Windows Vista & Palm Centro 690 do not talk to each other

Similar Questions

• VLAN SRP527W do not talk to each other

  Hello everyone,

  I'll keep it simple for the sake of the discussion.

  I have a SRP527W router that is connected to a switch L2 (a TP-Link... I know, it's not a Cisco...). and a PC and a printer connected to the switch. Now, I want to have the PC and the printer on 2 VLANS.

  I created 2 VLANS on the PSR (192.168.1.0/24 and 192.168.2.0/24) and I assigned the Lan 1 port at a time. The RPS is a DHCP server so I have SRP 192.168.1.1 and 192.168.2.1 installation provides IP addresses to the 2 VLAN.

  I have Setup VLAN 1 and 2 switch, 2 port assignment in the VLAN 1 and VLAN 2 3 port (port 1 is the trunk and connects to the SRP).

  When I start the PC and the printer they get their correct addresses from VLAN respective (PC: 192.168.1.30 and printer: 192.168.2.30) but for the sake of Odin, I can't see the printer from the PC. ESP was Inter VLAN routing active. Moreover, the switch has address 192.168.1.2

  What I am doing wrong?

  Thanks for the ideas, you can provide.

  -Mike * start things in the Office *.

  No problem at all, don't send me an email. We can get something set up maybe tomorrow.

  -Tom
  Please mark replied messages useful

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen

  Original title: green screen

  my windows Vista Home Basic Edition does not show the Office when I log in. it shows only a green screen. I tried all the options in F8 mode with no result. How can I fix it without losing any information on the hard drive?

  Hello

  1 - do you mean that you get the green screen even in safe mode?

  2 did you recent hardware or software changes to your computer before this problem?

  If you are unable to start desktop even in safe mode, then you try to perform the verification and startup repair.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• Floppy disks to install Windows 7 and the product keys are exclusive to each other?

  Floppy disks to install Windows 7 and the product keys are exclusive to each other?  Or can I use a disc that I have to restore the windows on a second laptop and activate it with a different product key?  It is not a question to find out how many users I can put in place, but whether the disk and product key are mutually exclusive.

  As long as the product key matches the edition, it should work perfectly, no exclusivity.

• Cannot get 2 nodes VM talk to each other on OEL7

  Greetings-

  I intend to install RAC 11 GR 2 on OEL7. I got the Oracle VM operational machines. I can access the internet successfully without any problems. If I'm on the node-1 and ping its IP address, it also works very well.
  But when I try to do a ping of virsa node-1 node-2 and vice, I get the message cannot.

  Here is my configuration of hots of installation:

  [oracle@racdev01 Desktop] $ cat/etc/hosts

  Loopback #.

  127.0.0.1 localhost.localdomain localhost

  # Public

  192.168.56.71 racdev01.localdomain racdev01

  192.168.56.72 racdev02.localdomain racdev02

  # Private

  192.168.10.1 racdev01 - priv.localdomain racdev01-priv

  192.168.10.2 racdev02 - priv.localdomain racdev02-priv

  # Virtual

  192.168.56.81 racdev01 - vip.localdomain racdev01-vip

  192.168.56.82 racdev02 - vip.localdomain racdev02-vip

  # SCAN

  192.168.56.91 rac - scan.localdomain rac-scan

  192.168.56.92 rac - scan.localdomain rac-scan

  192.168.56.93 rac - scan.localdomain rac-scan

  Rattling, public and private maintains for lack of node-1 node-2 IPs and vice versa:
  $ ping racdev02
  $ ping racdev02-priv

  
  

  > > My network:
  Node-1: Ethernet (enpOs8) = > 192.168.56.71 (public)
  Node-1: Ethernet (enpOs9) = > 192.168.10.1 (private)
  
  

  Node-2: Ethernet (enpOs8) = > 192.168.56.72 (public)

  Node-2: Ethernet (enpOs9) = > 192.168.10.2 (private)

  
  

  This is the configuration for my 3 adapters:
  

  

  
  I tried for days to get these 2 nodes to talk with each other. I would really appreciate your help to solve this problem... I can't installing RAC, unless I get these machines talk to each other...
  
  Thank you very much!

  @AJ

  First of all, thanks to you all for the heads up, I tried your suggestions, which was a good experience of troubleshooting since I am just a DBA not a network Admin however, I solved the problem and I share the solution below.

  Initially after a successful installation of OEL7 on Node1, I did not perform a fresh install of OS OEL7 on Node2, instead, I took the short cut by saving Node1 via VM - Box > file > Export device and then reimported into a new host name & configured network connections accordingly. But, since a clone of Node1, Node2 machines will have the same MAC address and so they may never talk to each other because I understand is the address MAC is what distinguishes them from material level.  Now, you should have a good idea what is my problem...

  There is a quick fix & fix liked - the longer fix would have been to install a new OEL7 on Node2, the miracle solution is below which I was working with success:

  1 I changed my MAC address last 2 digits for all 3 node-2 and make unique cards and not the same addresses MAC on Node1 because they were copied from Node1.

  2. to: VM - Box > settings > network > adapter 1 > advanced > change the 2 digits of the MAC address here also with the same 2 numbers I did on step 1

  3 step 2 apply for Adapter 2 and 3 of the adapter, but make sure you use the same last 2 numbers you did on step 1 for Adapter 2 and 3 of the adapter

  Exp: 1 MAC adapter: 08:00:27:96:72: 85 -adapter 2 MAC: 08:00:27:96:72:86 - 3 MAC adapter: 08:00:27:96:72:87 > Note: they must all be unique and different from MAC @ on Node1

  4 on Node2 > Terminal > cd sysconfig / > , you should see, in my view, enp0s3, 8 and 9 may be different numbers according to your configuration. But once you change each of them, you should see a setting called [HWADDR] Exp: mine was: HWADDR = 08:00:27:96:72:84 - then I changed to the same number, I put it in step 1 above - to: HWADDR = 08:00:27:96:72:85.  Apply the same changes &

  5 restart services network as follows: service network restart - may have to restart...

  6 if everything is done correctly above, you should be able to ping both machines of vice versa - I could

  7 nothing succeeds like success! It took me 2 days to understand this point, but it was worth. I learned so much by testing a few things around. The other way is to perform a new installation of OEL7 on Node2, modify the connections accordingly and you don't need to mess with MAC address at all...

  I'll be happy to set up a small video or post screenshots so you can see it working.

  Please note, I've looked all over youtube BOF CARS on OEL7, most 2 knots BECAUSE I fell on were on OEL6.5 and below. I've seen some autonomous 12 c on OEL7, but no 12 c CARS on OEL7. If there are out there, please post the link. Now, I had 2 machines to talk to each other, I will perform with installation 12 c CARS on OEL7.

  See you soon

  @AJ

• How to get 2 vm talk to each other?

  Guys,

  I'm on a 64 bit Windows 7 machine.  I have VMWare Workstation 7.1.4 and I try to get 2 Windows 7 64 bit VM to talk to each other without network connectivity.  At present, we have setup the network adapter for the two virtual machines as host only, and also two Windows firewalls are disabled.

  We put the IP (192.168.1.1 and 192.168.1.2) manual on both.  We connected to both and tried to do a ping to another, but it times out.

  What do we lack?

  TIA!

  In order to do a ping, let the firewall is turned on in the Win7 guests and allow ICMP traffic in the advanced settings in their firewall settings.

  André

• Can we have three VM servers with software very often talk to each other.

  Hi, I'm new user who started looking for in VM yesterday. I have a requirement where I would like to split a server using VM in 5-6 servers. I would use a VM to install SAP R/3 IDES, another to install SAP CRM IDES, third to install BO and the fourth where I access these three applications. These three programs should talk to each other very frequently. Please let me know if this is possible. These three will be will have separate IP address?

  Please also let me know that all the software are required. If I can get VMware free so what's the advantage with VMware eSphere which cost a lot (for personal use).

  This I do for the self-study that I need to install 2-3 software on separate machines so please be easy on the cost.

  I suggest buying a Dell/HP/IBM server 1 Quad Core with 8 GB of RAM and a SATA drive at least 2.

  Check compatibility on http://www.vmware.com/resources/compatibility

  With 4 cores and 8 GB of RAM, you can run all your VMS and something else (like the gateway VPN or TS, a domain controller for your Windows environment,...)

  André

• Can I allow an application for one person on my family share but does not allow for each other?

  Can I allow an application for one person on my family share but does not allow for each other?

  You can't delegate who has access and who doesn't have access to the applications. You can lock devices with age restrictions, so only items appropriate age are at their disposal. Or you can hide your list purchases. The purchased app can then be displayed when you want to share with someone else, then be hidden again once the application is downloaded on their device.

  I hope this helps.

  SI10

• With Movieclips talk to each other

  Hi all.

  I can't try to have a video clip to talk to each other. Essentially, I nested within a movieclip buttons. I want to do is have it such that when one of these buttons is activated, it tells an another movieclip I have on the stage to move to a certain range.

  So currently I have two clips on the stage - navStart and navArrow. I have a navStart button that reads:

  function goMoviesArrow(Event:MouseEvent):void {}
  gotoAndStop (1);
  navArrow.gotoAndStop ("movies")
  }

  Now when I click on the button I get an error message that there is an access of undefined property navArrow. I understand why this is... it is because in the movieclip navStart... There is no such thing as navArrow. So, how can I say that it resembles navArrow who is back on the main stage. I tried things like:

  parent.navArrow.gotoAndStop ("movies")

  and

  stage.navArrow.gotoAndStop ("movies")

  but in vain.

  So, how can I get these movieclips to talk with each other?

  The zip file is attached...

  Try:

  MovieClip (this.parent).navArrow.gotoAndStop ("movies")

• Palm Centro 690 - for Verizon

  Hello - I hope someone can help me - I recently received my new Palm Centro Verizon's time which I had for a week now - the problem I encounter is - there are moments that I hit the power button and it lights without problem and there are others that he did a hard reboot - WHY is it that - am I hitting something to turn off completely it?

  There was 2 times already that I have to remove battery and put back on in order to activate the Palm - and

  There has been a couple of times that I've heard almost static, noise and then it goes to a hard reboot-

  Can someone explain to me why this did that?

  Thanks for any help you can offer – I really happy with this unit but if it's something that I can't count on so I'll have to return eventually.

  Thank you all for your help - I don't have your responses so far - but one of the things I did today was to go to verizon and they does not change the phone to me.

  I'm now load - later, I call the 1-800 palm # which is free installation support - I'm nothing to do with this new blow - until I talk with someone, and they also talk through it.

  Thanks again!

  Message relates to: Centro (Verizon)

• Windows Vista Service Pack 2 (KB948465) not __will not install - constant judgment of Internet Explorer

  I couldn't after several attempts to install Windows Vista Service Pack 2 (KB948465).  I finished all of the instructions that will appear on the screen to fix this problem and nothing works.  I'm not a PC geek and want just to get this update loaded.  I hope that this will solve the constant stop my IE WHENEVER I use it.  I'm at a point where I want to just remove Vista and go back to XP.  I NEVER had a problem with it.

  Please contact something that can do a non-techie.  I look at all these forums, but I don't really know how to do all this.  So, unless there are instructions step by step, I'm a lost soul.

  Thank you

  Scappi

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step # 1 above and select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  5. right-click on the file that you saved in step # 1 b above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then reboot again.

  6. do a clean install of Norton Internet Security 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft