VM to the another data store

Similar Questions

• How to change the vmdk in another data store

  for my vm four disks are there I want to increase disk capacity but there is no space on the data store

  Hello

  Solution is that you must change the drive to another data store and increase space.

  First findout in spatial data store is avaialble.

  Select the virtual machine and migration - migration datastore - Advanced - click the drive on which you want to increase space - browse - choose data store where space is available - finishing

  After migration - more space.

• Move the location of the VM swap file in another data store

  Hi all

  Was in a task to move the 1000 to the file location of VM swap on another data store which is newly assigned to Exchange us to the existing store database file that will be decommissioned.

  Eager to check if anyone has made movement swap of VM location of the files to a data store to another and that all measures taken to move.

  Require some VM downtime?

  Thanks in advance a ton.

  Yes it is possible without interruption of service to virtual machines.

  1. make sure that your cluster is configured to use swap data store specified by host

  2. take a host in the cluster in maintenance mode, change the location of the VM configuration file to point to the new data store

  3. do this for all hosts in the cluster

  When you vMotion a VM from one host to another the swap file will get moved to the new data store. Later when you take guests to the maintenance and return output mode, vMotion occurs for each computer in the cluster virtual and file is moved.

• displacement of the VM in another data store

  Hello

  We organize 2 5.5 vSphere hosts (VMware vSphere Essentials 5 Licensed for 2 processors (unlimited cores per processor) physical.)

  One of our data warehouses has insufficient free space on the disk.

  I'd be happy if someone could give me a little advice what is the best way to move or copy a virtual machine in another data store.

  Already, I read after KB, but he has not understood completely.

  VMware KB: Move or copy a virtual machine in a VMware environment

  Kind regards

  Roland

  Your screenshot shows that you are on the right track.

  As soon as you have turned off the virtual computer the

  dimmed options get turned on even on the essential.

  See you soon.

• VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

  Can you try to make a vmotion host and see if it gets resolved? If not, can you close the virtual machine and start again? I have seen this problem before and a stop and start resolved.

• Create the snapshot in another data store

  Hi all

  On ESXi 4, is it possible to create snapshot in another data store? The reason is that the current data store is almost full. Thank you.

  Hello

  As far as I know, the snapshots are always in the same place as the files of the virtual machine. Then, it is not possible to snapshots in the other data that the VM store.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Unable to scp - r of the local data store a host to another data store local host

  Using PuTTY to connect to the host server

  Running command to copy VM to a data store to another data store (the two DS hosted locally on 2 different servers)

  Error: are different major versions of Protocol: 2 vs 1

  -J' tried confirmed that the only protocol on two host servers are defined in Protocol No. 1 and as I use Putty I have the Protocol in 1 also, but the same error occurs.

  II

  1 - Check the SSH configuration on both sides and compare... (/ etc/ssh/sshd_config)

  The remote server will only accept v2 connections and you try to do

  a connection v1. So either enable support of the v1 on the remote side. Or use

  keys v2 and id_rsa/id_dsa.

  2. check the versions ESX & patch level you used on both sides (ESX 3 xx build xxx)

  3 - also, you can check ssh version of protocol running rpm - qa | grep openssh.

  Good luck!

  GM

• Moving a disk of the user in another data store

  Hello!

  I have an office pool that is used by a few users and now I discovered, as i wan't to upgrade the user drives my Netapp file server to use snapshots on them. Is there a way to move a disc of the user to its current location on the same os drive data store was a new data store?

  I know that I can put in place a new pool, but let the user discs when I do this, so this isn't an option.

  Anyone know how I can keep my user records, moving them to another data store?

  Currently a UDD cannot be moved the data to be backed up and restored. Alternatively, you can also turn on roaming profiles have the connection of the user in two places, once everything is in place, turn them off.

  WP

• Move-VM error: VM must be managed by the same VI servers as the destination data store

  I work with 2 ESXi servers and a single vCenter server with vSphere 6.0 Update 1 b; and PowerCLI 6.0 Release 2

  I have an a datacenter, cluster, vCenter and a vDS.  I need to pass the vCenter data store to another and get the error message:

  "Move-VM VM you are moving should be handled by the same server of VI as the destination container and the data store.

  Code looks like the following:

  $vctObj = to connect-viserver $vctIPaddress

  $esx1Obj = to connect-viserver $esx1IPaddress

  $esx2Obj = to connect-viserver $esx2IPaddress

  $vmObj = get-vm-name $vmname - Server $vctObj

  $destDSobj = get-datastore-name $destDSname

  Move-vm - vm $vmObj Datastore - $destDSobj - 'End' DiskStorageFormat

  I can migrate successfully from the virtual machine to vCenter data store through the VI Client, but PowerCLI left me speechless.

  Maureen

  Try to use the Server parameter on the Get-Datastore line

• Deployment uses the local data store

  The deployment of VIO works without problem, but one of the virtual machines (VIO-DB-0) is now in a local data store. I never chose this data store in the installation process.

  Is it possible to manually move the virtual machine? Is it possible to define the data store used for the management of virtual machines somewhere?

  Concerning

  Daniel

  Hi Daniel,.

  Take a look at VMware integrated OpenStack 1.0 Release Notes:

  • Installer gives priority to local storage by default
    When you set up the data for the database stores three virtual machines, VMware OpenStack Setup integrated automatically gives priority to a local storage to improve IO performance. For resilience, users might prefer a shared storage, but the installer does not clear how to change this setting.
  • Workaround: Before completing the installation process, the installer of VMware OpenStack integrated allows you to examine and change the configuration. You can use this opportunity to change the configuration of the data to the database store three virtual machines.

  If you have already installed VIO, AFAIR you should be able to manually move between data warehouses as long as you do not change VM itself.

  Note that there is rule anti-affinite, so you may not be able to move that VM in the same data store when no other VIO - DB resides.

  Another note is that if you turn off VIO-DB-0, mysql service will not appear automatically. you have to turn on manually by running "service mysql start" on the node itself, or run 'vioconfig start' of the SGD server.

  Best regards

  Karol

• Storage vMotion a VM except disk that is in another data store

  Hello

  I'm looking to convert a large number of virtual machines clones related to thick.  I decided the best way to do this is probably a simple a storage vMotion, but all the virtual machines have a secondary drive that is in another data store.  I have to make sure that disk #2 stays at its current location, while the machine virtual (Config and disk #1 files) are transferred to a new data store data store.

  I figured out how to move a virtual machine complete or a single disc but not a virtual machine under a disc.  I am able to make it through the advanced options of puissancela vSphere client so I guess it is techinically possible.

  Pointers or other ideas would be greatly appreciated.

  Kind regards

  Ty-

  You will need to use the API method, see for example Re: using several data stores, cannot migrate the vmx file in a data store

• Disk groups are not visible cluster. vSAN datastore exists. 2 guests (on 8) cluster do not see the vSAN data store. Their storage is not recognized.

  http://i.imgur.com/pqAXtFl.PNG

  http://i.imgur.com/BnztaDD.PNG

  Do not know how even tear it down and rebuild it if the disk groups are not visible. The discs are in good health on each host storage adapters.

  Currently the latest version of vCenter 5.5. Hosts running 5.5 build 2068190

  Just built. Happy to demolish and rebuild. Just do not know why it is not visible on the two hosts and the disk groups are only recognized 3 guests when more are contributing. Also strange that I can't get the disk groups to fill in vCenter. I tried two different browsers (chrome and IE).

  I have now works.

  All the identical 5.5 relies on ESXi hosts. All hosts are homogeneous CPU/sum of the prospects for disk controller / installed RAM/storage.

  I have work. I had to manually destroy all traces of the vSAN on each single to help host node:

  (1) put the hosts in maintenance mode and remove the cluster. I was unable to disable vSAN in the cluster, I made on each node host (manually via the CLI below) then disconnected web client vCenter and return to finally refresh the ability to disable on the cluster.

  esxcli vsan cluster get - to check the status of each host.

  esxcli vsan cluster drop - the vSAN cluster host.

  storage of vsan esxcli list - view records in the individual host group

  esxcli vsan storage remove-d naa.id_of_magnetic_disks_here - to remove each of the disks in the disk group (you can ignore this using the following command to remove the SSD only falling each disc in this host group).

  esxcli vsan storage remove s naa.id_of_solid_state_disks_here - this is the SSD and all the magnetic disks in a given disk group.

  After that, I was able to manually add hosts to the cluster, leave maintenance mode and configure the disk groups. Aggregated data of the vSAN data store is correct now, and everything is functional.

  Another question for those of you who still read... How to configure such as the VM storage strategy that migrates towards (or inspired) the vSAN data store will immediately resume the default storage policy, I built for VSANs?

  Thanks for anyone who has followed.

• Problem of migration of virtual machine of a store of data in another data store

  Hello

  I've migrated from the virtual machine to a data store to another data store
  but the virtual machine present in both store data even after migration successfully
  and when I stop the virtual machine, then it shows that in the new data store.

  Please tell us what could be the possible reason for the same

  Appreciate your quick response.

  Kind regards

  Hakim. B

  
  

  Dear all,

  Finally, I found the solution.

  I had stop the virtual machine, replaced by location always store with the virtual machine swap file and restarted the VM.

  Kind regards

  Hakim. B

• PowerCLI, vm of moving to the new data store

  Hello

  I have to move vm to a new data store

  What are the good commands powercli

  my version of my CV is 5.0xxxx

  Thanks for your help

  
  

  You can use the Move-VM cmdlet to move a virtual machine to another data store: for example:

  Move-VM - VM "MyVM1" - data store "MyDatastore1".

• After the migration of ESXi 4.1 to 5.0 Update 1, ESXi containing the missing data store

  I intend to upgrade to an ESXi 4.1 production host, but I want to run through an upgrade of test on a separate machine. I created this using a virtual machine and the upgrade went well. However, now when I insert my vSphere client, I don't see the data store that contains data to my VM.

  Before migrating to 5, I had 2 drives, a disk of 4 GB for ESXi, and a 40 GB drive for the data of the VM installation. I could see and access times stores via the 4.1 vSphere client, but once the upgrade only the VM data store is available. Is there a reason that this is the case?

  I've updated but has not changed the partitions of data store. I have selected to migrate and keep the VMFS store, which was VMFS-3. I also tried to add the store drive 4 GB with the customer data, but an error message: "the selected disk already has a vmfs data store or the host cannot perform a conversion of partition table.
  Select another disk.

  I found this article on error message: http://KB.VMware.com/kb/2000454 , but I never actually removed from the data store. With the help of the 5.0 ESXi update I can see the VMFS store on 4 GB drive, which should have about 3.2 GB of available disk space (the rest being used by the hypervisor).

  Recommended someone else try esxconfig-volume - the list, and then use the output to a mount (http://communities.vmware.com/message/1666168#1666168), but the list command had no output at all.

  I searched through the forums and Google but you saw nothing.

  ESXi 5 has a different architecture, and I think that the problem is the size of the disk (too small) and the partition of scratch required.

  Have a look here:

  • http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-installation-Setup-Guide.PDF (page 153)
  • http://communities.VMware.com/message/1848769
  • http://KB.VMware.com/kb/1033696
  • http://blogs.VMware.com/ESXi/2011/03/OPS-changes-part-5-scratch-partition.html

  HTH

  Sam