VM shows physical mode as unreadable RDMs after DRS put VM on new host

Similar Questions

• No network connection to the virtual computer after migration manually to the new host

  We have added six new hosts to our environment, and I was tasked to test connections of VIRTUAL LAN on each of them before we move VM production of their.  This is probably a simple problem, but I am new to VMWare and need help.  I already talked to our network guys, and he assures me that the physical switches are setup and working properly.  We work a vDS.

  I'm testing 14 VLANs on six new hosts.  All but one are constantly working.  (They all work on the hosts of origin which were in force before.)  I have a static IP configuration on my test VM and MAC is set to automatic.  I checked the MAC does not change when you migrate to other hosts and the VLAN correct is listed in the settings the VM network (it is not empty).  Him VLAN will work on three of the six hosts, but not all at the same time.  The strange thing is that guests at work are constantly changing.  For example, this morning hosts11, 12 and 14 may work, but this afternoon, that could change at hosts12, 14 and 16.  I don't understand why they would change on their own.

  My test consists of VM testing, migration manually, powering back, then he ping from my computer off.  Of course everything works when I get ping responses.  When I get no answers, the test of the virtual machine has a yellow exclamation mark on the network icon in the system tray.

  What should I do to fix this?

  How is the network configured?  You have a different NIC port/cable for each VLAN or Trunking used on the side of the switch?

  If you use circuits on the side of the switch, then your GRPE ports virtual switch a VLAN ID needs to match the vlan is underway to shared resources.  No matter if it's a standard switch or switch distributed... you still need this ID of vlan.

  I've seen the random question that you encounter if missing one or more of of the uplinks on the side of the switch the VLAN.

• RDM x 32 bit and x64bit (physical mode)

  Hello

  Is it possible to remove the physical mode of x RDM 32 2003 Standard edition bits and then add in the x 64 2003 standard edition OS? is supported and documented somewhere?

  A RDM is simply a pointer to a raw LUN on a storage system that is formatted with the comments of functioning of the NTFS file system (in your case). You can connect the LUN/RDM to any other VM that supports this independent file system if it is an OS 32-bit or 64-bit. You can even present such a LUN on a physical Windows host and it will work.

  André

• After the recovery of Windows XP, all images show encoded jpeg and unreadable

  I lost my hard drive, recover windows after the installation of the new hard drive, but all my photos on the FlashDrive (plugged when the incident occurred) came comme.jpeg.encoeded (file name) and are unreadable by any program that I can find. more than 200 photos have been lost!

  Run the command prompt and navigate to the images directory.  Then type

  Rename *. JPEG.encoded *.jpeg

  (Note the space after "Rename" and ".encoded" above is) and see if they will open in Windows then and show the images.

  Make sure you come out of encoded correctly, or how its spelled in the file extension.

  You can try one in Windows to see if it works without going through the command prompt, and if that's the case then you can do all 200 like that.

  Steve

• How to-disk snapshot RDM in physical mode and RDM issues.

  Hi all

  I want to upgrade a few VMS version 4 to 7 production equipment, so I can save them using vDR.

  One recommendation is to take snapshots of the necessary virtual machines before the hardware upgrade, I'm unable to do so because of the disc RDM in physical mode.

  I'm looking for the answers to the following questions:

  -How do we or can we change disc RDM in physical to virtual (all risks, process involved, etc...)?

  -How a US dismantle and mount RDM disk without losing any data?

  -Can we dismantle and mount RDM disk to a different virtual computer?

  -We convert RDM to a normal virtual disk on vmfs data storage?

  Enjoy your time reading/response.

  Ta

  Hi dia,.

  Please find the answers online.

  -How do we or can we change disc RDM in physical to virtual (all risks, process involved, etc...)?

  Remove the drive from RDM virtual machine and add the ROW again using virtual mode.

  (Do not select the option Remove evil in the virtual machine and delete the files from disk)

  -How a US dismantle and mount RDM disk without losing any data?

  Same as above. (if I understand your question)

  -Can we dismantle and mount RDM disk to a different virtual computer?

  Remove from VM-1 and add the VM-2 by using the VM settings.

  -We convert RDM to a normal virtual disk on vmfs data storage?

  Yes, we convert RDM on the virtual disk using the Migration (SVMotion). To do this the virtual machine must be powered off the coast of the State.

  Let me know what answers your questions.

  Concerning

  Satya

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• No mails a file with header showing the number of unread emails!

  My Mozilla Thunderbird works very well for several of my Gmail, Hotmail and Yahoo email accounts. However, for one of my Yahoo accounts, I have several records that show the number of unread in this folder but no mail mails that can be downloaded or shown on this particular issue. This problem exists in some of my personal files and the folder of mail "sent" as well. I checked the article on the disappearance of mail (http://kb.mozillazine.org/Disappearing_mail) but nothing there helps.

  Can someone help?

  Thank you very much!!!

  right click on the folder. Select properties, and then on the button repair to start.

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• RDM SQL 2012 Cluster VMs on separate host

  Greetings,

  I'm looking to use RDM for a SQL Cluster in 2012 and go though the process of adding storage the second node shared, I'm a bit confused.

  I'm referencing Document from VMware, "Setup for Failover Clustering and Microsoft Cluster Service". I'm following the steps under "Clustering of virtual machines between physical hosts.  So, I advanced and added my LUNS that are on shared in the ROW to the first node storage.  The next step is to add the hard drive the second node, but this process requires me to select "use an existing drive" and select records that represent the ROW that are stored in the data store where host1 exist.  The document indicates, "select physics like compatibility mode, and then click Next.  The only option I get is, choose the Mode: persistent, Nonpersistent, or None.  I don't have an option to specify the disk as is physical or not.  I did when I created the RDM for the first host.

  Also add the disks as RDM should I stored with the virtual machine (which is on the shared storage) or should I create a separate data store and specify the data store that is on the same shared storage.  Since each of the RDM are separate LUN on the shared storage, I think I'm curious to know if its better to choose the option to store in a different data store, then with node 1.

  Any clarification on this is greatly appreciated.

  See you soon

  I suppose you want to create SQL 2012 Cluster of virtual machines on physical hosts. Please see the steps below.

  I think that there is a typographical error in documents that you won't get the same " physical compatibility mode" option again The disc is already created with a physical as on VM - 1 compatibility mode. Now you have to go with the "select Mode: persistent ' on vm - 2. Once you are done with VM - 2, VM - 2 right click, select the hard disk and observe the compatibility mode is selected physics only.

  RDM disks can be stored on the same data store shared where virtual machines are created or separate shared data warehouses. As your wish where you want to keep. One thing must remember two data stores must be shared with the two physical hosts.

  Thank you

  Atul

• Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7

  Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made.  All the patches?

  Thank you

  Hello Launcher,

  Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.

  I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.

  I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!

• Cannot sync the ipod. "The file"iTunes Library.itl is unreadable because it was created by a newer version of iTunes"my IPOD 80 GB so old, it is obsolete?

  I finally got iTunes and Win10 together and was able to load the update of iTunes. I tried to sync my iPod (80 GB), but get the following: the file "iTunes Library.itl is unreadable because it was created by a newer version of iTunes."

  See the empty/corrupted after upgrade/crash iTunes library. This particular symptom is for the end.

  TT2

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway