with the results, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows backup program does not work properly, can not format blank media.

  Successfully, I formatted the drive using autoplay.  However, when I try to run the backup program on the formatted drive, I get a prompt to format the disc again after a few minutes, I get message that format could not be completed.  Is it possible that the window backup program is corrupted?  If so, how should I do?

  Successfully, I formatted the drive using autoplay.  However, when I try to run the backup program on the formatted drive, I get a prompt to format the disc again after a few minutes, I get message that format could not be completed.  Is it possible that the window backup program is corrupted?  If so, how should I do?

  I had these problems and many others using DVDs to make the backup of files.

  Please save you time sitting in front of the computer, the power to the machine with the DVD and the aggravation of not working do not after all.
  Invest in an external hard drive for backup of files. It is the most effective way.
  These days, a 1 TB external hard drive can be had for less than $100. It's money well spent.

• Windows gadget icon does not work properly

  When I put text as 'small' size (under control panel-aspect-display), "CPU meter" gadget work properly with nice icon.    However, if I set the size of 'medium' text, the gadget "CPU meter" icon turns into 2 ugly boxes.

  I am using Windows 7 32 bit.

  Please help and thank you for your time.

  Hi Regina,.

   
  Thanks for the status update.
   
  CPU meter icon that shows the CPU usage and load will appear ugly/blurry when you increase the size of the font in the middle.
   
  The problem may have arose the possible reasons:
   
  1. all by increasing the size of the font, the user can enabled the option of Let me choose a level of scaling for my monitors.
   
  2 and the option to change the size of the text was disabled due to the previous option being checked.
   
  As the gadget supports only two sizes and because of the options as there are bad for you.
   

  I suggest you make changes only with the change only the text size.

  Also, you can post the screenshot of the question:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4
   
  An update on the status of the issue.
   
  We will try to help you.

• Modules window opens but does not work properly

  It started a year ago when I got FF 2.0 and I thought it would be itself correct when I updated to 3.6, but it didn't.

  I have several add-ons that I wanted to delete. When I click on uninstall, they stopped working and the window Add on said that they would be removed to restart FF, but they do not and are still visible after a year or two.

  I have no script and wanted to turn once to see if it interfered with another program. By clicking on the button disable nothing to do, so I have to click on uninstall then it stops working, and then click on disable to activate again.

  If I click on Options onno the script, it crashes FF and I have to use the Task Manager to get out of the FF.

  Is there a way to put this back in working order?

  I don't know of a fix for this, but you can try creating a new Firefox profile:

  http://support.Mozilla.com/en-us/KB/managing+profiles

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Microsoft windows live mail 2011 does not work properly

  Original title: "I'm on windows7 and my windows live mail 2011 does not work correctly." I think that the best way to get there is to uninstall and reinstall... Please provide clear instructions on how to proceed. Any better ideas? »

  I'm on windows7 and my windows live mail 2011 does not work properly. I think that the best way to get there is to uninstall and reinstall... Please provide clear instructions on how to proceed. All the best ideas?

  Ask in the Windows Live Solution Center Mail Portal. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• This device does not work properly because Windows... this device. (Code 31)

  Hello buddies, how to solve this problem (code 31)

  USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  How can I solve this problem?

  In addition, you can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Button hardware on Samsung slate Windows 7 does not work properly in Windows 8

  After you install the official update of Windows 8, the hardware button windows does not work properly. button lock display as well.

  Whenever I restart the system, everything works fine, until you put the sreen of. If you re-enable the slate (just energy), the buttons Don t work.
  Thus, windows hardware button offers just a double click to change the windows, but doesn´t take you of the subway home and the screen lock work doesn´t button at all.
  Someone at - it a solution for this problem? Would be nice, because I think that all the samsung slate 7 users have this problem.

  Hello. I don't know if you have this problem, but as long as no one have answered your question.

  I had exactly the same problem and after following the advice of the official windows samsung 8 upgrade support the Tablet worked perfectly.
  Just follow this link (http://www.samsung.com/us/support/win8upgrade/) and download the software to the 3rd market. It will install a lot of software and hardware upgrade for your Tablet and if it doesn't work as well for me it will solve all your problems.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.