VM Player 5 will not open session VM Workstation 10

Similar Questions

• Windows Media Player 12 will not open or read CD/DVD

  Excuse me, I know that I posted earlier but I accidentally hit the wrong button and it says has answered my question and it was not. I had a virus on my computer and it was cleaned professionally. Now my windows media player will not open. He also will not play a cd/dvd or existing music files on my computer. The icon appears on the screen, but nothing happens when I try to open it. I can't do a system restore because there is nothing to restore, my computer was completely wiped out. Someone suggested this below "Disable media features" reboot and then turn on again. I tried already with no luck. I'm also totally updated everything I could find to put on my computer up-to-date.

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. look for the entry called multimedia features and extend it by using the symbol. +.

  5. uncheck the box for Windows Media Player.

  6. click on OK.

  7 restart the PC.

  8. click on Start (lower-left) and then on Control Panel.

  9. click on programs and features.

  10. on the left side of the screen, click on 'Windows turn features on or off".

  11 look for the entry called multimedia features and to extend it using the symbol +.

  12. check the box for Windows Media Player.

  13. click on OK.

  14. restart the PC.

  I was afraid of that - "Configuration parameters can be set wrongly."

  On google, there are a few reports of this error message and I couldn't find any that it is resolved. I hope that someone else will be "the chip" with a solution. I'm sorry.

  There are some media player FixIt who might want to try (I have not had your specific problem and Ive not run the FixIt so can't say for sure).

  You can try things like a SFC/scannow , that can help, but I doubt it. I guess it depends on what the virus.

  You could check that the virus is actually went in downloading, installing, free update (update in the Admin) and running a scan with Malwarebytes , but if it was 'cleaned professionally"should be deleted. But unfortunately things that his attack can still be altered.

  You could try a test, to create a new user account 'test' and the connection through that to see if WMP works from this account. for example, it can be your user profile that has been damaged. If this account works WMP then migrate your data everywhere...

  If all goes well, a WMP expert will come to the rescue.

• Vista media player 11 will not open

  I am running Vista Home Premium SP2.   Whenever I try to start Windows Media Player 11, it does not open.  I tried the link and the actual file (IE: root/program files/windows media player/wmplayer.exe) and both do the same thing if I look at the Task Manager.  The program appears for a few seconds and quits immediately.  Never no windows don't open.

  I tried the setup_wm.exe file and it gives me the error: "there is a newer version of the player (11.0.6002.18311) already installed on your computer.  It is not possible to use an older (11.0.6002.18111) installation package to install files or repair your current version. »

  So that others that a relocation complete, what can I do?

  Hello

  Do you have an error message when you open Windows Media Player?

  You have made any changes to your computer recently?

  I suggest you follow the methods below and check if it helps.

  Method 1: Verify the file system (CFS) Run analyses and checks to see if it helps.

  http://support.Microsoft.com/kb/929833

  Note: System File Checker gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. If the cache folder is damaged or unusable, you can use the sfc/scannow, sfc /scanonceor sfc /scanboot orders to repair its contents.

  Method 2: Re-register wmp.dll file and check if it helps.

  (a) click Start.

  (b) type CMD.exe and right-click on it and select run as administrator.

  (c) Type Regsvr32 wmp.dll, and press to enter.

• Media Player 12 will not open

  Media Player isn't open, just get a flash screen which I can't see any word on or errors. Don't remember what who or where I was at in w7 but he says the WMP file was corrupt. Brings me a week when the boot manager was damaged and had to fix it from the disc. So, how can I fix the WMP12 because there is no download for it yet. I really want to play on a reload of the system. Going back would present a problem I had to reload the antivirus program, because it did not work well. Yes before ask you, I scanned the system in safe mode normal mode and from a command line, no problems found. There also seems to be a problem with winupdate as I had to run several times to get updates and there are only 9. Other then these w7 problem load with problem in vista64 at w7ul x 64 upgrade.

  OK, I think that I fixed it, or there's a new player on some of the virus programs detects it as potentually undesirables and eliminate something in it. I restored my system back 5 days and mediaplayer work but mcafee total protection had a problem. I uninstalled mcafee and installed the new copy, mediaplayer now has not worked again. catch 22. So I restored back further to find a place they both worked, no. I downloaded a mcafee utility to uninstall mcafee, as the regular method did not work for this restore point. Running and rebooted, mcafee has disappeared and worked mediaplayer. OK, after the call to mcafee, that they said as a temporary solution to create a mcafee policy on watching everything that had to do with media player. Fact and install a new copy of the use of mcafee that add the policy on. Now, I have both working, I then went and created a restore point for after installation. I'll pass on anything said mcafee on a permanent solution. Now off the coast, for other issues addressed in the center of the action.

• 1: 0x80042318__2 system restore error: Windows Media Player 11 will not work open__3: Internet Explorer 8 crashes when opening.

  I have these three questions of program after reinstallation of Windows Vista and tried (mostly unsuccessful) using Windows Easy Transfer to move and reinstall my programs and files. My computer had some problems before start, (it would be almost always gives me the blue screen at startup and go into Startup Repair). The Startup Repair wouldn't fix anything and just lose about 20 minutes of my time. Finally, he wouldn't even load at all and the Startup Repair did not help so I decided to reinstall Windows Vista. It worked perfectly until what stupidly, I decided to try and use Windows easy transfer if everything goes well "to" my programs this new copy of Windows Vista.

  So now my questions are: Windows Media Player 11 does not open. I don't see a thumbnails of videos that would open with Windows Vista either. Oddly, although I can use Windows Media Center very well. I also installed Quicktime player and it seems to work perfectly.
  It was not catastrophic but especially a gene. I use VLC player to manage most of my videos very well, but love using WMP before.

  Second: I can't create restore points at all. Once I try, I get this error message:
  "The restore point could not be created for the following reason:
  An error was detected in the copy Service VSS (Volume Shadow). The problem occurred while trying to connect with the VSS writers. Please check the event system service and the VSS service are running and look for errors related to event logs. (Ox80042318) Please try again. »

  Finally, for some reason any after the transfer, eventually after Internet Explorer automatically updated it will completely freeze when I open it. This is for me the prompt to open the session previously was crushed, and if I try that or close the dialog to open just the home page, it will freeze completely, even the blue circle next to the name of the tab to load.
  Fortunately, I have Firefox and Google Chrome installed, both work very well.

  Any help is greatly appreciated. I'm not entirely fretting on IE8 and WMP 11 but I feel really that less stressed if I know that I have a System Restore Point in case my previous numbers start to happen again.

  Here are my system specs, in case that dans le cas ou c' est is somehow useful.

  Dell Studio 1535 laptop
  Windows Vista Home Premium 32 bit
  Service Pack 2 recently reinstalled
  Intel Core 2 Duo 4 Ghz processor
  3 GB Ram
  4.0 Windows Experience Index/Rating

  Big thanks in advance to anyone who can give a glimmer of assistance. I tried searching on these issues online and found no help. My next step is the Dell technical support (.. don't looking forward not to y).

  Do you have these problems if you for testing purposes create a new user?

  Other things you can try after trying the suggestions "Sreenkanth T" is to run the ChkDsk program.

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found

  Windows Easy Transfer moves not installed third-party programs on the whole, he does that move their settings, your files and settings Windows.

  As you have just reinstalled Vista, where were your old programs and files (on which machine) when you used Windows Easy Transfer, you still have access to them?

  You have to maybe do the reinstall once more but forget your settings and just manually copy all of your data?  This way you will give you restart with no old parameters of any other machine?

  You can also consult the third-party program (costs a little money), but he can move everything, including the programs installed.

  PCMover
  http://www.laplink.com/PCmover/index.html

• Windows Media Player will not open or start

  Windows media player will not open or launch. Vista 32 bit operating system.  What can I do

  Windows media player will not open or launch. Vista 32 bit operating system.  What can I do

  It's difficulty it Center Microsoft solutions:
  http://support.Microsoft.com/FixIt/

  Note: click on the button of Windows Media Player. It will appear a list of possible applications difficult.

  If this does not help, you may want to repost to music and his article:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• El capitan will not open - full boot disk

  Hello

  My Macbook Pro 2015 will not open. I have El Capitan on it.

  The last time it was open, I was copying large files on it. Did not notice that the free space was not so. Thus, change some time to copy files, the screen freezes and I had to stop it by pressing the button of closing for a period of time.

  Now it wonder pass and then takes over to 100% and stay like that. I keep it like that for 1 and a half hour and still the same.

  I have fact/cheque:

  1 safe mode - does not work. I don't know why, and I'm wright.

  2 disk utility (cmd + R) - say that the mac player seems to be ok (first aid) and shows me zero free Ko. Think that's the reason why it does not start.

  3 terminal. Find my user >. Trash and delete the content thereof (rm - rf ~ /.) Trashes) and checked it was empty after. After restarting the same.

  4 El Capitan of loading of the external drive. Can't see hidden files (.) (Trash) even when I put the command in the terminal. I was able to remove the other files with this, which appeared on the external drive of the El capitan Trash and delete them from there to check the mac, 100 GB of free drive. Reboot and always the same time. Open Cmd + R-> disk utility again: zero free Ko. Why?

  Like most computers Mac needs space to run in, so boot from an external drive and delete (or move) at least 15 GB of your Mac. This should be enough to start, do not fill it up again

• Photos will not open the iPhoto library.

  Hello world.

  I try to open an existing iPhoto library that I register before I migrated to this new Mac Pro desktop, but the new Photos app it will not open. It gives me an error message and then I see a blank screen of Photos.

  How can I convert this iPhotos Photos library and why is - it doesn't happen automatically?

  Thanks in advance for your help.

  It gives me an error message and then I see a blank screen of Photos.

  What is the error message?  And where is your old iPhoto Library stored?

  If you try to open the library on an external drive, make sure that the drive is compatible.  The player must be in Mac OS extended (journaled) format and should not be used by Time Machine.

• The CD/DVD tray on my eMachinesT3616 will not open.

  The CD/DVD tray on my eMachines T3616 will not open.  Solution?

  Hello

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Media Player 11 will not play video

  Windows Media Player 11 will not play DVD-video or video files from a SD card.  I tried several update codec options, but none were successful, including the option offered by Microsoft (http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx?displang=en).  Windows tells me that a more recent update has been installed and refuses to go forward.

  Hi RonMcCulloch,

  ·         You receive an error message or error code?

  ·         What is the type of file you are trying to play?

  ·         The DVD I get recognized by the computer?

  ·         Did you do changes on the computer before the show?

  In the meantime, you can try to reduce hardware acceleration, and see if it resolves the problem. (Only if your video card supports hardware acceleration)

  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.

  b. click on settings Advanced , the Troubleshooting tab and then click change settings.

  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  d. click OKand then click restart now.

  Let us know if it helps.

• I've got qcad Professional installed but vista will not open save dxf files. I get dxf is not an application valid win 32. Is there any solution for this?

  I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
  Is this a common problem?
  Is there any solution for this?

  You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
  I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
  The correct procedure is:-
  Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
  There is no problem, with the exception of this incompetence of users.
  Thank you for your time and assistance.

• Media Player 12 will not remain full screen for more than 5 min.

  Upgrade Vista Ultimate to 7 Ultimate. Media Player now will not stay full screen for more than 5 minutes during movie playback. How can I fix this please?

  When presentation settings are turned on, your mobile PC stays awake and system notifications are turned off. I would not advice you constantly running in presentation mode because it does not allow your computer becomes idle (and display the screen saver) even when you do not do anything. He probably solved your problem because one of your application does not perform certain actions as before, because it's always 'think' that your computer is not idle.

  You should do something like this: check the settings for these two applications: Vaio update and Trend Micro (probably you can get there after right-clicking on the icon in the notification area and choose the appropriate context menu position). There should be some options when these applications are performing the update process. No doubt, one of them made when the computer becomes inactive if it may affect the mode full-screen. I guess that might be Vaio update, because I read that since version 2010, Trend Micro has been improved and should not cause this problem, but you should check the two of them. You should change the appropriate settings, so it will play the update process in another moment.

  There is also something else you can try. You can read this article: How to prevent the flight home in Windows programs . You can find how to prevent theft of focus programs, then perhaps it can also solve your problem. Maybe after the upgrade to Vista, specific registry key does not contain the appropriate value, and you must follow these steps to fix that:

  1. Click Start and then click run (or you can press Windows key + R )

  2. In the text box on the run window, type regedit and click OK. This will open the registry editor program.

  3. Find the folder HKEY_CURRENT_USER under my computer and click the plus sign (+) after the folder name to expand the folder.

  4. Continue to expand the folders until you reach the HKEY_CURRENT_USER\Control Panel registry key.

  5. Select the key of Office under Control Panel .

  6. On the right side of the screen, locate and double-click ForegroundLockTimeout DWORD.

  7. In the Edit DWORD value window that appears, set them value data: field to 30 d 40 .

     Note: Make sure that the Basic option has the hexadecimal value, when you enter the DWORD value.

  8. Click OK , and then close the registry editor .

  9. Restart your PC for the changes to take effect.

  10. From this moment on, programs should no longer steal focus from the window you are currently working.

• CC 2014 Illustrator will not open, gets stuck on the loading page

  My CC 2014 trial Illustrator will not open.

  He gets stck on the next page to load...

  

  I restarted my computer, out of the creative cloud, done all the updates, but still no progress.

  Suggestions for re - starting my illustrator would be more than welcome!

  Thank you

  Problem solved by session connect. Thanks a lot WENDY for the logon session. I appreciate really.

  The reason was "Duplicate fonts" that have been installed on the machine and fix policies duplicated using the application book fonts from MAC OS solved the problem.

  Kind regards

  Rambour

• Captivate (5) project will not open in the Web browser

  Hello

  In recent weeks, I can not open my projects in the web browser. Accept one of the projects (only questionslides), I searched for different settings but I couldn't find any differtens. When I publish the project in a .swf still the project will not open.

  When I will get an overview in the Web browser or to publish, the project opens in the Web browser and it looks like deletion of project in and out in not even a second. A quick overview of the background is visible. But I get no massage error something. And the White Tower page. To display an overview of the project in capitvate is not a problem.

  I hope someone could help me.

  Roanne

  Hello

  I don't know if you have Animations of text in your project? If so, you probably have problems due to the latest version of Flash Player. There is a fix that is not found in this Captivate blog post:

  Solution to seduce...

  Lilybiri

• Menus will not open

  After inserting a SWF (Insert-> Animation), my menu bar menus will not open when I click on them. There is no problem when I insert an animation of text or a caption section, just at the moment where I insert a SWF file as an animation. If I close and reopen the Captivate, everything works fine (until the next time I have insert a SWF file).
  
  I'm running Captivate 2.0 and have been since early December. This problem started just yesterday. I uninstalled and reinstalled Captivate, no change.

  Hi TrioRocks.com

  This happens because you have version 9 of the Flash Player. This is a known issue and I hope that the next version of Captivate will fix it.

  For now, fortunately there is a relatively painless solution. Simply click on an object in the library. Doesn't seem to matter who oppose. As long as something in the library panel gets momentary focus. Once you do, things should start to work again.

  See you soon... Rick