VM.name attribute copy to another attribute vm_new.name

Similar Questions

• Creating a planning as one copy of another application

  Gurus,
  I need to create a new planning application, and most of the dimensions would be a copy of another that we already have.
  I can simply do an export using the Outlineload export from the existing, then use outline support for import to the a new right?
  or should I do something else.
  What about the UDAs, etc do I need to do something?
  Thank you

  Just make sure that the formulas are in one line. If you have a multi line formula then the csv file will move in a different line.

  Concerning

  Celvin
  http://www.orahyplabs.com

• I have enabled Acrobat XI since June 2013. How can I install second copy to another computer?

  I have enabled Acrobat XI since June 2013. How can I install second copy to another computer?

  You can install it on another machine the same way that you install on the first machine.  If you need to download to do this, you should have a link available on your Adobe account online.  If you are unable to find such a link, you can always download the trial version from the Acrobat (http://www.adobe.com/products/acrobatpro.html) product page and use your serial number to activate to use fully.

  If there is another problem that prevents you from know how to install it, you need to explain what the problem is.

• Rename the file in Oracle Forms before copy on another drive

  Dear all seniors
  I want to ask how to rename file before copying it to another drive.
  In fact when we get the drive to open file then it this time before copy I want to rename it.
  -This code that I use for the copy of the first path to the other file.
  DECLARE
  filename VARCHAR2 (500);
  BEGIN
  filename: = GET_FILE_NAME (File_Filter = > ' files (*. *) | *. * |');
  READ_IMAGE_FILE (filename, 'None', 'IMAGE6');
  HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  END;
  I use this code it works fine, but I did ' t know how to use before you copy the file.
  host (' Rename cmd /c "" "|: block3.file_name |'") «' |: block3.file_name_n |'» " '); -file rename
  
  Thank you.

  Ghulam Yassen wrote:
  Dear all seniors
  I want to ask how to rename file before copying it to another drive.
  In fact when we get the drive to open file then it this time before copy I want to rename it.
  -This code that I use for the copy of the first path to the other file.
  DECLARE
  filename VARCHAR2 (500);
  BEGIN
  filename: = GET_FILE_NAME (File_Filter => ' files (*. *) | *. * |');
  READ_IMAGE_FILE (filename, 'None', 'IMAGE6');
  HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  END;
  I use this code it works fine, but I did ' t know how to use before you copy the file.
  host (' Rename cmd /c "" "|: block3.file_name |'") «' |: block3.file_name_n |'» " '); -file rename

  Dear Ghulam Yassen,
  As salamualikum
  > HOST ("xcopy" ' | "") name of file: ' (' \\172.172.0.4\Combo_pic\',no_screen);
  Change the line above with the following line. He renames as copy.

  HOST ('xcopy "'|| filename ||'" \\172.172.0.4\Combo_pic\'||:EMP_CODE||'.jpg',no_screen); ---here EMP_CODE is a column value.
  

  Above code renames in emp_code value.

  I hope this works...

  Hamid

• TOC copied from another document, can not update

  Hello

  I copied a table of contents of another document and when I try to update the new book, the table of contents do not appear as an option to update. I am using Framemaker 8 and I named the file the same name as the book (MASWTOC.fm and MASW.book) file.

  I tried to create a new table of contents and then import another table of Contents formatting, but it did not work. I only got a list of titles and numbers page directly behind them. So, I hope that there is an easy way to update the table of contents of another book.

  Thanks in advance for your help.

  Michael Randall

  You can not just copy in a table of contents because it is a system generated unique to the book - if you copy, the system may not have generated it.

  What you need to do is to complete the first method you have started. Delete the copy in the file, if it is still in the book.

  Add > TOC and choose the paragraph tags that you want to include. Generate the table of contents. As you have noted, it will not be formatted, but it must contain the correct tags and page numbers.

  Then, open the table of contents in the format already in the other book. In your table of contents new, file > import Formats and bring everything except the Document properties to.

  Save the file. The book was updated. The table of contents should now contain the correct information so the correct formats.  If the subjects and page numbers are always grouped together, 1.) Check the reference page for the TOC file to make sure that there is a tab stop between the variables that control the info. (and 2.) check the paragraph tag (for example, Heading1TOC) in the Designer section to make sure that there is a tab stop. This is where you place the page number, leadering and so on.

  If you need to make changes, SAVE THE FILE, and then update the book again once.

  Another method that may work for you, but is not as reliable as the one above:

  Close the FM.

  In Windows, delete the TOC file generated in your new book dirctory. (You must already have a TOC that is generated it for this work.)

  Then copy to your table of old contents to exactly the same name as the generated file, you just deleted. It must be exactly the same name.

  Start FM, open the book and update.

  Art

• New filter: sending a copy to another email address?

  Dear Thunderbird support team,

  I wanted to set up a filter to send a copy of the email from a particular sender to another address of e-mail (in the same company), but I have not found such option. There is only a possibility to transfer mail to another address.

  Is it not possible to add it in the next version please?

  Thank you.

  We wish you the best of luck,

  Lenka Krivankova
  Czech Republic

  Try this add-on:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/redirectfilter/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Automator: Take pictures Photos.app (first library) and copy from another library

  I have my library of Photos on an external drive. I want to have a second library of Photos on my MacBook with only my favorites (favorite Album). If I can access it without my external HDD plugged! In Automator, there is an action called "Get Album favorite content ' but I can't choose where library. Anyone know how I can do?

  If you can access these two libraries with the paid version of PowerPhotos you can copy the favorite album from one library to another.  However, you decide to copy the original file or the edited version.

  

  Other wise export Photos in album Favorites in a folder on the Destkop.  Transfer this file MacBook and import in the library.  Yet once, you can choose to export the original or edited versions.

  

• Sub - VI copy to another file

  I wrote a program that you call several of the Subvi. For the record, I copy all the files to a new folder before that I make changes, but calling the Sub - VI path from the main program is still in the old folder. Is it possible to make the main program calling the Subvi contained in the new folder (where is the new main program)?

  Thank you.

  Angelia

  Try to rename the old folder to something else temporarily so your VI will not be able to find the Subvi when first loading. Now load your VI.  He will spend time searching the Subvi, but cannot find them (because the folder no longer exists under this name of origin.)  Navigate to the new folder and choose the Subvi has from there.  You can or can not do this a few times more for the other Subvi, which it does not.

  Once you are finished, close and save your VI, now all the Subvi should be linked to the new locations.

  Why you copied everything into a new folder?  You can make a backup to the new location on your project file.  Consider "save the source distribution".

  If I have something to copy in order to perform a backup.  I have to do when everything is closed and copy the whole project folder to a new location.  The new location with the new name is now my back and I make no change in the original folder, so that I don't have to worry about restoring links of any Subvi.

• Copy to another ASA config

  We have a remote access VPN, using Cisco VPN client in our test environment.  Everything works fine.  We were able to connect to the Cisco VPN client and access to internal resources.  However, we want to copy the same configuration on an another SAA.  We want to use the same group strategies, same tunnel groups, etc.  We only need to change the outside interface IP and default gateway of the outside interface. Another word, we want to keep all the same.  If you copy the same configuration to another ASA (production), we need to change anything else?   Thank you.

  Well Yes, the nat rules, here is a small tip

  get all the config and open it in Notepad, do a find for the public ip or public ip network address and it will tell you what to replace

• content of the copy to another document certain layer

  Hello people I did more code,

  This is a batch script

  I want to copy all content from one document to the other.

  My problem is to activate a certain layer

  Could someone help me?

  see code here

  [code]

  textLayer = app.activeDocument.layers.add ({name: "TT_IDML"});

  var docSource = app.activeDocument;

  var myFolder = Folder.selectDialog ("Select folder")

  If (myfolder. Length == 0)

  {

  Alert ("selected file No.")

  Exit (0)

  }

  myFiles = myFolder.getFiles ("*.idml") var

  If (myfiles. Length == 0)

  {

  Alert ("No. InDesign files in the folder")

  }

  for (i = 0; i < myFiles.length; i ++)

  {

  myFile = myFiles [i]

  Alert (MyFile)

  App.Open (MyFile)

  var docTarget = app.activeDocument;

  var paletteObjects = app.activeDocument.layers [0] .allPageItems;

  App.Select (paletteObjects);

  App.Copy ();

  app.activeDocument = docSource;

  App.documents [0].layers.itemByName ("TT_IDML"). Select;

  app.pasteInPlace)

  }

  [/ code]

  Thanks in advance

  There are also controls, if the original layers must be used, if something is pasted.

  See the InDesign preferences.

  app.clipboardPreferences.pasteRemembersLayers = false; //or true, set this as you need it.
  

  See also:

  Adobe InDesign CS6 (8,0) object model JS: ClipboardPreference

  Download the documentation for DOM here:

  InDesign JavaScript help

  Or search the latest versions here:

  InDesign ExtendScript API (10.0)

  InDesign ExtendScript API (11.0)

  Uwe

• Copy to another Mac CS5?

  I bought CS5 in 2011 and now I want to copy it to another machine. I'm sure that I received an email with the file but I can't, I can't find a CD. Is it possible for me to copy anyway?

  You can download older versions from this link:

  More downloads>

  However, without the serial number, you can't do much with the downloaded files.

  Applications must be installed, they cannot be simply copied.  You must therefore serial number everything else you will get is a trial and you won't be able to use it after 30 days.

  I hope this helps.

• I need to remove a copy from another computer to activate

  I need help to disable a copy of Acrobat 8 for another computer to be able to install on our new computer.

  Please notify that Adobe has no phone support for this.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Paragraph of copy to another doc

  Dear friends,

  Yet once, I'm stuck in the jungle of objects and properties.

  I want to push a point (containing the character formats) in a table in order to get later (in another document) to paste here (probably several times). So I started with the simple case: get 1 para and look if the Clipboard:

  var gaBibliography= [];                           // bibliography lines from processed RTF
  // have the file with the formatted bibliography already open, and the bibliography starts in the first paragraph
  GetBiblioFromRTF ();
  
  function GetBiblioFromRTF () {                    // very rudimentary start ...
    var newDoc, pgf, pgf1, tRange, index;
    newDoc = app.ActiveDoc;
    
    pgf = newDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;  // get first pgf in flow
    
    gaBibliography.push(pgf);                        // for use in other docs/book
  // simulate later use in own function
    tRange = new TextRange;
    index = gaBibliography.length-1;
  //alert (gaBibliography[index]);                  // => object pgf
    pgf1 = gaBibliography[index];
    tRange.beg.obj = pgf1;                          // select it
    tRange.beg.offset = 0;
    tRange.end.obj = pgf1;
    tRange.end.offset = pgf1;
    newDoc.TextSelection = tRange; 
    newDoc.Copy (0);                                // "gaBibliography[index]" only ! no para contens
  }
  

  Although the alert reports gaBibliography [index] to be TFP stuff from previous french copy on the Clipboard (more time, it's just text, shaped no text).

  A PushClipboard() before the copy does not have something useful.

  I am again entangled in the vines.

  Klaus

  Hi Klaus,

  Take a look at line 20

  I think that it does not work. Try "tRange.end.offset = Constants.FV_OBJ_END_OFFSET" instead

• Copy to another mask layer

  Hello

  Is there a way I can copy a mask to another layer with all its keyframes? I'm looking for a quicker way to have to run a loop and setValueAtTime each keyframes. (I have a keyframe at each image and it would be a cumbersome process)

  Thank you

  If you want to copy the mask being, i.e. without changing anything (without shift of position, without change of scale etc.) most short way is probably to use an expression (thisComp.layer("MyRefLayer").mask (1) .maskPath, something like that).

  But if you want to change something in the coordinates of the path, you can probably escape looping through all of the keyframes.

  And if you really have a lot of keys, setValuesAtTimes by pieces of say 100 (fire in the dark), could be shorter than to set the keys one by one.

  Xavier.

• 'copy' in another data store using vSphere client

  do not use vCenter in this case, just gross ESX with the vSphere client.

  in the browser data store, we can transfer files, download files, move files, and delete files.

  is there a way to copy files from one to another data store in the vSphere client?

  

  Try right click and copy