VM Console goes black after installing NVIDIA drivers

Similar Questions

• Satellite X 200 - 23 g - black screen after install NVidia drivers

  The problem appeared after reinstall Windows XP Professional. With installed NVidia drivers (179.28) after reboot the screen is black. System booted normally, sounds, it has played. With no installed NVidia driver picture is normal. After reading forums I understand this problem with properties of the monitor's EDID.

  Linux systems to use the UseCustomEDID property, and use received monitor EDID struct everything works fine. Windows not not a similar option. Also, it is impossible to complete the installation from a resuscitator of disc. Black screen on the final stage. To restart with the mode VGA Vista say, who is unable to complete the installation in this mode.

  Can you help me?

  Hello!

  I've never heard of this EDID you want to say, but you should use Toshiba drivers.
  Because no Toshiba driver don t have the graphics card overheating protection can overheat. The graphics card may be damaged.
  With the Toshiba drivers, you are on the safe side

  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Then try to start in safe mode, remove the old graphics driver, restart the computer and then install the drivers of Toshiba.

  Good bye

• Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

  Hello.

  I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

  I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
  The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

  The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

  Now, I can't play games or watch movies.
  Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

  I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

  If I try to put it above it is always black.
  Can someone help me?

  Thank you very much

  Hello

  First of all, you should visit this Australian page from Toshiba:
  http://www.ISD.Toshiba.com.au
  You will find all the drivers for this model of laptop.

  I checked and found that there is a BIOS v2.5.
  Check if the BIOS needs to be updated (if the older BIOS is installed)

  In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
  Install it!

  Last but not least the Win XP should be updated to the latest state!

• Portege R100: The screen goes black after installing SP2

  Hello
  Currently, I tried to install SP2 for my laptop (Windows XP pro) R100. The end of the installation procedure I restarted the system, as requested. The windows logo appeared, then the screen went black and the only thing I could see was the mouse cursor.

  After several reboots, the situation did not do better. I tried to go on safe mode, but I had the same (only this time the black backround was typical registration of safe mode on the sides). I will perform a system restore without having to install SP2, but the fact that I am on a DSL connection most of the time very important SP2 installation.

  I would appreciate any solution to this problem.
  Thanks for your time.

  Hello

  As far as I know sometimes a few utilities and drivers must be updated after installation of the service pack 2 Microsoft.
  On the Toshiba driver page I found a backgrounder update of Microsoft Windows XP SP2 that contains a few s information about the utilities that must be updated.

  However, additional I found a lot of new drivers for R100.
  I think you should also try to update the old drivers as driver utility and the graphics card chipset.
  Eventually, it helps.

• Why my monitor goes black after a minute?

  I have my standby power setting to turn off the monitor after 15 minutes when it is plugged.  But if I don't move the mouse or press a key for a minute, the screen goes black.  It's very embarrassing, especially if I watch a video.

  Is there another setting somewhere that says monitor going black after a minute of no activity?

  Thank you

  PAM

  Hi Pam,.

  Here's another setting worth it.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, adjust the time before the screensaver kicks in the drop "Wait" to a more acceptable value.  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• Screen goes black after 15 minutes?

  Hello

  I plugged my Compaq 420 on my HD TV via a VGA cable.

  Now, I love watching videos of youtube on my HD TV.

  However, the screen goes black after about 15 minutes. So I have to move my mouse to bring up the screen again.

  I thought it was the standby screen so I changed the setting to 60 minutes, but still the screen goes black after 15 minutes of watching the video.

  If I move the mouse whenever a whilte (entry reachs 15 minutes) the screen becomes black ever so I move the mouse every time some time when I look at something more than the 15 minutes. but I don't want to get up from the couch every 10 minutes so please help change me the setting so that the screen is not black.

  In Control Panel > options, click choose when turn off the displayof power "on the left side of the screen and changing the settings Never to"on battery"and"Plugged in"

  

• While watching Netflix my screen goes black after a few minutes

  E-mail address is removed from the privacy *.
  While watching Netflix, my screen goes black after a few minutes. It's something new. How can I increase the time before that happens, or eliminate entirely?
  Thank you for your help.
  Sincerely,
  Byron Johnston

  Hi Byron,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems while watching Netflix your screen becomes dark. I'll be happy to help you with this problem.

  (1) how you try to access Netflix?

  (2) you use Internet Explorer to access the Web from Netflix site?

  (3) you receive an error message?

  (4) is the issue limited to a Web site or with other sites as well?

  (5) have you made changes on the computer before this problem?

  Method 1: I suggest to turn off the screen saver and check if that helps.

  Enable or disable the screen saver

  http://Windows.Microsoft.com/en-us/Windows7/turn-your-screen-saver-on-or-off

  Method 2: If the problem persists, I suggest you to contact Netflix support for assistance.

  http://www.Netflix.com/help

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Computer screen went black after installing PES 11

  My computer screen went black after installing PES 11 download. Now what should I do?

  Try to run the application as 'Administrator' and check the performance.

• BSOD BCCode 116 - generated after installing updated drivers for ATI Mobility Radeon HD display drivers for HP Probook 4520 s 5470

  I continue to work through issues with my HP Probook 4520 that is now almost 4 years with the same problem of a frozen screen.

  Today, I decided to work in seeing if there was new ATI Mobility Radeon HD 5470 available display drivers.

  I have the version of 15/03/2011 of the ATI Mobility Radeon HD 5470.  With that came the AMD Catalyst install Manager Version 3.00.0868

  .

  During his visit the HP site I saw that they had a newer version available on the graphics card available with the date of April 30, 2011 and the download file has been identified as sp52818.exe for the Version of the graphics driver to download 8.743.2-- 110315 5A - 115833C.

  In light of the penalty, that I got with my graphic display driver 15/03/2011, I decided to uninstall the drivers of my 15/03/2011 and download the drivers of 30/05/2011.

  Doing this has my computer I notified that I already have the sp52818.exe file and so I was a little confused, but I allowed him to install over my existing file.

  To install the file sp52818.exe successfully, I went to work.  Then after some time (within an hour), I got a message generated by computer at the bottom right of my screen saying a newer version of my graphics card was available at www.amd.com .

  (first thought was - why HP had it?)

  In any case... I decided to click on the suggestion box, visit www.amd.com and see what they had.  I was directed to install a driver to automatically detect the utility, and during the installation, the utility's suggestion came back that my computer can access a new graphic display driver.  I thought it was nice and so I then proceeded to of course download the .exe file for my HP probook 4520 s.  The proposed file was qualified: 13-12_mobility_win7_win8_64_dcl_ccc_whql_exe (graphic display for the ATI Radeon HD 5470 by suggestion of AMD driver.)

  Everything goes well.  It starts to download the Catalyst install Manager Version 08.00.0915, then the ATI display drivers with > .NET Framework 4.5 (I'm just observing things that are facts).  Several times the black screen comes on, but that is to be expected.  I wait patiently, and finally I see the green bar of progress.  Just as the green bars come in the end, the screen goes black again for about 1 to 2 minutes.  Then suddenly the dreaded BSOD Blue Screen of Death comes with an error message saying that something has gone wrong and closing of windows, and he mentions something about Windows display drivers.  I'm not panicking yet, but is offered the possibility of recovering and I let the computer pick up normally, and I return to the screen of welcome with happiness and connect to.

  From the entrance, the first thing I see is a Windows Error Message, I opened and saved and here provide for our education and research.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8008E1D010
  BCP2: FFFFF88004EFFD88
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\021414-72946-01.dmp
  C:\Users\Owner\AppData\Local\Temp\WER-179057-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  * * * * *

  I'm not able to open the .dmp file to display as the file associations cannot establish a connection, and I am unable to find the AppData file under users.  Windows 7, it is extremely difficult find the files suggested by error messages.

  I would like to know why the BSOD appeared, then please explain the error message that came as I was trying to install a driver recommended for my computer using download driver acceptable practices, causing me concern and frustration, as well as the 4 years of intermittent to faithfully display failure.  I'm not sending the machine backwards.  There must be a solution.

  (Rabbit Trail - the suggestion to display the privacy statement is also an attempt to distract people to get a real fix and do believe that Windows 'help' you who isn't.)

  The laptop is running and I can see things on the screen.  It seems OK, but I'm going to face other issues?

  Thinkgal.

  VIDEO_TDR_FAILURE (116)
  Try to reset the display driver and recover from timeout failed.
  Arguments:
  Arg1: fffffa8008e1d010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: fffff88004effd88, the pointer in the responsible device driver module (owner tag).
  Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
  Arg4: 0000000000000002, optional internal context dependent data.

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  atikmpag + bd88
  fffff880'04effd88 4883ec28 sub rsp, 28 h

  SYMBOL_NAME: atikmpag + bd88

  KD > lmvm atikmpag
  start end module name
  fffff880 '04ef4000 fffff880' 04f94000 atikmpag T (no symbol)
  Loaded symbol image file: atikmpag.sys
  Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
  Image name: atikmpag.sys
  Timestamp: Fri Dec 06 15:21:45 2013 (52A231D9)
  CheckSum: 0009FEFF
  ImageSize: 000 A 0000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Bug Check 0 x 116: VIDEO_TDR_ERROR

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263 (v = vs. 85) .aspx

  You are right that the accident may have been caused by the newly installed ATI driver. I checked on the HP Site and there is a version of the same display offered with the same output driver date on the ATI site, so the difference may be that the version of HP's specific system, while the ATI Version is just generic, so my suggestion would be to uninstall the ATI Version and replace it with the HP driver.

  Laptop HP ProBook 4520 s

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Driver ATI video and control panel (VERSION from HP)
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93664_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  *********************************************************************************************************

  Drivers who have to update or delete.

  ArcSoftVCapture ArcSoftVCapture.sys Thu Dec 03 13:32:41 2009 (4B 180449)
  Driver Description: Magic - i Driver ArcSoft

  Driver update Site: Inc.
  --------------------------------------------------------------------------------------
  Impcd Impcd.sys Fri Feb 26 18:32:11 2010 (4B8859FB)

  Description of the driver: Intel® Turbo Boost technology driver

  Driver update Site: http://downloadcenter.intel.com/
  --------------------------------------------------------------------------------------
  PxHlpa64 PxHlpa64.sys Fri May 15 17:43:06 2009 (4A0DE1EA)

  Driver Description: Driver of Sonic CD/DVD (used by many different programs of CD/DVD)

  Driver update site: http://www.carrona.org/pxhelp20.html lists some of the programs it is used in.
  --------------------------------------------------------------------------------------
  RsvLock RsvLock.SYS Fri Oct 02 05:18:24 2009 (4AC5C560)
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  Driver update site: http://www.mcafee.com/us/products/endpoint-protection/index.aspx
  --------------------------------------------------------------------------------------
  These drivers appear to be the remnants of a previous installation of a McAfee product. Please run the cleaning of Macafee utility to completely remove the remnants of MacAfee.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  SafeBoot SafeBoot.sys Fri Oct 02 05:18:05 2009 (4AC5C54D
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  SbAlg SbAlg.sys Wed Nov 26 06:00:08 2008 (492D2C38)

  SbFsLock SbFsLock.sys Fri Oct 02 18:05:28 2009 (4AC5C564)

  --------------------------------------------------------------------------------------------------------------
  STREAM STREAM. SYS MON Jul 13 20:06:18 2009 (4A5BCBFA)
  No info?
  --------------------------------------------------------------------------------------------------------------
  stwrt64 stwrt64.sys Thu Sep 09 03:12:10 2010 (4C8888CA)

  Driver Description: SigmaTel Audio Driver

  Driver update Site: OEM - no to http://www.freescale.com/webapp/search/Serp.jsp?SelectedAsset=Downloads

  --------------------------------------------------------------------------------------------------------------

  
  
  --------------------------------------------------------------------------------------------------------------
  TuneUpUtilitiesDriver64 TuneUpUtilitiesDriver64.sys Fri may 25 06:28:19 2012 (4FBF5EC3)

  Please uninstall immediately. This program seems to do more harm than good to your system.

  Delete completely using Revo Uninstaller.

  REVO UNINSTALLER (FREE)
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  After uninstalling this program, open a command prompt and run the file system (CFS) Checker to verify the intergrity of your system files.

  Remove AVG and replace with Microsoft Security Essentials to see if some of your performance problems are resolved. If you decide that you don't see any remarkable improvement, you can always reinstall AVG.

  Utility to remove AVG.

  http://www.Avg.com/us-en/utilities

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  If you decide to replace AVG and after completely removing TuneUpUtilities, run (SFC.exe) System File Checker tool to verify the integrity of your system files...

  How to run SFC.exe.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  You monitor the system and let us know if you have any other questions.

• IdeaPad S500 Touch - screen goes black after driver update

  I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo appears on the screen, and it goes black again. No matter what I try, that's all.

  Does anyone have a suggestion?

  Thank you

  James

  Hi Scoutmaster316,

  Welcome to the Community Forums of Lenovo!

  You will need to restart the system in safe mode.

  There is the only option to boot your situation is down to the system startup

  When you turn on the system, Lenovo Logo appears then black screen maybe wait a minute hold it the power button down until the accident it you must reapeat this 4-5 times until it starts to a page like this

  

  Once you have got to follow these choices that

  Troubleshooting / Advanced Option / start parameters

  Then you should rerach options with, select Safe mode which.

  If the driver is the problem, you should be able to start here,

  Open the Device Manager and rollback video driver

  Concerning

  Solid Cruver

• STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000) error after installing graphics drivers

  After installing my latest drivers for graphics card, restarting my computer to reflect changes, as it starts a blue screen because of a STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000) error and he said also he is dumping physical memory. I can easily get rid of this error of system restore, but I need my graphics drivers to play games and to load certain programs.

  PS: If it helps my computer sometimes freezes during startup

  Hello

  Check with support of the manufacturer to system and device video/display as they
  are those who write the drivers. Also check with their forums as it could be called
  questions. These companies write drivers.

  For the problem of freezing at startup.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• HP 2000 laptop screen goes black after entering the password

  After I enter password screen goes black

  Ok. I'm in the menu boot options. I have Manager ser of the OS startup. ERIC file boot. It says press F10 for BIOS Setup options, ESC to get out. What should I do?