VLM & Vista/Win7?

Similar Questions

• Can upgrade you Dell Dimension 4400 to Vista/WIN7

  Can upgrade you Dell Dimension 4400 in Vista/WIN7?

  Meet the system requirements? If Yes, you can purchase Windows 7. If not, stick with XP.

  Windows 7 system requirements

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • Graphical device DirectX 9 with WDDM 1.0 or higher driver

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Questions after Vista-> Win7 migration

  Hello

  I have improved my T400s Vista Win7 32 bit teacher teacher yesterday, and he's NOT going smoothly. I had to start after an error message in the process. In any case, I ended up having to format my disk to preload and installed there. Coming back up, I have pretty much a generic Win7 installation, no traces of Lenovo drivers / software either. I pulled some from the companion disk and installed everything I could through the Thinkvantage Toolbox.

  Now, I have the following questions:

  1. a device called device Base system in the other category of devices, slot PCI 3 does not install. Driver not available for download. What device is, so that I can download the driver manually?

  2 rescue & Recovery is not installed. I found the Rescue and Recovery © 4.3 Sysprepbackup accessory package for Microsoft Windows 7, that's what I need?

  3 fingerprint Reader does not turn on when I boot. I have fingerprints registered, but do not receive the option after booting. How can I activate it?

  4. the windows Boot Manager appears whenever I start. Can I disable it?

  Appreciate any help!

  The Base system device seems to be the card reader, I installed it and problem #1 disappeared.

• Some problems of Vista Win7 upgrade

  Hello!
  My OS Equium A100-338 has been upgraded from Windows Vista to Windows 7.
  Since what the Toshiba Movie Factory and the Ulead MovieWriter disappeard and now she also does not recognize SD cards. I checked toshiba Web site and I couldn't find the answer...
  I have just the recovery for windows vista CD and I don't know what to do to recover the software (?), and how to solve the problem of SD card.
  I'm just a user and do not understand the ins and outs of computers...
  Is anyone out there that can help?

  Thank you so much!

  Silvia

  I agree with Akuma. There must be a compatibility issue and if these apps n t work it is the price you pay for Win7 upgrade. These additional requests from Toshiba are not downloadable, so what you can do is to use Windows Movie maker or other applications.

  What you can do, is to buy more recent Ulead Movie Maker/Writer designed for Win7.

  I checked the Toshiba download page, and there is no driver for the SD card reader. This means that you can try to use the Vista driver or Win7 update is the only driver.
  Check please the two options.

• TimeZones West Australia. Vista/Win7 with 1 HR calendar of January 6, 2010 with the Vista OS PRE.

  I am Manager of a network COMPUTER in Perth (Western Australia) and have found that appointments Outlook differ in the time of 1 hour between vista pre and post vista systems after January 6, 2010.  On vista and latest appointments are 1 hour later than XPP/W2k3 server.
  Summer time was cancelled in WA and patches released to fix.  All systems have include the hotfix KB974176 and KB976098 installed.
  I've tested with Microsoft office 2003 and office 2007 and found no change.  I have eliminated the exchange Server 2003 as I can reproduce the problem between Win7 and autonomous XPP (not on the field) systems, using the POP of an ISP email.
  I called Microsoft support, the person told me that there is probably a fix published and to call hide them if it's still a problem on the 6 January.  This person seemed unsure of things and I felt he didn't have a patch being released, but just then assumed and was told to end the call of support.
  Like any good computer scientist should be, trying to stop a potential problem before it happens (and I will be on leave on the 6 January).  With appointment problems can cost the company a lot of money if the meetings are missed.

  Is anyone able to tell me if there is a known issue, which will be a patch or hotfix released before the January 6?  Or let me know how to get in touch with the right people at Microsoft who can help me.

  Thanks in advance.

  GAV
  MCSE, MCSA

  Repost:

  Daylight Saving Time Help and Support Center
  http://www.Microsoft.com/DST2007 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista/Win7/language to XP fonts

  I know that xp is no longer supported, but there is still a lot of people who still use XP.  Specially 3rd country in the world.

  Since the arrival of Vista, the many languages of countries have been added.  In any case, we can use the Vista or Win7 for XP? Conversion without using third-party software?  Make this country appear not to be included in the language list.  Could the consumer end user add or modify one for Windows?  Example, I can choose listed Thai language and change the font and make type Indian language?  That is what MSKLC (creator of the language keyboard) is for?

  Hi TekWannaB,

  Unfortunately, it is not possible to transfer languages of Vista or Windows 7 for XP.

  Please see the list of languages offered by XP. List of languages supported in Windows 2000, Windows XP and Windows Server 2003:http://support.microsoft.com/kb/292246

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Home networking between Vista & Win7

  I'm trying to access a printer (hosted on a machine to Vista o/s) of an o/s Win7 machine on my home network.  Is networking between these two operating systems feasible?

  Yes.  These web pages have the details to help you implement:

  Sharing files and printers with different versions of Windows
  Networking of computers running different versions of Windows

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Need to transfer/copy Firefox Bookmarks from HD Vista Win7 new system.

  My Vista system motherboard is dead, so bought the new Windows 7 system and have old Vista drive works as second data drive. When you install Windows 7, installed Firefox 4.0 (had 3. XX on Vista). I want to copy my favorites to the new system.
  How can I do this?
  Thank you for your time and your help.

  You must copy a file called places.sqlite in your old folder of profile to your current profile folder. (Firefox stores the user data in the profile folder)

  For more information on how to find the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox and https://support.mozilla.com/kb/Profiles

  If you want you can copy more than just bookmarks, for details, see https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

• HP Pavilion m7775uk-a: recently upgrade to Vista > Win7 32 bit > Win7/64 bit

  I am REALLY struggling with Windows Livemail

  I lost all my emails my vistas 'Outlook Express' settings and other that I've upgraded to Windows 7 recently

  Windows livemail is now alive and active, but my 2008 computer is still slow.

  A friend told me with "the new upgrade, why don't you go all the way and do a 64-bit upgrade?"

  Easy-peasy... not really.

  What I did was buy a new 2 TB drive and 64-bit is installed.

  Now I have 2 drives with different versions of Windows 7 bootable

  Questions-

  1. How can I find and migrate all Outlook express news - signatures et al. for WIndows 7 64-bit

  2. If question 1 is not possible, how do I allow a dual boot so I can use the old disk (now called drive E) emails and others without screwing up my new system I will be upgrading to Windows 10 soon probably

  3. do I care the same all this, try all said, because why worry, just start with what I have and suffer in silence with the outstanding issues.

  Thanks in advance,

  Kal

  Dual boot with Windows 7 32-bit and 64-bit?  What to do with the BIOS or a switch.  Much easier with a switch from hard drive.

  I have one of them. ORICO HD-PW4101 3.5 "Floppy Drive Slot 4 x SATA HDD Power Switch control (black)

• DMA2200 downgrade from vista win7

  Somebody has experiences using a DMA2200 with Vista32 after using it with Windows 7 32 bit?  I just got Windows 7 last month, so I installed it on my HTPC as a trial of 30 days at first, just to see what he could do.  This machine had worked OEM Vista Home Premium, works perfectly with the DMA2200.  Two days ago my 30 day trial went upward, so I went back to Vista32.  When I set up the Extender, it indicates the PC should be updated and I go to the www.microsoft.com/extender/update, which does not exist.  I took the last updated firmware on the DMA2200 and applied several Ko I have picked on the other threads in this forum, connection error but the PC hangs just to connect, and the DMA said only: updated the PC.

  Thanks in advance

  Problem solved, it was the SP1.  I thought two days had passed, and all the critical updates came through the pipe.  I was WRONG, apparently Vista takes his sweet time.  It took this morning from SP1 and SP2 this afternoon.  Neither has been also critical, until sometimes today, and then they just rolled through another.  It not is never occurred to me I was on before SP2 I "upgraded" to W7 to test...

  Thanks for the tips!

• Dv6700 Vista-> Win7 - Intel(r) ICH8M LPC Interface Controller - 2815-Unknown Device

  Hey there, I couldn't find this one specifically for the dv6700. I had to reinstall everything, and this title was to improve the form of Vista to Windows 7.

  I tried to follow this guide:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Windows-7-upgrade-guide-for-dv6000-dv900...

  But I always came up with a problem in my device manager:

  Unknown device:

  Intel(r) ICH8M LPC Interface Controller - 2815

  Hardware ID

  ACPI\HPQ000

  * HPQ000

  I hope that this is sufficient to diagnose the problem. For another model, it seemed to be a thing of Bluetooth, but I don't think so here.

  Your help is very appreciated.

  Hello:

  Usually, it's the missing quick launch buttons driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84862-1&cc=us&DLC=en&LC=en

  Paul

• Import .reg Vista/Win7, in subkeys hidedesktopicons data damage registry XP?

  Out of curiosity, I imported DesktopIconsDomainSettingsUSE.reg of http://www.sd61.bc.ca/windows2000/Windows7/Documents.html

  in the registry of a standalone PC with XP Pro SP3 XP.

  I write the current values before the import, but I did not export the keys.

  I removed what was imported in the keys and changed the values for the keys that existed to the original values.   For example, change from 0 to 1.

  The registry is not serious?

  It is impossible to say if you did everything correctly.  To make sure he was in the way he has been, perform a system restore using a date and time before you merged the registry entries.  System Restore is best done is Safe Mode.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• Disc printer HP C4700 (xp, vista, win7) have win8.1. Failed to install. Help

  I can get the printer to work with a USB cable, but want to go wireless.  My drive is outdated, I guess.  When I open the drive, it tells me to hit "install". When I do, it closes.  I bought this desk top 6 months ago and had another internet provider and things worked fine.  When we went, I could get my lap top to work wireless, but no luck with the desk top.

  All ideas"appreciate any assistance.

  Thank you.

  YAHOOOOOOOO!  I'm back and reinstalled or downloaded installation and it's worked.  Thank you very much.  I now have my Office Wireless on my HP printer.

  I ran into the same problem that I had when I got this printer tho.  When I tried to save it, there is no (zero) selection for my C4780 printer.  Yet once I is not it.  Any ideas?  I'm not properly, call an all-in-one? C4700 series printer?  Again, no response would be greatly appreciated, and you get a big helping hand upward.  Thanks again.

• APEX 3.2 workload problem image upgrade Vista/Win7

  Homepage of the APEX is missing a few images and "connect" button does not work. I thought I followed the instructions properly for apxldimg.sql... Here is my result:
  
  @D:/apex32/apex/apxldimg.sql D:/apex32.
  
  PL/SQL procedure successfully completed.
  
  PL/SQL procedure successfully completed.
  
  PL/SQL procedure successfully completed.
  
  Validation complete.
  
  Is there anything else I need to do?
  
  Thank you, Scott
  
  Published by: svk1965 on April 22, 2010 04:35

  With the apex zip file that you downloaded, once extracted, you must pass in the path of the folder that contains the extracted folder apex (not the folder that contains the images directory) - at least that's what worked for me.

  Van
  Trent

• Tecra A10 - Win7 upgrade Vista Business edition

  Dear Forum

  I'm curious, if you please, on a Tecra A10, which, at the time of purchase, had installed Windows Vista business.
  At the latest date the owner upgraded to Windows 7 (for free I think but I'm not sure).

  Windows 7 installation has become corrupted and need a new facility, but a backup has not been made.

  Please someone knows if the owner has a way of re - download Windows 7 free of charge, taking into account the existing Windows 7 installation is legal.

  Yours with thanks in advance
  Ian

  I put t know what previous owner did somehow but if possible install clean version of Win7 and not Vista Win7 upgrade. I did it on several machines Vista and now all the machines work perfectly with the clean version of Win7 32 bit.