VM on the same host and vSwitch talk internally?

Similar Questions

• vsga and vdga on the same host

  Hello

  Is it possible to have different pool created on the same host and have some VM (pools) that use VSGA and other virtual machines (pool) that are using VDGA on the same host?

  Yes it works very well! (Assuming you have at least 2 GPU:s or Board with more then a GPU as a K1 or K2)

  Linjo

• Internal network for clients on the same host?

  Is it possible to set up an internal network so that if the VMS and B are on the same host and tried to access B (or vice versa), all network traffic will be handled internally by ESXi without the need to go upstream?

  Hello

  This is the behavior by default when two virtual machines are on the same portgroup and in the same VLAN.

  Traffic will not leave the vSwitch in this case.

  If you want the virtual machines only isolate the virtual machines from the outside network, you can create a new portgroup for them and do not add physical network cards to the portgroup.

  This way, the virtual machines can communicate with each other.

  Tim

• VShield service Manager installation and vShield app to the same host ESXi

  Hello, I'm planning on vCloud Director assessment in a laboratory with only a single ESXi host.  When I try to install the app vShield service I get the following warning: do not install on a host or a cluster where the VC or the vShield Manager resides. This can cause network problems. The following IP address must be a unique IP address assigned to this unit of App vShield. Please do not use an IP address that is assigned to another machine, including the VC, vShield Manager or any ESX host. Using an incorrect IP address you will need to uninstall and reinstall App vShield on this host. My question is: is it is absolutely impossible to install vShield manager on the same host ESXi as the vShield Manager resides?  Or is it just a bad practice?  What are the ramifications of installing?

  It is a general practice to separate management and resources. What you see is just a warning. When there are very fewer resources available you can do. Make sure that you exclude from the required VM by referring to this post

  http://www.yellow-bricks.com/2012/03/17/excluding-your-vCenter-server-from-VShield-app-protection/

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• Method for patching only host ESXi4.1 and VC is on the same host

  Hello people,

  I'm patching one of the ESXi, 4.1.0 348481 and Vcenter Server 4.1 Update1 (VM) is sitting on the same host ESXi. Please let me know how I can this patch

  a single host as the Vcenter also will restart. I'm looking to patch manually rather than Update Manager. How patch manually the ESXi host as there is no rounds in ESXi and what serves the Cli. If his VCLI then what is the command for the application of patches and download link. I'm looking to get the procedure. Any help on this

  will be well appreciated.

  Thank you

  vmguy

  If you have another host, you can vMotion your VM vCenter to it, then use AUVS to patch.  If a stand-alone host, then you will need to turn off vCenter and all the guests and try the method below

  http://communities.VMware.com/people/vmroyale/blog/2010/12/27/single-use-vihostupdate-how-to-for-ESXi-4x

• The s/w and h/w on the same host iSCSI initiators.

  Hello

  Can someone tell me if both software and hardware on the same host iSCSI initiators and looking the same LUN is supported in ESX3.5U5, 4.0U2 and 4.1.

  If this isn't the case, please give me the URL of any article of vmware goes in the same.

  Thank you

  P Martin

  The closest would be on page 28 of the 4.1 "iSCSI SAN slot Guide.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_iscsi_san_cfg.PDF

  Because the software initiator ESX is definitely a charge adapter, this could be considered to be applicable.

  In spite of being is not clearly established, there is no summer tested enough to be considered as support even if there are no known issues.

  Andy

• VM to the communication of the VM on the same host

  I poured on the network and a few other discussions docs but I can't seem to find how VM to the communication of the virtual machine runs on the same host.

  If I have 2 VM on the same host in different subnets connected to the same vswitch can they speak directly? or have packets across the physical network and vice versa in? I don't know there must be a way for the s vm on the same host, vswitch speak directly, can someone please give me some advice on how it works and what are the limits.

  Thank you

  If it is plugged into the same vSwitch as what connect two servers on the same physical switch on different subnets, he won't have to work.  There must be some sort of Firewall / routing to have these two systems across different networks.

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

• MSSQL server VM cluster should be in the same host or different hosts with RDM

  Could someone me on how to place the code SQL cluster s VM with RDMs in ESXi hosts for advice.

  What is the best practice to place the SQL VM s in ESXi hosts.

  Affinity or an anti-affinite...?

  Appreciated your valuable answers.

  Depends entirely on the use case.

  • 2 MS SQL nodes on the same host to see the availability of the software
  • 2 nodes on different hosts to see the availability of the equipment

  I'd say MS Clusters on the same host (at the time of HA and vSMP FT) are redundant VMware features and represent an increase in management fees. The MS cluster on hosts provide something in addition to what VMware vSphere alone can provide!

• PowerCLi script to check if 2 virtual machines are on the same host

  Hello

  I'm nubby on PowerCLI and I would like to help in the construction of a script.

  The script should check if two virtual machines (named test1 and test2) are running on the same host in a vCenter and send a notification (email), if they do.

  Something similar with affinity / anti-affinite DRS rules (but not through the DRS enabled on vCenter).  My focus is on the affinity. In case this happens, I need vMotion one of them on an another ESXi host(manually or automated).

  What I have done until now is the following:

  Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, '

  @{N = "ESX host"; {E = {Get-VMHost - VM $_}}, '

  @{N = 'vCenter'; E={$_. "(ExtensionData.CLient.ServiceUrl.Split('/') [2]}}, '"

  @{N = "Datastore"; {E = {Get-Datastore - VM $_}} | `

  Export-Csv - NoTypeInformation C:\Scripts\file.csv

  That becomes all the VMS and export a CSV file information:

  Name	Cluster	ESX host	vCenter	Data store
  test2	cluster_test	ESXi_test1	vCenter_test1:443	datastore1
  Test1	cluster_test	ESXi_test1	vCenter_test1:443	datastore1
  For1.local	cluster_test	ESXi_test1	vCenter_test1:443	datastore1
  VM1.local	cluster_test2	ESXi_test2	vCenter_test1:443	datastore1
  VM2.local	cluster_test3	ESXi_test3	vCenter_test1:443	datastore1
  VM31.local	cluster_test3	ESXi_test3	vCenter_test1:443	datastore1

  Thank you.

  Try like this.

  $tgtVM = "test1", "test2".

  Get-VM-name $tgtVM | Group-object - property VMHost | %{

  if($_.) County - gt 1) {}

  $vm = $_. Group | Get-Random

  $esx = $vm. VMHost

  $tgtEsx = get-Cluster - $vm VM | Get-VMHost | where {$_.} Name - not $esx. Name} | Get-Random

  Move-VM - $vm - Destination $tgtEsx VM - confirm: $false

  }

  }

• Pairing of two VMS (always on the same host)

  
  I was wondering if you can marry two virtual machines together so that in the event of a host failure, they will stay together on the same host.

  You can create a rule to DRS for this (keep the virtual machines together). HA and DRS can complement eachother and in the event of a host failure, DRS will stay two VM together. For this purpose on the modification of your cluster settings part. See a screenshot here:

  

• How can I do to two clips have the same position and scale?

  I just first Elements 10 today, since I'm doing a video for work. I am a seasoned videographer (I am a fairly successful YouTuber), but not with Adobe products. At home, I use Cyberlink PowerDirector 13 (although that is seriously considering moving to Premiere Pro), but for the moment at work I use elements since it is the program that they have.

  One thing that elements can do that PowerDirector is automatically align the clips at the same time. What I need to do, it's got a picture (do not fill the entire screen) suddenly cut to a similar picture of the same size and position, of the effect that the only part of the image changes. In my program to another, all I had to do was put them at the same time, change the shape of the Pic 1 how I want it, move the 2 Pic and do align on the same size and position, then move 2 peak after another in the timeline panel. However, items not the snap to each other, so I have no idea how to put them in the same size and position, one after the other.

  How can I do this? If this can be done in two elements or Pro, I'm going to have to Pro since I use this feature a lot.

  Thanks in advance!

  -Michael

  Michael

  First Elements 10 on what operating system? What video/graphics card your computer use? If NVIDIA GeForce, so we talk 10/NVIDIA GeForce display and other problems related specifically to first Elements.

  But, so far away that...

  Each clip on the Timeline of 10 elements first has a range of properties that contains a sign of movement. The expanded Motion Panel includes settings for the clip Position and scale. among other things.

  Position of two values... (___) (_) first from right to left and from left to right... second for up down or down the most.

  Have you been to the Palette of the 2nd clip properties to set its Position and scale values must match the first element?

  Have you been there and done that?

  Please read and review, and so let me know if I've targeted to what asked you. If this isn't the case, please specify where I missed what you were looking for.

  We'll rethink the situation if necessary and provide screenshots if necessary.

  Thank you.

  RTA

• CAR-to-car cloning of EBS on the same host

  I'm running a car-to-car cloning of EBS on the same host... trying to run the below command, I get the errors below

  Perl adclone.pl component java=/db/app/oracle/product/11.2.0/db_2/jdk/jre = dbTier mode = stage=/db/app/oracle/product/11.2.0/db_2/appsutil/clone/ = dbctxtg=/db/app/oracle/product/11.2.0/db_2/appsutil/dev21_ifmisdbdev01.xml rmanstage = CUSTOM method / fra/STAGE/data/internship/rmantgtloc = + srcdbname FRA = dev2 pwd = apps showProgressode

  Logfile located at /db/app/oracle/product/11.2.0/db_2/appsutil/log/dev21_ifmisdbdev01/ApplyDBTier_09121455.log

  / 50% complete type system database Source key ("single" or "car").

  The system is identified as active CARS!

  Restoring the head node of RAC database on the new system via RMAN target...

  THIS PROCESS TAKES A LONG TIME TO COMPLETE AND DEPENDS ON THE SIZE OF THE SOURCE SYSTEM DB

  Enter the first phase to RMAN restore

  -50% finished

  Not able to run the first phase to RMAN restore!

  ERROR when executing apply...

  -bash-4: $1 tail-f /db/app/oracle/product/11.2.0/db_2/appsutil/out/dev21_ifmisdbdev01/restore-rac1.log

  ORA-19504: could not create the file "+ FRA/dev2/controlfile_dev2.ctl".

  ORA-17502: ksfdcre:3 cannot create the +FRA/dev2/controlfile_dev2.ctl file

  ORA-15001: diskgroup "FRA" does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-15055: unable to connect to the ASM instance

  ORA-27300: OS dependent operating system: open failed with status: 13

  ORA-27301: OS Error Message: permission denied

  ORA-27302: an error occurred at: sskgmsmr_7

  Complete recovery manager.

  operating system permissions

• Newspapers are not applied in the first physical availability of time on the same host

  Hello
  
  I have met many threads associated with this topic, but could not help meet me at good question, raising a fee.
  I'm setting up physical DB ensures for the first time. It is in the same host. Although I worked a little on the day before but did not get a chance to create new. I used the cold backup RMAN to restore the backup of the primary database. The version of DB is 11.2.0.3(32bit) and I create on Windows 7. The problem is that newspapers are not applied side sleep although I can find no error in the alerts log. Previously file associated password error was coming, but I solved that one.
  
  In the standby alert settings are similar to:
  process = 150
  memory_target = 500 M
  memory_max_target = 700 M
  control_files = 'D:\EDRIVE\STANDBY\STANDBY\CONTROL01. CTL.
  control_files = 'D:\EDRIVE\STANDBY\STANDBY\CONTROL02. CTL.
  db_file_name_convert = "D:\EDrive\PRIMARY\primary."
  db_file_name_convert = "D:\EDrive\STANDBY\standby."
  log_file_name_convert = "D:\EDrive\PRIMARY\primary."
  log_file_name_convert = "D:\EDrive\STANDBY\standby."
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  Log_archive_dest_1 = 'LOCATION is D:\EDrive\STANDBY\Arc ".
  LOG_ARCHIVE_DEST_2 = "SERVICE = VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = PRIMARY PRIMARY."
  log_archive_dest_state_1 = 'ENABLE '.
  LOG_ARCHIVE_DEST_STATE_2 = "DEFER".
  fal_client = "STANDBY".
  fal_server = "PRIMARY".
  log_archive_config = "DG_CONFIG = (PRIMARY, standby)"
  log_archive_format = '% t_%s_%r.arc '.
  log_archive_max_processes = 30
  db_recovery_file_dest_size = 4152M
  standby_file_management = 'AUTO '.
  undo_tablespace = 'UNDOTBS1.
  SEC_CASE_SENSITIVE_LOGON = FALSE
  Remote_login_passwordfile = "EXCLUSIVE."
  AUDIT_TRAIL = 'DB '.
  db_name = "primary".
  db_unique_name = "STANDBY".
  open_cursors = 300
  -----
  Side in primary school settings looks like when you start:
  
  process = 150
  memory_target = 712 M
  control_files = 'D:\EDRIVE\PRIMARY\PRIMARY\CONTROL01. CTL.
  control_files = 'D:\EDRIVE\PRIMARY\PRIMARY\CONTROL02. CTL.
  DB_BLOCK_SIZE = 8192
  compatible = "11.2.0.0.0."
  Log_archive_dest_1 = 'LOCATION is D:\EDrive\PRIMARY\Arc ".
  LOG_ARCHIVE_DEST_2 = "SERVICE = PRIMARY NOAFFIRM ASYNC VALID_FOR =(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME = STANDBY"
  log_archive_dest_state_1 = 'ENABLE '.
  LOG_ARCHIVE_DEST_STATE_2 = 'ENABLE '.
  fal_client = "PRIMARY".
  fal_server = "STANDBY".
  log_archive_config = "DG_CONFIG = (PRIMARY, standby)"
  log_archive_format = '% t_%s_%r.arc '.
  log_archive_max_processes = 30
  db_recovery_file_dest = 'D:\app\fast_recovery_area. '
  db_recovery_file_dest_size = 4152M
  standby_file_management = 'AUTO '.
  undo_tablespace = 'UNDOTBS1.
  SEC_CASE_SENSITIVE_LOGON = FALSE
  Remote_login_passwordfile = "EXCLUSIVE."
  db_domain = «»
  dispatchers = "(PROTOCOL=TCP) (SERVICE = primaryXDB)" "
  audit_file_dest = "D:\APP\ADMIN\PRIMARY\ADUMP".
  AUDIT_TRAIL = 'DB '.
  db_name = "primary".
  open_cursors = 300
  diagnostic_dest = "D:\APP".
  
  For backup RMAN and duplicate below are the commands that I used.
  While backup in montage mode
  RMAN target = /.
  run
  {
  allocate channel c1 type disk;
  allocate channel c2 type disk;
  backup of database format "D:\EDrive\RMANBACKUP\primary\%U".
  ARCHIVELOG backup all the format "D:\EDrive\RMANBACKUP\primary\%U".
  backup current controlfile to watch format "D:\EDrive\RMANBACKUP\primary\standby.ctl".
  }
  
  Then the restoration
  
  RMAN target sys/sys@PRIMARY auxiliary.
  
  Duplicate the database target for Eve dorecover;
  
  Also I added ensures Redolog 1 additional side sleep later because he did not show everything after mark select * from v$ standby_log;.
  Now, it's showing a.
  On the side of the day before, I heard THAT RMAN creates it.
  Please see below:
  
  Side eve
  --------
  
  SQL > alter database add standby logfile group 1 'D:\EDrive\STANDBY\standby\stb_redo01.log' size 100M;
  alter database add standby logfile group 1 'D:\EDrive\STANDBY\standby\stb_redo01.log' size 100 M
  *
  ERROR on line 1:
  ORA-01184: logfile group 1 already exists
  
  
  SQL > alter database add standby logfile Group 2 'D:\EDrive\STANDBY\standby\stb_redo02.log' size 100M;
  alter database add standby logfile size of 'D:\EDrive\STANDBY\standby\stb_redo02.log' of the 2,100 M group
  *
  ERROR on line 1:
  ORA-01184: logfile group 2 already exists
  
  
  SQL >
  SQL >
  SQL > alter database add standby logfile group 3 'D:\EDrive\STANDBY\standby\stb_redo03.log' size 100M;
  
  Database altered.
  
  Please guide me to understand the problem that's why set are not applied?
  
  Thanks a ton for your help beforehand.
  
  -Best regards,.
  Saha

  Transport is not executed on primary, because you log_archive dest parameter is not correct.
  Your problem here:

  log_archive_dest_2 string SERVICE=PRIMARY NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY
  

  You must change it to:

  alter system set log_archive_dest_2 ='SERVICE=STANDBY NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY';
  alter system set log_archive_dest_state_2=ENABLE;
  alter system  switch logfile;
  

  Change the setting and paste here the results, please.

   select process from  v$managed_standby where process like 'LNS%'; -- on primary
   select max(Sequence#)  from  v$archived_log; -- on both side
  

  Concerning
  Mahir

• Can migrate a virtual computer to another virtual hosted by the same host computer?

  Deal all,

  I have two questions and I need your help.

  (1) I wonder if a virtual machine can be migrated to another virtual machine that are hosted by the same host ESXi 5.0? (The host has a local hard drive). If possible, how?

  (2) if I have two stand-alone ESXi hosts (host A and B), each host has DAS (local storage) respectively. If the VLC Player is running on a virtual hosted by host A computer and playing a video stream from the Internet, (it is not at all access local storage). This virtual machine can be migrated to host B? (Suppose vCenter is installed)

  Any response will be appreciated.

  Cheng

  You can clone this VM VM A i.e (require vCenter or vmkfstools allows you to clone the drive ONLY) and name VM B. do you want on original VM. Something happened to A VM, VM B you Savior.

  vStorage the device (here). It will use your local or DAS.