VLAN SRP527W do not talk to each other
Hello everyone,
I'll keep it simple for the sake of the discussion.
I have a SRP527W router that is connected to a switch L2 (a TP-Link... I know, it's not a Cisco...). and a PC and a printer connected to the switch. Now, I want to have the PC and the printer on 2 VLANS.
I created 2 VLANS on the PSR (192.168.1.0/24 and 192.168.2.0/24) and I assigned the Lan 1 port at a time. The RPS is a DHCP server so I have SRP 192.168.1.1 and 192.168.2.1 installation provides IP addresses to the 2 VLAN.
I have Setup VLAN 1 and 2 switch, 2 port assignment in the VLAN 1 and VLAN 2 3 port (port 1 is the trunk and connects to the SRP).
When I start the PC and the printer they get their correct addresses from VLAN respective (PC: 192.168.1.30 and printer: 192.168.2.30) but for the sake of Odin, I can't see the printer from the PC. ESP was Inter VLAN routing active. Moreover, the switch has address 192.168.1.2
What I am doing wrong?
Thanks for the ideas, you can provide.
-Mike * start things in the Office *.
No problem at all, don't send me an email. We can get something set up maybe tomorrow.
-Tom
Please mark replied messages useful
Tags: Cisco Support
Similar Questions
-
Windows Vista &; Palm Centro 690 do not talk to each other
After my other phone went through the washing machine I changed to this Palm unit. Active, came home and installed the synchronization software, worked well. A few days later tried to synchronize again, no luck. I'm working on for a few weeks trying to get it working again! I talked to the local office of Verizon, they suggested that I talk to a technical support. Them, spent more than an hour on the phone with them the uninstallation of the software, called again, download the new software, once again, still nothing, done a reset and a format and still nothing. Have been using the Palm as a normal phone and that's fine. I was unable to figure out what to do. I even talked to Hp technical support, is not their problem! talk to the people of palm. So here, I looked through your forms but did not find everything that is related to the Centro and Vista. I'm almost ready to try anything that seems reasonable.
Thank you, who finally did the trick, don't know what the difference is / was, but I don't like as it works again. Next time I try a synchronization, I'll try the front USB port and see what happens. Gluton for the trouble I guess!
Once again, thanks a lot for your help. He is LARGELY APPRECIATED.
kenz5103
Message relates to: Centro (Verizon)
-
Cannot get 2 nodes VM talk to each other on OEL7
Greetings-
I intend to install RAC 11 GR 2 on OEL7. I got the Oracle VM operational machines. I can access the internet successfully without any problems. If I'm on the node-1 and ping its IP address, it also works very well.
But when I try to do a ping of virsa node-1 node-2 and vice, I get the message cannot.Here is my configuration of hots of installation:
[oracle@racdev01 Desktop] $ cat/etc/hosts
Loopback #.
127.0.0.1 localhost.localdomain localhost
# Public
192.168.56.71 racdev01.localdomain racdev01
192.168.56.72 racdev02.localdomain racdev02
# Private
192.168.10.1 racdev01 - priv.localdomain racdev01-priv
192.168.10.2 racdev02 - priv.localdomain racdev02-priv
# Virtual
192.168.56.81 racdev01 - vip.localdomain racdev01-vip
192.168.56.82 racdev02 - vip.localdomain racdev02-vip
# SCAN
192.168.56.91 rac - scan.localdomain rac-scan
192.168.56.92 rac - scan.localdomain rac-scan
192.168.56.93 rac - scan.localdomain rac-scan
Rattling, public and private maintains for lack of node-1 node-2 IPs and vice versa:
$ ping racdev02
$ ping racdev02-priv> > My network:
Node-1: Ethernet (enpOs8) = > 192.168.56.71 (public)
Node-1: Ethernet (enpOs9) = > 192.168.10.1 (private)Node-2: Ethernet (enpOs8) = > 192.168.56.72 (public)
Node-2: Ethernet (enpOs9) = > 192.168.10.2 (private)
This is the configuration for my 3 adapters:
I tried for days to get these 2 nodes to talk with each other. I would really appreciate your help to solve this problem... I can't installing RAC, unless I get these machines talk to each other...
Thank you very much!@AJ
First of all, thanks to you all for the heads up, I tried your suggestions, which was a good experience of troubleshooting since I am just a DBA not a network Admin however, I solved the problem and I share the solution below.
Initially after a successful installation of OEL7 on Node1, I did not perform a fresh install of OS OEL7 on Node2, instead, I took the short cut by saving Node1 via VM - Box > file > Export device and then reimported into a new host name & configured network connections accordingly. But, since a clone of Node1, Node2 machines will have the same MAC address and so they may never talk to each other because I understand is the address MAC is what distinguishes them from material level. Now, you should have a good idea what is my problem...
There is a quick fix & fix liked - the longer fix would have been to install a new OEL7 on Node2, the miracle solution is below which I was working with success:
1 I changed my MAC address last 2 digits for all 3 node-2 and make unique cards and not the same addresses MAC on Node1 because they were copied from Node1.
2. to: VM - Box > settings > network > adapter 1 > advanced > change the 2 digits of the MAC address here also with the same 2 numbers I did on step 1
3 step 2 apply for Adapter 2 and 3 of the adapter, but make sure you use the same last 2 numbers you did on step 1 for Adapter 2 and 3 of the adapter
Exp: 1 MAC adapter: 08:00:27:96:72: 85 -adapter 2 MAC: 08:00:27:96:72:86 - 3 MAC adapter: 08:00:27:96:72:87 > Note: they must all be unique and different from MAC @ on Node1
4 on Node2 > Terminal > cd sysconfig / >
, you should see, in my view, enp0s3, 8 and 9 may be different numbers according to your configuration. But once you change each of them, you should see a setting called [HWADDR] Exp: mine was: HWADDR = 08:00:27:96:72:84 - then I changed to the same number, I put it in step 1 above - to: HWADDR = 08:00:27:96:72:85. Apply the same changes & 5 restart services network as follows: service network restart - may have to restart...
6 if everything is done correctly above, you should be able to ping both machines of vice versa - I could
7 nothing succeeds like success! It took me 2 days to understand this point, but it was worth. I learned so much by testing a few things around. The other way is to perform a new installation of OEL7 on Node2, modify the connections accordingly and you don't need to mess with MAC address at all...
I'll be happy to set up a small video or post screenshots so you can see it working.
Please note, I've looked all over youtube BOF CARS on OEL7, most 2 knots BECAUSE I fell on were on OEL6.5 and below. I've seen some autonomous 12 c on OEL7, but no 12 c CARS on OEL7. If there are out there, please post the link. Now, I had 2 machines to talk to each other, I will perform with installation 12 c CARS on OEL7.
See you soon
@AJ
-
Can I allow an application for one person on my family share but does not allow for each other?
You can't delegate who has access and who doesn't have access to the applications. You can lock devices with age restrictions, so only items appropriate age are at their disposal. Or you can hide your list purchases. The purchased app can then be displayed when you want to share with someone else, then be hidden again once the application is downloaded on their device.
I hope this helps.
SI10
-
How to get 2 vm talk to each other?
Guys,
I'm on a 64 bit Windows 7 machine. I have VMWare Workstation 7.1.4 and I try to get 2 Windows 7 64 bit VM to talk to each other without network connectivity. At present, we have setup the network adapter for the two virtual machines as host only, and also two Windows firewalls are disabled.
We put the IP (192.168.1.1 and 192.168.1.2) manual on both. We connected to both and tried to do a ping to another, but it times out.
What do we lack?
TIA!
In order to do a ping, let the firewall is turned on in the Win7 guests and allow ICMP traffic in the advanced settings in their firewall settings.
André
-
Can we have three VM servers with software very often talk to each other.
Hi, I'm new user who started looking for in VM yesterday. I have a requirement where I would like to split a server using VM in 5-6 servers. I would use a VM to install SAP R/3 IDES, another to install SAP CRM IDES, third to install BO and the fourth where I access these three applications. These three programs should talk to each other very frequently. Please let me know if this is possible. These three will be will have separate IP address?
Please also let me know that all the software are required. If I can get VMware free so what's the advantage with VMware eSphere which cost a lot (for personal use).
This I do for the self-study that I need to install 2-3 software on separate machines so please be easy on the cost.
I suggest buying a Dell/HP/IBM server 1 Quad Core with 8 GB of RAM and a SATA drive at least 2.
Check compatibility on http://www.vmware.com/resources/compatibility
With 4 cores and 8 GB of RAM, you can run all your VMS and something else (like the gateway VPN or TS, a domain controller for your Windows environment,...)
André
-
With Movieclips talk to each other
Hi all.
I can't try to have a video clip to talk to each other. Essentially, I nested within a movieclip buttons. I want to do is have it such that when one of these buttons is activated, it tells an another movieclip I have on the stage to move to a certain range.
So currently I have two clips on the stage - navStart and navArrow. I have a navStart button that reads:
function goMoviesArrow(Event:MouseEvent):void {}
gotoAndStop (1);
navArrow.gotoAndStop ("movies")
}Now when I click on the button I get an error message that there is an access of undefined property navArrow. I understand why this is... it is because in the movieclip navStart... There is no such thing as navArrow. So, how can I say that it resembles navArrow who is back on the main stage. I tried things like:
parent.navArrow.gotoAndStop ("movies")
and
stage.navArrow.gotoAndStop ("movies")
but in vain.
So, how can I get these movieclips to talk with each other?
The zip file is attached...
Try:
MovieClip (this.parent).navArrow.gotoAndStop ("movies")
-
Hosts of inside do NOT speak to each other - Pix 506, Pix 515E
Good Morinig, everyone,
We have Pix515E and Pix506E, both are configured to pretty much the same: IP private networks inside, entering NAT for web/SSH servers for access. The problem is: inside hosts can not access these servers with NAT translation (cannot ping, cannot http, can't ssh). I thought that they are all the same network and will not affect the pix firewall, but why they don't communicate with each other? We used to use CheckPoint and never have such a problem for private network access intra-problem:
(a compendium see the running-config below): >
Result of the firewall command: 'show running-config '.
: Saved
:
6.3 (3) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
names of
name 192.168.1.100 PrvEcommerce
name import 192.168.1.150
name 206.246.202.19 import-outside
name 209.96.203.2 gateway-cnf
the name 209.96.203.21 shark
name 206.246.202.22 SU-PC
name 192.168.1.50 su-pc
outside_access_in list access permit tcp any host 206.246.202.20 eq www
outside_access_in access-list deny shark host tcp everything
outside_access_in list access permit tcp any host 206.246.202.20 eq 3306
outside_access_in list of access permitted tcp 209.96.203.0 255.255.255.192 host 206.246.202.20 eq ssh
outside_access_in list of access allowed icmp all 206.246.202.0 255.255.255.0 echo
outside_access_in list access permit tcp any host 206.246.202.21 eq www
outside_access_in list of access permitted tcp 209.96.203.0 255.255.255.192 host 206.246.202.21 eq ssh
outside_access_in list access permit tcp any host 206.246.202.20 eq https
outside_access_in list access permit tcp any host import out eq www
outside_access_in list access permit tcp any host import out eq 819
outside_access_in list access permit tcp any host import out eq 3306
outside_access_in tcp access list refuse a whole
pager lines 24
ICMP allow any response of echo outdoors
Outside 1500 MTU
Within 1500 MTU
IP outdoor 206.246.202.18 255.255.255.248
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM PrvEcommerce 255.255.255.255 inside
location of PDM 206.246.202.20 255.255.255.255 outside
location of PDM 192.168.1.200 255.255.255.255 inside
location of PDM 192.168.1.2 255.255.255.255 inside
location of PDM 206.246.202.21 255.255.255.255 outside
location of PDM 206.246.194.0 255.255.255.0 outside
location of PDM 209.96.203.0 255.255.255.0 outside
location of PDM 209.96.203.0 255.255.255.192 outside
location of PDM import 255.255.255.255 inside
location of PDM import-outside 255.255.255.255 outside
PDM bridge-cnf 255.255.255.255 out place
location of PDM 255.255.255.255 out shark
PDM location su-pc 255.255.255.255 inside
PDM 255.255.255.255 out SU-PC slot
location of PDM 10.1.1.0 255.255.255.0 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global (outside) 2 206.246.202.57 - 206.246.202.62 netmask 255.255.255.248
Global 1 interface (outside)
Global (inside) 8 su-pc - 192.168.1.200
Global (inside) 4 192.168.1.10 - 192.168.1.240 netmask 255.255.255.0
NAT (inside) 1 192.168.1.0 255.255.255.0 0 0
public static 206.246.202.20 (Interior, exterior) PrvEcommerce netmask 255.255.255.255 0 0
static (exterior, Interior) PrvEcommerce 206.246.202.20 netmask 255.255.255.255 0 0
public static 206.246.202.21 (Interior, exterior) 192.168.1.200 netmask 255.255.255.255 0 0
public static 192.168.1.200 (exterior, Interior) 206.246.202.21 netmask 255.255.255.255 0 0
public static import import-outside (Interior, exterior) mask subnet 255.255.255.255 0 0
public static import (exterior, Interior) import-outside netmask 255.255.255.255 0 0
static (inside, outside) pc-su - SU-PC netmask 255.255.255.255 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 206.246.202.17 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00
: end
All suggestions and ideas are greatly appreciated.
Sean Chang
What IPs try internal users access? 192.168.1.x or 206.246.202.x?
I don't fully understand your situation, but your NAT Setup is very weird. I've never used "global (inside)..."
If users try to get to 192.168.1.x, try to remove these lines:
static (exterior, Interior)...
Global (outside) 2...
Global (inside) 8...
Global (inside) 4...
-
AE and creation of talk to each other?
It's a shame all the characteristics of one are not included in the other, and perhaps they will one day but until then...
I want to output images high resolution of the R3D files.
First allow me to adjust the parameters of ISO metadata, AE is not (or I forgot how?)
Æ allows me to output to a resolution which is not first. Then.
I would like to import a R3D file in first, adjust the ISO, then open it in AE and export still images. All this without first, then re - export import into AE...
How do I do that? And this metadata adjustment will transfer more to AE?
Enough, please
See this page for an overview of the ways to make a difference in both directions between After Effects. There are many ways, each have advantages and disadvantages.
> First allows me to adjust the parameters of ISO metadata, AE is not (or I forgot how?)
Please explain exactly how you do this. I'm not aware of any difference between After Effects and Premiere Pro in terms of what changes you can make to the ISO for the source files metadata.
This page describes how to use XMP metadata in After Effects.
> AE allows me to output to a resolution which is first
What is the size of the image you export to?
-
Two servers in the same vlan, DMZ can be firewall with each other?
I have a Windows server vm on a DMZ, and I need to add another soon. We need to separate these two servers so that neither can see the other, but they must be on the same vlan. I'm looking for in vShield, but do not have this installer again. VShield will be able to separate them, or someone has a better suggestion?
Hello
Ah, your physical switch uses VLAN private for your guests. If you use a distributed virtual switch, you can configure one by VM PVLAN allowing entrants but no communication between the nodes.
If you are using VMsafe you can achieve the same thing using the policy that denies the communication to the VM in VM virtual machines via subnet blocks but allows access from your firewall.
VMsafe and vShield Zones are two distinctly different firewall technologies. vShield Zones is a firewall device VMsafe-net is located just before the vNIC on penetration or just after on the output of the vNIC. Each of the different problems, but for this use case, VMsafe can be the best way to go.
If you do not have an Enterprise Plus license then you cannot use the virtual distributed switches so PVLANs may not work for you.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]
Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]
-
My friends do not receive the xbox one and I am. I would still be able to talk about them on the 360 via the xbox one. Thank you.
Hello
It is not a community forum for Xbox.
Try these resources to the Xbox:
Xbox forums: http://www.xbox.com/en-US/forums
Main problems Xbox: http://support.xbox.com/en-US/browse?product=xbox-360
Xbox contact us: http://support.xbox.com/en-US/contact-us
Don
-
ESXi 5.5 - VMs cannot talk to each other
I have a single host ESXi 5.5 in one of our offices abroad. Virtual machines on it cannot ping or otherwise to reach out to the other (RDP, etc.). However, other hosts can communicate with the virtual machines and virtual machines have full out communication - can ping their DG, other addresses, etc.
The host is a Dell 510 with two network adapters configured on the vSwitch, which is set up at the HP 2510 G - 48 as a trunk. The VLAN is the tag and set up on the single vSwitch with the hash of the IP-based routing.
I tried to disable one of the network cards on the switch to see if it makes a difference and also to disable the firewall on virtual machines (all virtual machines are running Win2008R2 - a domain controller and Exchange server and machine monitoring PRTG), also with no luck.
There is only one port of the VM group and a group of unique management ports.
Virtual machines can ping on the ESXi host.
Is there any other information I can provide to help diagnose this problem?
Thank you
Kurt
Hello
We have seen this behavior in clonned VMs, however in most of the changing scenarios the VMXNET to E1000 vNIC solves the problem.
Please check the followng KB which has information on this behavior, and the patch from microsoft for the guest virtual machines.
KB.VMware.com/kb/1020078
-
Flex application and component talk to each other?
Hi all.
I have built on a large flex project and try to condense a little downwards out of the code and put it in the individual components. Can I call then. Not only to reduce the number of lines of code, but to also make it easier to make improvements, and if others get involved with the project that they may be charged a component rather than all of the code. In my view, it is logical to try to work this way.
I should point out that I am using Flash Builder 4.
To try it, I worked on an example.
What I hoped to do, it is to pass variables and the values of a component to the main application, is it possible?
That's what I've tried but I get an error the main code can not see the text field in the component.
Code in the main file
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = minHeight = "955" "737" height = "600" width = "470" xmlns:ns1 = "*" >
< s: states >
< name s: State = "on" / >
< name s: State = "two" / >
< / s: states >
< fx:Declarations >
<! - Place non-visual elements (e.g., services, items of value) here - >
< / fx:Declarations >
< fx:Script >
<! [CDATA]
private function btn_submit (): void
{
If (txt_user.text = 'Hello')
{
currentState = "two";
}
on the other
{
currentState = "a";
}
}
[]] >
< / fx:Script >
< s:Label x = "10" y = "10" text = "Test Log In on component" width = "717" textAlign = "center" fontWeight = "bold" fontSize = "18" / >
< ns1:Loginform = "190" x y = "71" >
< / ns1:Loginform >
< / s:Application >The component code
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:fx s:Group ' http://ns.Adobe.com/MXML/2009 "
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx" width = "400" height = "300" >
< fx:Declarations >
<! - Place non-visual elements (e.g., services, items of value) here - >
< / fx:Declarations >
< s:TextInput = "53" x = "62" width = "298" id = "txt_user" / >
< s:Button = "281" x = "92" label = "Button" click = "btn_submit ()" / >
< / s:Group >I don't know if I want to do (spend data from a component to the application main and rear) is possible.
If someone could develop on it, I would be grateful!
If the "publishName" of the component property is writable, then Yes.
Two solutions:
-First if you always use the same file name:
-So if you want to change it, you can always use:
And then in the Script code:
myRecorder.fileName = "myFileNameOrWhateverStringHere";
If the property is not writable, because it has no Set accessor, you must provide one (that is if you can change the code of the component).
-
My laptop computer and printer do not communicate with each other.
I went to "printers and devices in the control panel and my laptop has an icon of troubleshooting beside him. I tried to search for updates/drivers solve the problem and nothing works. It says ' unknown device is not a driver. My fax, copier and scanner work, but the printer does not work because there is a problem with my laptop. I could not use my printer because I was out of ink for 2 months, then I buy ink and now I can't print! Ink for a Lexmark is not cheap.
I hope someone can help!
Karen
Because my printer is a Lexmark, I had to go to the Lexmark he site and search "Drivers" under which specific printer, you have it downloaded on my computer and loaded this way to connect my laptop with my printer.
-
Can't get 2 computers to talk to each other
Hello
As the title says, I can not get a PC Windows Vista Home Premium to connect to a Windows XP Home Edition computer.
The reason why I need to do this is to share a PRINTER and configure it to connect to the XP.
The Vista and the XP they are in the same workgroup, I have an administrator access on both of them.
On Vista, it has a password that I know.
Now the problem starts,
On the vista network folder, it shows my router, printer and the computer itself.
On XP, I click on the view workgroup computers and I click on the Vista PC. Even if it shows here, it says that the network location is not found.
How can I make them work somehow?
Thank you
Hello
Did you change your computer?
I suggest you to see the links and check.
Windows wireless and wired network connection problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Networking of computers running different versions of Windows
Maybe you are looking for
-
iMac (20-inch, mid 2007) 2 GHz Intel Core 2 Duo 3 GB 667 Mhz DDR2 SDRAM (2 + 1 GB) El Capitan 10.11.6 OSX Hard drive Western Digital 500 GB (black or blue, don't remember who I bought) Most of the time, I can move the coursour. I can't click on anyth
-
Gmail does not work in firefox
PLEASE, I WOULD LIKE TO KNOW WHY GMAIL DOES NOT OPEN IN FIREFOX 15. IT DOES NOT COMPLETE THE LOADING OF THE PAGE. THERE ARE 600 COMPLAINTS ABOUT THIS PROBLEM!PLEASE SOLVE IT MOZILLA!
-
Update problem bios satellite A210-199
When I try to update bios for (Q 28158310)I get the error I can do maybe I can try another tool?
-
I need help from my colleagues of railroading MAC users, please. I'm about to throw my old Windows laptop that I used to run/control my layout using JAVA & JMRI for a few years. Like all other computers in the House are now all MAC, I intend to Excha
-
How to change the password to a previously used
So a family member could focus on my computer, but he intends to change back to the old so they would not be able to access when they wanted, I changed my password to the Microsoft account. I changed it back he said that I was not allowed to use a pa