VM Workstation 11, Windows 7 SP1 and USB 3.0

Similar Questions

• I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  Hello

  1 are. what other applications you referring?

  I recommend you to uninstall Service Pack 1

  I suggest that you follow the steps mentioned below to refine the question causing third-party software (as applicable).

  Step 1:

  Test the issue in safe mode and check if the problem persists.

  Step 2:

  If your computer very well in safe mode functions, I would pt you your machine ├a State clean startup in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart your computer in normal mode

  See also: slow PC? Optimize your computer for maximum performance

• I bought a copy of Windows 7 Sp1 and I have installed on my laptop, is it possible to install it on my desktop?

  Hello

  I bought a copy of Windows 7 Sp1 and I have installed on my laptop, is it possible to install it on my desktop?

  You will need to buy another copy, even if it includes install media.

• 8.1 Windows 64-bit and USB 3.0 connection error

  What a nightmare for me after I bought my G2 470 Probook with little window 8.1 64 and USB 3.0.  After my installation to my new laptop, there are 2 questions, I am facing now:

  1. my external USB 3.0 drive may work correctly with my old laptop window 7 with USB 3.0 input. However, my exernal USB 3.0 drive cannot work proplery when I try to connect it to my new laptop with little window 8.1 64. It shows me he cut sometimes, sometimes connect often and I can't remove the drive safely

  2. once the laptop set in place, there are 3 partition of HP, which is Windows (c, recovery (D and HP tools (E. I want to allocate more space fo save my old photo, HP technician told me to compress and release (about 150 GB) space on my C:.))) Can I use the new disk successfully. However it seems that I can't have the window manually updated, so I'm concerned if this is the point of mian to create this problem.

  HP technicians can help here?

  N ° there is no need to go to a command line and it is not all the DOS commands that will help.

  Consider using the Windows system restore to return the operating system of your laptop to a date before the start of this issue. Choose a restore point dated before the redone problem surface. Use the charm of the search and the type of restore. Select create a restore point. The System Properties window appears. Click System Restore, as shown in the following image.

  

  

  Make sure that the option to Show me the restore points more has a check mark in the box. Choose the restore point that you want, and then click Next. It is safe and reversible.

  

• Impossible to install Windows Vista SP1 and SP2

  original title: update to vista SP1 and SP2 problem

  I have SP1 and SP2 update for vista problems.  I completed the destructive recovery and try to install the updates for my new system, but I get the error message and cannot complete the installation.

  Have you tried the manual download for SP1? Usually, if an update fails then by downloading and installing manually usually does the trick.

  I was able to find a set of steps for you to follow on the problem of Windows Update. I hope it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Update that installs get Windows 10 app Windows 8.1 and Windows 7 SP1 KB3035583 is NOT hidden

  Hello

  I have Windows 7 SP1, and because my computer is a netbook (small laptop) with only 2 GB maximum installable RAM, I don't want to upgrade to Windows 10.

  Nor do I want to find that I have any nagging application on my computer, which I find I become obliged often to answer, in order to re - hide the app.

  I have therefore configured as Windows Update settings:

  'Check for updates but let me choose whether to download and install them '

  I then "Hid" update KB3035583,

  and also confirmed that he had been placed in the: dialog "restore hidden Updates.

  I haven't used the system restore from the cache to update KB3035583,

  Yet it often reappears in the list of the optional updates available for installation,

  and then I have to hide it again!

  When KB3035583 reappears in the list of the optional updates, it also is more listed in the dialog box "restore hidden Updates", yet the other updates that I've previously hidden, remain in this dialog box.

  This problem only seems to affect KB3035583.

  This problem is normal?

  Any correction is likely?

  Is there a way to fix this?

  I hope to hear from anyone with a solution.

  Kind regards

  Ray333

  When KB3035583 reappears in the list of the optional updates, it also is more listed in the dialog box "restore hidden Updates", yet the other updates that I've previously hidden, remain in this dialog box.

  This problem only seems to affect KB3035583.

  Because updates automatically a mask itself as soon as MS Review and install a more recent version. I suggest to use use GWX Panel - ultimate Outsider to remove windows 10 messages.

• Windows 7 SP1 w/IE 11 freezes, slow performance with switching webpages, downloads, games run very slowly and when to play simple games (for example, CandyCrush Saga) it ignores the graphics and music.

  I have an older Toshiba Satellite laptop I found that, after buying new laptops, I return to my only older because of its speed of travel from site to site, download and never had any problems with games.  I was running Windows 7 Home Edition, IE 9.

  About a year ago, I decided to upgrade my Windows 7 Home Edition to Windows 7 Professional and updated my browser IE 11.  Laptop still has a large.

  Then about 6 months ago I started to receive messages when you enter a Web site that I need to install Flash Player to view the page.  I checked my modules and Shockwave or Flash Player have been activated and would download it again to display the Web site (which I had already visited several times without any problems).  This has happened on several different sites.  Then I started to receive messages that I needed to upgrade my IE8 browser to a newer version.  I checked HELP to make sure that I still installed IE11 and I did it, I started getting these messages more often then I went to the aid of Microsoft Office on what to do if your Web pages telling you to upgrade.  Basically, IE11 is reset or uninstall IE11.  Reset is not good so I tried the method of reinstallment.  I uninstalled IE11, went to the download page for Microsoft IE11 and proceeds to download IE11.

  I saw a message that I couldn't download IE11 because I need to Windows 7 SP1 or later or Windows server 2008.  Then, I went to Microsoft requirements for the installation of Service Pack 1 for Windows 7 and follow-up procedures one (i.e., uninstall Adobe Acrobet, disabling Microsoft Security Essentials and Windows Defender and firewall, etc.) and after the installation of SP1 for Windows 7, followed all procedures to know what to do after the installation of SP1.  Downloaded all the updates (which were more than 120) restarted and was satisfied with fluent how my laptop worked once more.

  After a week, I noticed my phone to talk more and more to load pages and would begin to get Windows Explorer "unresponsive".  It started with almost everything I opened and I tried to edit Web pages or click icon to redirect me to another window, I kept receiving "not responding".  Rose (Microsoft), what to do and monitoring tools to try to fix the problem.  Initially, the problem was to find for a few hours, then starting upwards.  After a few days, my laptop almost took 30-45 seconds to switch between the tabs or windows.  After a search through questions and answers in the Microsoft community and Microsoft Web pages, the bottom line was reinstall Windows 7 SP1.

  Yet once, uninstalled and reinstalled Windows 7 SP1 and again ran perfect for a few days.  I turned on computer laptop yesterday and noticed that it took a long time for the upcoming Windows logo and has a black screen for a few seconds before the logo appears.  Of course, out of nowhere, I went to IE clicked icon and took forever to get to Yahoo (which is my predefined Web page).  Each page, I'm going to again is freezing, "not responding" and very slow operation.

  It is so frustrating because I added not all programs at all.  I am running IE11, Microsoft Security Essentials, and that's all. Outside of Windows Defender, firewall, Explorer, Media player, etc..  Microsoft Security Essentials (I did a full scan) has detected no viruses whatsoever and I 264 GB 285 GB free on my C: drive.  Therefore, there is no problem with the free space.  I have deleted the old files, temp files, analyzed and defragmented my hard drive and am just lost as to what is the cause.  All my drives are underway and have no conflict with all devices.  If I go down my Windows Professional so I will not be able to download anything higher than IE9.  I love IE11 and am happy with Win 7 SP1 if only he would stay longer than 3 or 4 working days.

  Do you have any suggestions?

  Hello Karen,

  Please run a scan with the following programs to see if your computer is infected by a piece of malware or a Trojan horse:

  https://www.Malwarebytes.org/

  http://www.bleepingcomputer.com/download/adwcleaner/

  http://www.bleepingcomputer.com/download/junkware-removal-tool/

  Malwarebytes will be produced a journal, please can post here the link to it? Navigate to: C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\Logs and upload the logs to Ondrrive, which was the date of when you did the scan.

  For OneDrive help

  http://Windows.Microsoft.com/en-GB/Windows/Outlook/sharing-with-onedrive

  Start your computer in safe mode and see if your computer is always freezing.

  http://Windows.Microsoft.com/en-GB/Windows/Start-computer-safe-mode

  Ways to improve the performance of your PC.

  http://Windows.Microsoft.com/en-GB/Windows/improve-computers-performance

  Thank you.

• Photosmart D110: D110 fails to install on Windows 7 - not found USB harware

  Hi all

  I'll put up a new Dell Inspiron 5000 running Windows 7 SP1 and wanted to add a photosmart D110.

  I downloaded the full software package of HP, but after the installation starts, I get a message that I have not available a USB device on my computer. It's probably a detection problem since I was on two of the three USB ports without problems.

  Now, the printer should be used on the network, so the fact that the Setup program does not detect a USB device should not interfere with the installation.

  I'm stuck and would like to know what are my options, if any. Is there a way to force the installer to not seek the USB hardware, or to ignore the error if it is not found?

  Any help is appreciated!

  Thank you

  Hello

  Open the start menu and type folder in the search bar, open it showed "Temp folder.

  Open the last HP installation folder that begins with 7z (for example 7zs1234)

  Open the installation folder.

  You can search usbready.exe and rename the file in usbready.old.exe.

  Return to the main installation folder (for example 7zs1234) and double-click Setup.exe, now follow the installation and check for the difference.

  Shlomi

• "" Windows 7 SP1 - error Code: 0x800F0A12 "one or more components of the system service pack requires are missing.

  I tried to install windows 7 SP1 and I got this error:

  "One or more system components that require the service pack are missing. For more information, click on the link below. »

  I tried everything but to no avail. Reinstall my OS is not an option.

  Thank you!

  I think I'll skip this...

  Answer yourself, but please be aware that there will come a point in the not-too-distant future where the computer will not be offered new updates of Windows unless & until that SP1 is installed.

  Free unlimited installation and compatibility support is available for any questions related to the Service Packs of Windows 7. Availability of support chat, telephone or electronic mail differs depending on your location. Some questions may require more support to there have advanced a charge: https://support.microsoft.com/oas/default.aspx?&gprid=14496&&st=1&wfxredirect=1&sd=gn

  Welcome & thank you for your comments.

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer will not download windows vista sp1

  I tried the update of windows vista sp1, and it continues to fail. I even tried manually upgrade and still nothing. I recently bought an external hard drive and I thought that I formatted it to my pc and mac. Well my pc does not recognize it because sp1 is not installed. I can't yet do a clean restore and download windows vista because I don't have the CD. Is there anything I can do to receive sp1. I see that many people have had this problem.

  Hello

  How have you tried to manually install SP1?

  SP1, SP2, and then should be installed years ago

  ___________________________________________________________

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, IF it is still available.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Do not install Windows Vista SP1 with error 800F081F

  My computer has window Vista Home Basic 32-bit operating system.
  I try to install Windows Vista SP1, and opinion on the recording of history that Windows tried to install automatically it but not all the time. The error code is 800F081F. I need to install the SP1 and SP2 to install my new software "PeachTree". Help, please.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• New installation Windows 8 DVD to USB

  Recently I bought a new full version of Windows 8 (32-bit, 64-bit CD and the product key) to my new computer, but it doesn't have an optical drive (can not read the CD).  I am currently borrow a laptop under Windows (optical drive and USB port), the new copy of Windows 8, a flash of 8 GB and a new computer disk (USB port but no optical drive).

  A significant difference between what I'm doing and other guides preventing unchanged Windows on this laptop.  If possible, could someone help me get a way step by step of loading the boot of boot to the flash drive, so that I could then use the flash player and then start my copy of Windows 8 on my new computer via a USB port?  Remember, I don't want to download Windows on the laptop if I do not need.

  Thanks for any help, and I'm sorry if the answer was obvious, but the computers tend to confuse me.

  Hello

  One bit of information that is required is that the machine on which you install Win 8 using UEFI BIOS or not... This is a very large difference in the way the flash player is done...

  You might also need a program to convert an ISO Image of DVD if the machine doing this has not already something...

  Another option that may allow you to avoid using the borrowed machine and eventually need to install something, would be to download a Win 8 ISO and use your key... Discover the first reply on this thread...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/cant-find-Windows-8-ISO-image/b0ec3d23-59ee-446c-A441-f808680a1a36

  Unfortunately, a small program of Microsoft is required to do this as well, but it does not install... it works simply and can be removed...

• ThinApp on Windows 2008r2 sp1 remote share

  Hello

  I have problems to start some, not all, thinapps go to a remote share, that is stored on a windows 2008r2 file SP1 server. When the same Thinapp is located on a remote share, which is a Server SP2 from Windows 2003R2, they will start.

  If the Thinapp is local to the C drive on a windows 2008r2 SP1 and the sandbox is on %APPDATA%\microsoft\windows\sendto that is located on a remote share, it won't work.

  If the Thinapp is local to the C drive on a windows 2008r2 SP1 and the sandbox is local too, that it will work.

  If the Thinapp resides on a remote share, as well as the sandbox, wi will NOT work.

  All work in combination, when the remote server is a windows 2003R2 Server SP2.

  Example error:

  Details:

  ComputerName = xa012it.ak0120.local user = unspecified Logfile = Type of Application = Fehler EventType = 1 SourceName = Application error category = 100 CategoryString = Anwendungsabsturzereignisse EventCode = 1000 event ID = 1000 TimeGenerated = 20120320070004.000000-000 TimeWritten = 20120320070004.000000-Message 000 = Name der fehlerhaften application: M & I, WinEditor.exe, Version: 4.0.0.0, Zeitstempel: 0x2a425e19 name of fehlerhaften module: ntdll.dll, Version: 6.1.7601.17725, Zeitstempel: 0x4ec49b8f

  Ausnahmecode: 0xc0000005

  Fehleroffset: 0x0005b694

  The fehlerhaften process ID: 0 x 2228

  Startzeit der fehlerhaften application: 0x01cd0667114f3568 der fehlerhaften application path: S:\Thinapp\Project\M & I WinEditor 4.0\bin\M I WinEditor.exe path of the fehlerhaften module: C:\Windows\SysWOW64\ntdll.dll

  Berichtskennung: 516a1452-725a-11e1-b379-0050569e3b1d

  Windows event log

  Kind regards

  Roland

  There is a bug in version 4.7 related to forwarding sandbox on a network share.

  It is a known issue and it will be fixed in the next version of ThinApp.

• 11.1 workstation, Windows 7 SP1 x 64, EFI, the CD-ROM does not start

  Is Windows 7 x 64 supported as an EFI guest OS in my computer with hardware 11.1 virtual v11?

  I recently upgraded from Workstation v9 to v11.1.0 build-2496824 under my Windows 7 SP1 x 64 machine and tried to create a new guest Windows 7 support EFI and the installation media does not start to get the Setup will.

  The same boot on any BIOS type invited media and I tried Windows 7 and Windows 7 with SP1 integrated all directly from Microsoft, not custom ISOs and none of them will work under EFI, but will work under BIOS.  In the same way 2008 and 2008 R2 media starts if EFI is used.

  EFI VMs can boot media of Windows 8 and successfully towards the top (2012 etc.) but not the previous generation of operating system.

  I tried a few different things, such as starting the ISO from a disk share and local network.

  I tried all 3 variants of the dvd/cdrom: SATA, SCSI, IDE, including the legacy mode which I don't think that is really work because it is not verified when I go back to change the setting.

  I tried to install from the EFI shell initialization, but the media are not yet mounted under blk0 so I can't go any further.

  My boot device options are all configured properly and tried to force the virtual cdrom boot at startup without success.

  I also tried going through the physical CD-ROM mapping rather than the ISO file and not luck.

  My Setup seems to be supported, however the matrix of interoperability and compatibility points vs EFI BIOS support.  I know that Windows 7 supports UEFI then it should work and I've seen posts where people have deployed it successfully under different versions of workstation using the EFI emulation.

  I also tried with hardware virtual v10

  Both typical and custom installation modes recognize media but can't can at start up.

  Should I do the start method USB with a sort of generation of personalized media?

  Here is an excerpt from the log file where it seems just that it's not picking up on startup even though we clearly see the ISO it:

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: connecting sata0:1 to 'D:\WIN7SP1X64ENT.iso '. Type = 2 distance = 0

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Open: not a .dmg unencrypted file (footer signature 0 x 00000000).

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Close: max cached entries 8

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: check the status of the original physical media...

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: CDROM initial physical state is 1 (meaning)

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: PolicyVMXFindPolicyKey: policy file does not exist.

  I just want to know if it is actually supported and if someone else has this problem there.

  It was about 3.5 GB but I just downloaded a new copy on the site MS VL and apparently boot into EFI now.  Don't know how the ISO precedent (and other ISOs 2008) would work under BIOS but not EFI but it's good enough for me.

  Thanks to confirm support of the scenario mentioned however, I had thoughts seconds on this subject.