Problem video when shooting 40mm Canon EF f/2.8 STM
Hello.
When im film with T4i and Canon EF 40 mm f/2.8 STM during the movement of the image is not smooth, look at images attached.
https://www.YouTube.com/watch?v=ESzJmqgIO0s
When the filming of all good regular blows.
I don't speak of shaky video - its normal, I'm talking about this motion of step by step of the photo to the right.
Thank you very much for the help.
I was put to manual focus, so this isn't the issue. After the test series and a deeper investigation: it is a kind of Rolling Shutter, you can see a question similar here https://youtu.be/MQCMsdhlXC0?t=1m54s
The solution in my case is to downgrade the quality video 720 p 60 fps.
Thank you
Tags: Canon Camera
Similar Questions
-
Camera stay focused when shooting video
How do you keep the Rebel T3i in short, when shooting video of moving objects that are moving towards or away from the camera? I understand the Nikon D5100 has continuous autofocus, but the Canon EOS Rebel T3i doesn't have such a feature.
Hi jla930,
The AI Servo AF mode is for moving subjects when the focus distance continues to change. While you hold down the shutter button halfway, the topic will focus at all times.
To access this mode, press the arrow key to the right (AF) and choose "AI Servo", as shown below:
- Exposure is set at the moment the picture is taken.
- The selection of the point AF is automatic, the camera first use the central AF point to focus. During the development automatic, if the subject moves away from the center of focus, followed continues as long as the subject is covered by another area of focus.
-
When shooting video with a NEX - 5n, 6 or 7 on a tripod, it is necessary to disable the Steadyshot in the menu, or is the camera supposed to sense that she is on a tripod (like the small Sony Hv9x)? I ask because sometimes my video tripod with these cameras mounted seems to have a slight pulsation or flutter, I can't explain.
The SteadyShot function does not serve a purpose, while the camera is mounted on a tripod. Given that the tripod is stationary when you take a picture, there is no excessive movement to the camera. It is not necessary to use the SteadyShot function in this situation.
Sometimes involuntary blur can occur when you use SteadyShot, while the camera is on a tripod.
If my post answered your question, please mark it as an "accepted Solution".
-
Hi, I have windows 7 with explore 11 and system: Windows 64-bit, English, MSIE. My problem is when I click on a new video I get e message telling him that I have to update my Adobe Flash Player, if I click it and it takes me to your site for updates ok. I go through the steps 1 and 2 ok, but when the small screen for the Adobe Flash Player Downloader arrives, he remanins empty and nothing happens. So what to do the next update please.
Please do not post the same question more than once!
-
Creation of DVD Windows says it can't find videos when you try to publish
Problems related to Windows DVD Maker!
Problems related to Windows DVD Maker!
I made a movie in windows movie maker. Some video and music files had disappeared, so I find the files and video read smoothly without any problems. When I tried to publish it on a DVD in DVD creation windows, the message saying that it cannot find at least one of the files it contains and I have to locate the files and try again. I checked several times, but all videos and music are here. Windows DVD maker works for my other videos except this one.
I really need to make the DVD and can't make it work.
Help, please!Jast a thought... have you tried to copy all your
the source files in a single folder and then work from that
folder when you create the project in Movie Maker?Also, it may be interesting to try to publish (save) your
Movie Maker project in the. WMV or. AVI movie
put in a folder on your hard drive, then open
DVD Maker and import the finished movie. -
Bright colors, flashing video when previewing
Hello world!
To begin, let's assume that (rightly) that I am an enthusiastic amateur, learn the tricks of the trade. Speak simply and with kindness please
Then, when I edit a video and you want to change the color settings, my friend suggested I videos face and paste them above the main, use a blending mode can change the color of top videos correction. I tried, but when I do, I get this terrible flicker of different strong colours throughout the video, as a small problem. I can't take the screenshot, because sometimes only momentarily, when the video is in playback mode.
My research online, it seems perhaps have something to do with the GPU rendering. My friend told me she had the same problem, and when she changed "Made video and playback" on "Mercury Playback Engine software only", he fixed the issue. But who's going to slow down my minutes drastically, right?
Here's a screenshot of my model and osx mac version, in case this is useful:
Any help much appreciated, thanks!
Warmly
Nate
Hey Nate,
To answer your question, Yes, deactivating of GPU acceleration will significantly slow things down. I think for the reason that you see the flashing light is due to the blending mode you are using. Blend modes are very complicated, and they do very different things, depending on the situation. Is there a reason your friend suggested clips of duplication and the correction of the color of the edit page? Color correction effects are nondestructive, so there is no need to go to an effort of all that. You are using a recent version of first? If so, you have the large color workspace to help out you. If you use a version with colour (not Color Correction, it is another, and older workspace), you will see the sign Lumetri open on the right side of your screen. Transition to this workspace also allows a feature called "Selection follows read head" which means you don't have to click your clip to have the applied effect of color of Lumetri; all you need to do is rub your playhead to the clip that you want, and it will be selected. After you have your head on your clip you can start working with the Lumetri group, following an order from top to bottom (for the most part).
-
I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
I am importing video clips using my Canon XL1s in final cut pro. See the video, I hear the audio until it is imported. any suggestions?
danobtwo wrote:
See the video, I hear the audio until it is imported. any suggestions?
Do you mean during the import process?
There is no FCP X parameter to change the way THAT DV is imported.
I used to hear the audio import with Sony cameras but Canon may be a different story.
If the imported files are OK, then it can be a thing of Protocol firewire Canon.
Al
-
When shooting in burst mode high with my 7 D Mark ii, I do not get optimal performance... the buffer fills up fast and backup... while I can't take shots more... I disabled the quite high definition noise reduction... Usually, I only have an SD card in the camera. I do not use the other card slot... is it because I didn't have the fastest SD card... For those of you who shoot regularly 7 D Mark ii, make it a point to always shoot with a SAndisk SD 95 map... ? I'd get better performance if I used the slot for CF card or both?
IRIS says:
I'm shooting with a single card (SD), a Lexar pro 64 GB 150 MB/sec Class 10 and 3 inside the U (whatever that means), but I show a limit 16 popping up on my screen... so I do not understand... I'm shooting a low ISO... I have disabled noise reduction... I'm shooting a Standard picture style... I'm shooting RAW only... My battery is charged... Then why is it backup and buffering so often? I forgot something? is it's just that the CF card is faster? .... I doh't understand why I don't get the perfromance promised high 20 + something burst shots...
First of all, Yes, CF cards are faster.
Second, the number you see is the current buffer and does not include the write speed of your card.
The only way to tell what your real brightness issue is therefore to test.
Shooting RAW to SanDisk Extreme PRO 32 GB 160 MB/s UDMA 7 CF Card, I get about 30 shots before the outbreak slows. My viewfinder shows 15.
Note When your feature of gust of defined test cards your lens to manual focus (MF) because according to your settings of priority to focus the camera auto focus can slow or even stop your glow.
-
How to keep the background to the point when shooting indoor basketball on a 18-135 mm t5i
I'm new on this and so far I love my camera. However these shooting games is sometimes difficult. How can I keep the background blur. Sometimes using autofocus, he catches someone has arms that more than the topic and I miss the shot. How to avoid that. Your help is appreciated. Thank you
When you look through the viewfinder, you will see 9 boxes arranged in a pattern. These are the areas of focus. When you use all the points the camera checks all the points and see if there is something that he can focus on at this time. Then, he decides what is the topic and focus on that. Sometimes it will jump back between something in the foreground and background. But since the subject is usually at the forefront the camera will usually choose which background noise. In your case, something happens in the foreground and the camera which is selected as the update since it is the closest. Best way to remove is to be aware of all the AF points when shooting. If things are too dynamic to keep all 9 free points from anyway, then move to a single point AF:
If you want a specific choice of the update then change to read only the central point. There should be a button in the upper right corner that allow this. If you half press the shutter button, the camera will focus on what is at the center point. You can then recompose (if you want) and take the picture.
-
Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem
Hi susanearle,
You can try the steps in your previous thread about this problem?
Please let us know, thanks!
-
Problem video calls on Skype, any who help me figure the problem?
I'm having a problem video calls on Skype, what's the problem? does anyone else know this?
Suggest you ask Skype experts in their support of the communities forums.
http://community.Skype.com/T5/English/CT-p/English?profile.language=en&ShowForum=5
-
a problem is when I click on Skype tey say a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available
Hello
Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
There is also information and on the Skype Forums.There is an alert to update Skype system on the Skype homepage
http://www.Skype.com/intl/en-us/home?intcmp=AlogoSkype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/I hope this helps.
-
There is a problem with the driver for Canon PowerShot SD1200 IS. The pilot
must be reinstalled.Gerald
To allow us to help you better, please provide as much detail as possible about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are familiar with the subject and who are happy to help you.Prepare your question. He thinks through. Hasty-survey questions get hasty responses, or none at all.
What diagnosis have so far
An effective question you will get help read faster how hereSuggestions for asking for help on a site.
http://www.CatB.org/~ESR/FAQs/smart-questions.htmlBTW, I see you have cross posted this on Technet
http://social.technet.Microsoft.com/forums/Windows/en-us/a1bd86f2-6914-4cda-9e34-1e3abb75a33c/Canon-PowerShot-SD1200-is?Forum=tnfeedback
-
Activation problem occurs when I use Win7 via VMWare.
Hello guys,.
I use a Win7 Ultimate installed on my macbook through bootcamp. It is enabled and works well. However, the activation problem occurs when I use Win7 via VMWare. A solution that keeps popping up is to use the phone activation and wait for the representative of the other side to help.I am currently in Cambodia, and they have not MSFT representatives here to answer. I'm calling them (the Singapore not. and the Viet Nam not.) with my Skype credits, but I am unable to connect.Please advice!Thanks in advance!
Original title: activation issuesHello
I suggest you choose the near by countries and by calls to this phone number. If you do not have representatives MSFT, and then try another nearest selection of countries and calls for a number.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
Maybe you are looking for
-
When I open a new tab, it auto matically goes to yahoo. I don't like yahoo.
I use Firefox for some time and I've never had a problem with it. Recently, some settings that are apparently independent of my will to change. Everytime I open a new tab, he continues: http://search.Yahoo.com/?FR=freezetype=W3i_NA, 132, 3_6, tab % 2
-
Help! three digital controls by three Boolean values
Hi guys, I really need your help. I am trying to create a program where I can choose the button (A - Z and 0-9) keys three keypad and use in order to increase the 3 individual respective Boolean values into the light. I work for a while now. Here's m
-
After installing the Vista SP2, IE 8 does not work well.
After installing Vista SP2, IE 8 under my.live.com does not work. The pages do not FLOW RSS download, links on the page at the top are not active and usually IE has out crapped. I went to run a complete Internet security suite uninstall Trend Micro
-
help restore windows ive done something :/
-
How to stop the Simulator to become gray screen?
Hello In my application, I need to wait a long time for some background process. In the meantime, I don't want the screen to become gray after slowing to a long period of time. Is it possible to do?